Q650/Q651 – Front Lower Control Arm to Knuckle Joint Over-Torqued – 2016-2017 Land Rover Discovery Sport & Range Rover Evoque

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA Campaign Number: 16V889 Q650/Q651
Manufacturer Jaguar Land Rover North America, LLC
Components SUSPENSION
Potential Number of Units Affected 220

 

Control Arm Fastener may Fail

If the fasteners were to fail causing the knuckle to separate, vehicle handling may be affected, increasing the risk of a crash.

 

Summary

Jaguar Land Rover North America, LLC (Land Rover) is recalling certain model year 2016-2017 Land Rover Discovery Sport vehicles manufactured May 30, 2016, to August 24, 2016, and 2016-2017 Range Rover Evoque vehicles manufactured June 7, 2016, to August 26, 2016.

The affected vehicles have front lower control arm fasteners that may fail due to an assembly error, possibly resulting in separation of the steering knuckle.

 

Remedy

Land Rover will notify owners, and dealers will replace the hardware that connects the front lower control arm to the knuckle, free of charge.

The recall is expected to begin January 30, 2017.

Owners may contact Land Rover customer service at 1-800-637-6837.

Land Rover’s number for this recall is Q650/Q651.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if your Land Rover has a Recall

 

NOTIFICATION OF SAFETY RECALLS Q650 AND Q651: FRONT
LOWER CONTROL ARM TO KNUCKLE JOINT FIXING

13-DEC-16 NO.: SRE16-10 SEC.: RECALL MKT.: USA

 

 

Jaguar Land Rover North America, LLC has informed the National Highway Traffic Safety Administration

(NHTSA) of its intent to perform a voluntary Safety Recall involving certain 2016-2017 model year Land Rover Discovery Sport and Range Rover Evoque vehicles imported into the United States market. Information relating to the proposed Recall will be posted on the NHTSA website.

United States Federal regulations require that retailers must be advised of this Recall notification within three working days after government notification.

United States Federal law requires retailers to complete any outstanding safety Recall service before a new vehicle is delivered to the buyer or lessee. Violation of this requirement by a retailer could result in a civil penalty of up to $21,000.00 per vehicle.

This Recall Service Bulletin serves as notification to all Land Rover retailers in the United States that any affected new vehicles may not be sold and delivered for customer use until the Recall repair is completed.

 

DESCRIPTION OF ISSUE

An issue has been identified on a limited number of vehicles within the Affected Vehicle Range where the front suspension lower control arm fastener may fail due to a manufacturing process error.

 

AFFECTED VEHICLE RANGE

Discovery Sport (L550)
Model Year  ……………… 2016-2017
VIN:  ……………………….. SALCR2BG5GH626821-SALCR2BG1HH641625

Range Rover Evoque (L538)
Model Year  ……………… 2016-2017
VIN:  ………………………. SALVP2BG4GH158935-SALVP2BG9HH175876

A total of 220 vehicle are affected.

 

EFFECT ON VEHICLE OPERATION

Where the fastener has failed, the wheel knuckle could separate from the front suspension lower control arm which could affect vehicle handling and increase the risk of a crash.

 

SERVICE PROGRAM / REWORK ACTION

Owners will be notified by mail and instructed to take their vehicle to a Land Rover retailer who will replace the affected front suspension lower control arm-to-wheel knuckle fastener and apply the correct torque.

There will be no charge to owners for this action.

 

OWNER NOTIFICATION

Owner notification is expected to occur on or before 20 January 2017.

 

ACTION TO BE TAKEN

Check DDW to ensure that the vehicle is affected by this program prior to undertaking any rework action.

Retailers are required to HOLD affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale pending completion of the rework action. Jaguar Land Rover North America recommends that affected sales demonstrator and loaner vehicles are repaired before use and that used vehicles are repaired before sale.

Sold vehicles will be subject to the standard Recall notification and Recall bulletin process detailing the action required for vehicles in the hands of owners.

A Technical Bulletin will be published once repair instructions are finalized and all required parts have been procured. This Service Bulletin will be updated once this information is available.

Thank you for your cooperation in this matter. Jaguar Land Rover North America apologizes for any inconvenience this may cause.

 

SAFETY RECALL Q650 (NHTSA# 16V-889): LEFT HAND
LOWER CONTROL ARM TO KNUCKLE JOINT OVERTORQUED

22-DEC-16 NO.: SRE16-11 SEC.: RECALL MKT.: USA

 

Jaguar Land Rover North America, LLC has informed the National Highway Traffic Safety Administration

(NHTSA) of its intent to perform a voluntary Safety Recall involving certain 2016-2017 model year Land Rover Discovery Sport and Range Rover Evoque vehicles imported into the United States market. Information relating to the proposed Recall will be posted on the NHTSA website.

United States Federal regulations require that retailers must be advised of this Recall notification within three working days after government notification.

United States Federal law requires retailers to complete any outstanding safety Recall service before a new vehicle is delivered to the buyer or lessee. Violation of this requirement by a retailer could result in a civil penalty of up to $21,000.00 per vehicle.

This Recall Service Bulletin serves as notification to all Land Rover retailers in the United States that any affected new vehicles may not be sold and delivered for customer use until the Recall repair is completed.

THIS BULLETIN UPDATES SRE16-10

 

DESCRIPTION OF ISSUE                                   

An issue has been identified on a limited number of vehicles within the Affected Vehicle Range where the front left suspension lower control arm-to-wheel knuckle fastener may fail due to a manufacturing process error.

 

AFFECTED VEHICLE RANGE

Discovery Sport (L550)
Model Year  ……………. 2016-2017
VIN:  …………………….. SALCR2BG5GH626821-SALCR2BG1HH641625

Range Rover Evoque (L538)
Model Year  …………… 2016-2017
VIN:  …………………….. SALVP2BG4GH158935-SALVP2BG9HH175876

A total of 157 vehicles are potentially affected in the USA and Federalized Territories.

 

EFFECT ON VEHICLE OPERATION 

Where the fastener has failed, the wheel knuckle could separate from the front suspension lower control arm, which could affect vehicle handling and increase the risk of a crash.

 

SERVICE PROGRAM / REWORK ACTION

Owners will be notified by mail and instructed to take their vehicle to a Land Rover retailer who will replace the affected front suspension lower control arm-to-wheel knuckle fastener and apply the correct torque.

There will be no charge to owners for this action.

 

OWNER NOTIFICATION

Owner notification will occur on or before 20 January 2017.

 

ACTION TO BE TAKEN

Check DDW to ensure that the vehicle is affected by this program prior to undertaking any rework action.

Retailers are required to HOLD affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale pending completion of the rework action. Jaguar Land Rover North America recommends that affected sales demonstrator and loaner vehicles are repaired before use and that used vehicles are repaired before sale.

Sold vehicles will be subject to the standard Recall notification and Recall bulletin process detailing the action required for vehicles in the hands of owners.

Refer to Technical Bulletin Q650NAS, SAFETY RECALL: Left Hand Lower Control Arm to Knuckle Joint OverTorqued, for detailed repair instructions.

 

PARTS

NOTE: order only the expected percentage demand of parts identified and in quantities to perform only immediate repairs.

Provide the VIN in the Customer Material Number field for all parts orders.

DESCRIPTION PART NO. /

SUNDRY CODE

QTY. /

VALUE

EXPECTED % OF VEHICLES

REQUIRING PARTS

Bolt M12 x 130 – Range Rover Evoque (L538; Coupe, 5-Door) LR024506 1 100
Bolt M12 x 112 – Discovery Sport (L550);

Range Rover Evoque Convertible (L538c)

LR024747 1 100
Hex Nut M12 FY112056 1 100
Brake Caliper Bolt M12 x 42 LR058339 2 100

 

TOOLS

Refer to the Technical Bulletin noted above for any required tools

 

WARRANTY

NOTE: check DDW to ensure that a vehicle is affected by this program prior to undertaking any rework action. 

At the time of confirming a booking for vehicle repair, ensure that all outstanding Service Actions are identified to ensure the correct parts are available and adequate workshop time is allocated for repairs to be completed at one visit.

Warranty claims must be submitted quoting the Program Code together with the relevant Option Code from the table. SRO and parts information is included for information only. The Option Code(s) that allows for the drive in / drive out allowance may only be claimed if the vehicle is brought into the workshop for this action alone to be undertaken.

Repair procedures are under constant review and therefore times / prices are subject to change; those quoted here must be taken as guidance only. Refer to TOPIx to obtain the latest repair time.

Warranty claims must be submitted for payment within 30 calendar days of completion of the repair.

 

NOTE: check vehicle for program code Q651 eligibility. If eligible, perform and claim at the same time as this program.

PROGRAM

CODE

OPTION

CODE

DESCRIPTION SRO TIME (HOURS) PART NO. /

SUNDRY CODE

QTY. / VALUE
Q650 B Lower Control Arm Fastener – Left –

Renew

60.90.25 0.40 LR024506

LR024747

FY112056

LR058339

1

1

1

2

Q650 C Lower Control Arm Fastener – Left –

Renew

 

 

Drive in/drive out

60.90.25

 

 

 

02.02.02

0.40

 

 

 

0.20

LR024506

LR024747

FY112056

LR058339

1

1

1

2

 

Normal Warranty policies and procedures apply.

 

SAFETY RECALL Q650: TECHNICAL Q & A

 

Main Message: on certain 2016-2017 Model Year Land Rover Discovery Sport and Range Rover Evoque vehicles, the front left suspension lower control arm-to-wheel knuckle fasteners have received more than two torque and angle applications during assembly. This could cause the fastener to yield, resulting in premature fatigue failure and possible separation of the lower control arm-to-wheel knuckle joint. Drivers may report a knocking noise from the front of the vehicle. Where the fastener has failed, and joint separation occurred, vehicle stability and steering control will be compromised. The driver and driver assistance systems may not be able to control the vehicle.

Q1 Who do I contact if a member of the press contacts me about this recall?

A Please ensure that any Press enquiries are referred to the Jaguar Land Rover Corporate Affairs office.

 

Q2 Why is Jaguar Land Rover Limited recalling certain vehicles for this issue? 

A Where the fastener has failed, and joint separation occurred, vehicle stability and steering control will be compromised. The driver and driver assistance systems may not be able to control the vehicle.

 

Q3 Can you tell me more about what is wrong with the vehicles?

A The Direct Current (DC) tool was incorrectly indicating no torque and angle achievement in error. When the DC tooling which controls the applied torque and angle indicates a failure to achieve either correct torque or angle post torque application, the tool should only permit one further torque and angle application. If the correct torque and angle is not achieved following the second application, the fastener should be removed and a new fastener used. If the fastener receives more than two torque and angle applications, the fastener can yield so resulting in premature fatigue failure and possible separation of the joint.

 

Q4 How would the customer become aware of potentially having this concern?

A The driver may notice a knocking noise from the front of the vehicle.

 

Q5 Does this concern affect vehicle safety?

A These vehicles are being recalled because of the risk of a safety defect.

 

Q6 Has Jaguar Land Rover Limited received many complaints?

A Jaguar Land Rover has received a small number of customer complaints for this issue.

 

Q7 Have there been any accidents or injuries?

A Jaguar Land Rover is not aware of any reports of accidents, injuries, or fires.

 

Q8 How was the further condition discovered?

A The condition was first discovered following field reports.

 

Q9 How long has Jaguar Land Rover known about this problem?

A This issue was first known in October 2016.

 

Q10 Is the defect leading you to any concerns regarding the reliability of a system, which is supposed to be designed and engineered for the passengers’ safety? What type of measures are you planning to take?

A We have no concerns with the overall reliability of the vehicle. Jaguar Land Rover carefully monitors field data to ensure that any matters relating to safety and compliance are rigorously investigated.

 

Q11 What has Jaguar Land Rover done in production?

A The Work Element Sheet that details the assembly process and care points in the assembly plant has been updated to clearly instruct no more than one further attempt to apply torque and angle before replacing the fastener with a new part.

 

Q12 What will Authorized Repairers do to the vehicles?

A Authorized Repairers will replace the affected front suspension lower control arm-to-wheel knuckle fastener and apply the correct torque. Some vehicles require recall remedy actions to one side only; others to both sides of the vehicle. Two recall numbers (Q650 and Q651) have been allocated to differentiate those requiring left and/or right side.

 

Q13 Which vehicles are affected by this recall?

A ertain Land Rover vehicles manufactured at Jaguar Land Rover’s (UK) manufacturing plants within the following VIN range are potentially effected:
Discovery Sport (L550):  ………………………….  SALCR2BG5GH626821-SALCR2BG1HH641625
Range Rover Evoque (L538):  …………………  SALVP2BG4GH158935-SALVP2BG9HH175876

 

Q14 Are other Jaguar Land Rover models affected by these actions?

A No other Jaguar Land Rover vehicle lines are affected.

 

Q15 Are parts available to rework vehicles?

A The necessary parts are available for this repair.

 

Q16 How much will the recall cost Jaguar Land Rover?

A Cost was not a factor in deciding to recall these vehicles.

 

Q17 How do I know if my vehicle is affected?

A All owners of affected vehicles will shortly receive a letter inviting them to contact a Land Rover Authorized Repairer for the work to be carried out.

 

Q18 How long does it take for the vehicle to be inspected and repaired?

A Work will be carried out as quickly and efficiently as possible in order to minimize inconvenience to customers and is expected to take no longer than 45 minutes to complete. Naturally, due to dealer schedules, vehicles may be required for longer.

 

Q18 Can I continue to drive my vehicle safely until it has been recalled?

A Customers are advised to contact a Land Rover Authorized Repairer should they have any concerns regarding their vehicles.

Note: Please ensure that any Press enquiries are referred to the Jaguar Land Rover Corporate Affairs office.

 

SAFETY RECALL Q651 (NHTSA# 16V-889): RIGHT HAND
LOWER CONTROL ARM TO KNUCKLE JOINT OVERTORQUED

22-DEC-16 NO.: SRE16-12 SEC.: RECALL MKT.: USA

 

 

Jaguar Land Rover North America, LLC has informed the National Highway Traffic Safety Administration

(NHTSA) of its intent to perform a voluntary Safety Recall involving certain 2016-2017 model year Land Rover Discovery Sport and Range Rover Evoque vehicles imported into the United States market. Information relating to the proposed Recall will be posted on the NHTSA website.

United States Federal regulations require that retailers must be advised of this Recall notification within three working days after government notification.

United States Federal law requires retailers to complete any outstanding safety Recall service before a new vehicle is delivered to the buyer or lessee. Violation of this requirement by a retailer could result in a civil penalty of up to $21,000.00 per vehicle.

This Recall Service Bulletin serves as notification to all Land Rover retailers in the United States that any affected new vehicles may not be sold and delivered for customer use until the Recall repair is completed.

THIS BULLETIN UPDATES SRE16-10

 

DESCRIPTION OF ISSUE                                   

An issue has been identified on a limited number of vehicles within the Affected Vehicle Range where the front right suspension lower control arm-to-wheel knuckle fastener may fail due to a manufacturing process error.

 

AFFECTED VEHICLE RANGE

Discovery Sport (L550)
Model Year  …………… 2016-2017
VIN:  …………………….. SALCR2BG5GH626821-SALCR2BG1HH641625

Range Rover Evoque (L538)
Model Year  …………… 2016-2017
VIN:  …………………….. SALVP2BG4GH158935-SALVP2BG9HH175876

A total of 80 vehicle are potentially affected in the USA and Federalized Territories.

 

EFFECT ON VEHICLE OPERATION 

Where the fastener has failed, the wheel knuckle could separate from the front suspension lower control arm, which could affect vehicle handling and increase the risk of a crash.

 

SERVICE PROGRAM / REWORK ACTION

Owners will be notified by mail and instructed to take their vehicle to a Land Rover retailer who will replace the affected front suspension lower control arm-to-wheel knuckle fastener and apply the correct torque.

There will be no charge to owners for this action.

 

OWNER NOTIFICATION

Owner notification will occur on or before 20 January 2017.

 

ACTION TO BE TAKEN

Check DDW to ensure that the vehicle is affected by this program prior to undertaking any rework action.

Retailers are required to HOLD affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale pending completion of the rework action. Jaguar Land Rover North America recommends that affected sales demonstrator and loaner vehicles are repaired before use and that used vehicles are repaired before sale.

Sold vehicles will be subject to the standard Recall notification and Recall bulletin process detailing the action required for vehicles in the hands of owners.

Refer to Technical Bulletin Q651NAS, SAFETY RECALL: Right Hand Lower Control Arm to Knuckle Joint OverTorqued, for detailed repair instructions.

 

PARTS

NOTE: order only the expected percentage demand of parts identified and in quantities to perform only immediate repairs.

Provide the VIN in the Customer Material Number field for all parts orders.

DESCRIPTION PART NO. /

SUNDRY CODE

QTY. /

VALUE

EXPECTED % OF VEHICLES

REQUIRING PARTS

Bolt M12 x 130 – Range Rover Evoque (L538; Coupe, 5-Door) LR024506 1 100
Bolt M12 x 112 – Discovery Sport (L550);

Range Rover Evoque Convertible (L538c)

LR024747 1 100
Hex Nut M12 FY112056 1 100
Brake Caliper Bolt M12 x 42 LR058339 2 100

 

TOOLS

Refer to the Technical Bulletin noted above for any required tools

 

WARRANTY

NOTE: check DDW to ensure that a vehicle is affected by this program prior to undertaking any rework action. 

At the time of confirming a booking for vehicle repair, ensure that all outstanding Service Actions are identified to ensure the correct parts are available and adequate workshop time is allocated for repairs to be completed at one visit.

Warranty claims must be submitted quoting the Program Code together with the relevant Option Code from the table. SRO and parts information is included for information only. The Option Code(s) that allows for the drive in / drive out allowance may only be claimed if the vehicle is brought into the workshop for this action alone to be undertaken.

Repair procedures are under constant review and therefore times / prices are subject to change; those quoted here must be taken as guidance only. Refer to TOPIx to obtain the latest repair time.

Warranty claims must be submitted for payment within 30 calendar days of completion of the repair.

 

NOTE: check vehicle for program code Q650 eligibility. If eligible, perform and claim at the same time as this program.

PROGRAM

CODE

OPTION

CODE

DESCRIPTION SRO TIME (HOURS) PART NO. /

SUNDRY CODE

QTY. / VALUE
Q651 B Lower Control Arm Fastener – Right –

Renew

60.90.25 0.40 LR024506

LR024747

FY112056

LR058339

1

1

1

2

Q651 C Lower Control Arm Fastener – Right –

Renew

 

 

Drive in/drive out

60.90.25

 

 

 

02.02.02

0.40

 

 

 

0.20

LR024506

LR024747

FY112056

LR058339

1

1

1

2

 

Normal Warranty policies and procedures apply.

 

SAFETY RECALL Q651: TECHNICAL Q & A 

 

Main Message: on certain 2016-2017 Model Year Land Rover Discovery Sport and Range Rover Evoque vehicles, the front right suspension lower control arm-to-wheel knuckle fasteners have received more than two torque and angle applications during assembly. This could cause the fastener to yield, resulting in premature fatigue failure and possible separation of the lower control arm-to-wheel knuckle joint. Drivers may report a knocking noise from the front of the vehicle. Where the fastener has failed, and joint separation occurred, vehicle stability and steering control will be compromised. The driver and driver assistance systems may not be able to control the vehicle.

 

Q1 Who do I contact if a member of the press contacts me about this recall?

A Please ensure that any Press enquiries are referred to the Jaguar Land Rover Corporate Affairs office.

 

Q2 Why is Jaguar Land Rover Limited recalling certain vehicles for this issue? 

A Where the fastener has failed, and joint separation occurred, vehicle stability and steering control will be compromised. The driver and driver assistance systems may not be able to control the vehicle.

 

Q3 Can you tell me more about what is wrong with the vehicles?

A The Direct Current (DC) tool was incorrectly indicating no torque and angle achievement in error. When the DC tooling which controls the applied torque and angle indicates a failure to achieve either correct torque or angle post torque application, the tool should only permit one further torque and angle application. If the correct torque and angle is not achieved following the second application, the fastener should be removed and a new fastener used. If the fastener receives more than two torque and angle applications, the fastener can yield so resulting in premature fatigue failure and possible separation of the joint.

 

Q4 How would the customer become aware of potentially having this concern?

A The driver may notice a knocking noise from the front of the vehicle.

 

Q5 Does this concern affect vehicle safety?

A These vehicles are being recalled because of the risk of a safety defect.

 

Q6 Has Jaguar Land Rover Limited received many complaints?

A Jaguar Land Rover has received a small number of customer complaints for this issue.

 

Q7 Have there been any accidents or injuries?

A Jaguar Land Rover is not aware of any reports of accidents, injuries, or fires.

 

Q8 How was the further condition discovered?

A The condition was first discovered following field reports.

 

Q9 How long has Jaguar Land Rover known about this problem?

A This issue was first known in October 2016.

 

Q10 Is the defect leading you to any concerns regarding the reliability of a system, which is supposed to be designed and engineered for the passengers’ safety? What type of measures are you planning to take?

A We have no concerns with the overall reliability of the vehicle. Jaguar Land Rover carefully monitors field data to ensure that any matters relating to safety and compliance are rigorously investigated.

 

Q11 What has Jaguar Land Rover done in production?

A The Work Element Sheet that details the assembly process and care points in the assembly plant has been updated to clearly instruct no more than one further attempt to apply torque and angle before replacing the fastener with a new part.

 

Q12 What will Authorized Repairers do to the vehicles?

A Authorized Repairers will replace the affected front suspension lower control arm-to-wheel knuckle fastener and apply the correct torque. Some vehicles require recall remedy actions to one side only; others to both sides of the vehicle. Two recall numbers (Q650 and Q651) have been allocated to differentiate those requiring left and/or right side.

 

Q13 Which vehicles are affected by this recall?

A Certain Land Rover vehicles manufactured at Jaguar Land Rover’s (UK) manufacturing plants within the following VIN range are potentially effected:
Discovery Sport (L550):  ………………………….  SALCR2BG5GH626821-SALCR2BG1HH641625
Range Rover Evoque (L538):  …………………  SALVP2BG4GH158935-SALVP2BG9HH175876

 

Q14 Are other Jaguar Land Rover models affected by these actions?

A No other Jaguar Land Rover vehicle lines are affected.

 

Q15 Are parts available to rework vehicles?

A The necessary parts are available for this repair.

 

Q16 How much will the recall cost Jaguar Land Rover?

A Cost was not a factor in deciding to recall these vehicles.

 

Q17 How do I know if my vehicle is affected?

A All owners of affected vehicles will shortly receive a letter inviting them to contact a Land Rover Authorized Repairer for the work to be carried out.

 

Q18 How long does it take for the vehicle to be inspected and repaired?

A Work will be carried out as quickly and efficiently as possible in order to minimize inconvenience to customers and is expected to take no longer than 45 minutes to complete. Naturally, due to dealer schedules, vehicles may be required for longer.

 

Q18 Can I continue to drive my vehicle safely until it has been recalled?

A Customers are advised to contact a Land Rover Authorized Repairer should they have any concerns regarding their vehicles.

Note: Please ensure that any Press enquiries are referred to the Jaguar Land Rover Corporate Affairs office.

 

Q650NAS1

TECHNICAL BULLETIN

22 DEC 2016

 

INFORMATION

SECTION:

204-01

 

SUBJECT/CONCERN:

SAFETY RECALL: Left Hand Lower Control Arm to Knuckle Joint Over-Torqued

 

AFFECTED VEHICLE RANGE:

MODEL: MODEL
YEAR:
VIN: ASSEMBLY
PLANT:
Range Rover Evoque (LV) 2016-2017 149193-176766 Halewood
Discovery Sport (LC) 2016-2017 614589-642539 Halewood

 

MARKETS:

NAS

 

CONDITION SUMMARY:

SITUATION:

An issue has been identified on certain vehicles within the listed Affected Vehicle Range where the front left suspension lower control arm-to-wheel knuckle fastener may fail due to a manufacturing process error.

 

ACTION:

Retailers are required to HOLD affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale pending completion of the Service Instruction detailed in this Technical Bulletin. Unsold vehicles should have this performed as part of the Pre-Delivery Inspection (PDI) process but must have it completed prior to vehicle handover to the customer.

Affected vehicles already in the hands of customers should be updated at the next available opportunity.

 

PARTS:

NOTES:

  • Order only the expected percentage demand of parts identified and in quantities to perform only immediate repairs.
  • Provide the VIN in the Customer Material Number field for all parts orders.
DESCRIPTION PART NO.
/SUNDRY
CODE
QTY.
/VALUE
EXPECTED %
OF VEHICLES
REQUIRING
PARTS
Bolt M12 x 130 – Range Rover Evoque (L538; Coupe, 5-Door) LR024506 1 100
Bolt M12 x 112 – Discovery Sport (L550); Range Rover Evoque Convertible (L538c) LR024747 1 100
Hex Nut M12 FY112056 1 100
Brake Caliper Bolt M12 x 42 LR058339 2 100

 

SPECIAL TOOLS:

Refer to Workshop Manual/Service Instruction for any required special tools.

 

WARRANTY:

NOTES:

  • Check DDW to ensure that a vehicle is affected by this program prior to undertaking any rework action.
  • Check vehicle for program code Q651 eligibility. If eligible, perform and claim at the same time as this program.

At the time of confirming a booking for vehicle repair, ensure that all outstanding Recalls and Service Actions are identified to ensure the correct parts are available and adequate workshop time is allocated for repairs to be completed at one visit.

Warranty claims must be submitted quoting the Program Code together with the relevant Option Code. SRO and parts information is included for information only. The Option Code(s) that allows for the drive in / drive out allowance can only be claimed if the vehicle is brought back into the workshop for this action alone to be undertaken.

Repair procedures are under constant review and therefore times / prices are subject to change; those quoted here must be taken as guidance only. Refer to TOPIx to obtain the latest repair time.

Warranty claims must be submitted or payment within 30 calendar days of completion of the repair.

PROGRAM
CODE
OPTION
CODE
DESCRIPTION SRO TIME
(HOURS)
PARTS
/SUNDRY
CODE
QTY.
/VALUE
Q650 B Lower Control
Arm Fixing –
Left – Renew
60.90.25 0.40 LR024506
LR024747
FY112056
LR058339
1
1
1
2
Q650 C Lower Control
Arm Fixing –
Left – RenewDrive in/drive
out
60.90.25

02.02.02

0.40

0.20

LR024506
LR024747
FY112056
LR058339
1
1
1
2

 

Normal Warranty policies and procedures apply.

 

SERVICE INSTRUCTION:

CAUTION:

Nuts and bolts must be tightened with the weight of the vehicle on the suspension.

 

1

WARNING:

Make sure to support the vehicle with axle stands.

Remove the front left wheel (see TOPIx Workshop Manual section 204-04: Wheels and Tires – Removal and Installation – Wheel and Tire).

 

2

CAUTION:

Make sure the weight of the front brake caliper and carrier assembly is supported.

Remove the two bolts from the front left brake caliper carrier

Remove the two bolts from the front left brake caliper carrier and reposition the brake caliper and carrier assembly.

 

3

NOTES:

  • Take note of the orientation of the bolt.
  • Discard the used nut and bolt.

Remove and discard the nut and bolt from the front left wheel knuckle-to-lower ball joint interface

Remove and discard the nut and bolt from the front left wheel knuckle-to-lower ball joint interface.

 

4

CAUTION:

Make sure that a new nut and bolt are installed.

 

NOTE:

Make sure to install the new bolt in the same orientation.

Remove and discard the nut and bolt from the front left wheel knuckle-to-lower ball joint interface

Install a new nut and bolt to the front left wheel knuckle-tolower ball joint interface.

Torque – Stage 1: 80Nm Stage 2: 180°

 

5

NOTE:

Make sure that new bolts are installed.

Remove the two bolts from the front left brake caliper carrier

Install the front left brake caliper and carrier assembly.

Torque – Stage 1: 90Nm Stage 2: 120°

 

6

Install the front left wheel (see TOPIx Workshop Manual section 204-04: Wheels and Tires – Removal and Installation – Wheel and Tire).

 

7

Lower the vehicle.

 

Q651NAS1

TECHNICAL BULLETIN

22 DEC 2016

 

INFORMATION

SECTION:

204-01

 

SUBJECT/CONCERN:

SAFETY RECALL: Right Hand Lower Control Arm to Knuckle Joint Over-Torqued

 

AFFECTED VEHICLE RANGE:

MODEL: MODEL
YEAR:
VIN: ASSEMBLY
PLANT:
Discovery Sport (LC) 2016-2017 612686-641815 Halewood
Range Rover Evoque (LV) 2016-2017 159180-176858 Halewood

 

MARKETS:

NAS

 

CONDITION SUMMARY:

SITUATION:

An issue has been identified on certain vehicles within the listed Affected Vehicle Range where the front right suspension lower control arm-to-wheel knuckle fastener may fail due to a manufacturing process error.

 

ACTION:

Retailers are required to HOLD affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale pending completion of the Service Instruction detailed in this Technical Bulletin. Unsold vehicles should have this performed as part of the Pre-Delivery Inspection (PDI) process but must have it completed prior to vehicle handover to the customer.

Affected vehicles already in the hands of customers should be updated at the next available opportunity.

 

PARTS:

NOTES:

  • Order only the expected percentage demand of parts identified and in quantities to perform immediate repairs.
  • Provide the VIN in the Customer Material Number field for all parts orders.
DESCRIPTION PART NO.
/SUNDRY
CODE
QTY.
/VALUE
EXPECTED %
OF VEHICLES
REQUIRING
PARTS
Bolt M12 x 130 – Range Rover Evoque (L538; Coupe, 5-Door) LR024506 1 100
Bolt M12 x 112 – Discovery Sport (L550); Range Rover Evoque Convertible (L538c) LR024747 1 100
Hex Nut M12 FY112056 1 100
Brake Caliper Bolt M12 x 42 LR058339 2 100

 

SPECIAL TOOLS:

Refer to Workshop Manual/Service Instruction for any required special tools.

 

WARRANTY:

NOTES:

  • Check DDW to ensure that a vehicle is affected by this program prior to undertaking any rework action.
  • Check vehicle for program code Q650 eligibility. If eligible, perform and claim at the same time as this program.

At the time of confirming a booking for vehicle repair, ensure that all outstanding Recalls and Service Actions are identified to ensure the correct parts are available and adequate workshop time is allocated for repairs to be completed at one visit.

Warranty claims must be submitted quoting the Program Code together with the relevant Option Code. SRO and parts information is included for information only. The Option Code(s) that allows for the drive in / drive out allowance can only be claimed if the vehicle is brought back into the workshop for this action alone to be undertaken.

Repair procedures are under constant review and therefore times / prices are subject to change; those quoted here must be taken as guidance only. Refer to TOPIx to obtain the latest repair time.

Warranty claims must be submitted or payment within 30 calendar days of completion of the repair.

PROGRAM
CODE
OPTION
CODE
DESCRIPTION SRO TIME
(HOURS)
PARTS
/SUNDRY
CODE
QTY.
/VALUE
Q651 B Lower Control
Arm Fixing –
Right – Renew
60.90.26 0.40 LR024506
LR024747
FY112056
LR058339
1
1
1
2
Q651 C Lower Control
Arm Fixing –
Right – RenewDrive in/drive
out
60.90.26

02.02.02

0.40

0.20

LR024506
LR024747
FY112056
LR058339
1
1
1
2

 

Normal Warranty policies and procedures apply.

 

SERVICE INSTRUCTION:

CAUTION:

Nuts and bolts must be tightened with the weight of the vehicle on the suspension.

 

1

WARNING:

Make sure to support the vehicle with axle stands.

Remove the front right wheel (see TOPIx Workshop Manual section 204-04: Wheels and Tires – Removal and Installation – Wheel and Tire).

 

2

CAUTION:

Make sure the weight of the front brake caliper and carrier assembly is supported.

 

NOTE:

Front left shown; front right similar.

Remove the two bolts from the front left brake caliper carrier

Remove the two bolts from the front right brake caliper carrier and reposition the brake caliper and carrier assembly.

 

3

NOTES:

  • Take note of the orientation of the bolt.
  • Discard the used nut and bolt.
  • Front left shown; front right similar.

Remove and discard the nut and bolt from the front left wheel knuckle-to-lower ball joint interface

Remove and discard the nut and bolt from the front right wheel knuckle-to-lower ball joint interface.

 

4

CAUTION:

Make sure that a new nut and bolt are installed.

 

NOTE:

Make sure to install the new bolt in the same orientation.

Front left shown; front right similar.

Remove and discard the nut and bolt from the front left wheel knuckle-to-lower ball joint interface

Install a new nut and bolt to the front right wheel knuckle-to-lower ball joint interface.

Torque – Stage 1: 80Nm Stage 2: 180°

 

5

NOTE:

Make sure that new bolts are installed.

Front left shown; front right similar.

Remove the two bolts from the front left brake caliper carrier

Install the front right brake caliper and carrier assembly.

Torque – Stage 1: 90Nm Stage 2: 120°

 

6

Install the front right wheel (see TOPIx Workshop Manual section 204-04: Wheels and Tires – Removal and Installation – Wheel and Tire).

 

7

Lower the vehicle.

 

 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [39.29 KB]

 

 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [58.81 KB]

 

 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [58.82 KB]

 

 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [102.46 KB]

 

 

 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [103.24 KB]

 

 

Leave a Comment

Share to...