“This site contains affiliate links for which OEMDTC may be compensated” |
February 1, 2018
TPMS Settings Incorrect/FMVSS 138
If the vehicle fails to warn the driver of low tire pressure, driving the vehicle may result in tire tread separation, increasing the risk of a crash.
NHTSA Campaign Number: 18V088
Manufacturer Jaguar Land Rover North America, LLC
Components TIRES
Potential Number of Units Affected 190
Summary
Jaguar Land Rover North America, LLC (Land Rover) is recalling certain 2018 Land Rover Range Rover Evoque convertible vehicles equipped with 20-inch wheels. The Tire Pressure Monitoring System (TPMS) may be incorrectly set and thus may not illuminate the warning on the instrument panel when a tire’s pressure is 25% below the recommended cold inflation pressure. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 138, “Tire Pressure Monitoring Systems.”
Remedy
Land Rover will notify owners, and dealers will update the TPMS setting to correct the illumination setting, free of charge. The recall began on March 9, 2018. Owners may contact Land Rover customer service at 1-800-637-6837. Land Rover’s number for this recall is N164.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Land Rover has a Recall
SAFETY RECALL N164 (NHTSA 18V-088): TIRE PRESSURE MONITORING SYSTEM (TPMS) INCORRECT FOR 20-INCH TIRES IN INSTRUMENT CLUSTER (IC) | SERVICE BULLETIN |
21-FEB-18 | NO.: SRE18-05 | SEC.: RECALL | MKT.: USA |
Jaguar Land Rover North America, LLC has informed the National Highway Traffic Safety Administration (NHTSA) of its intent to perform a Safety Recall on certain 2018 model year Land Rover Range Rover Evoque vehicles imported into the United States market. Information relating to this Recall will be posted on the National Highway Traffic Safety Administration website.
United States Federal regulations require that retailers must be notified within a reasonable time after the manufacturer decides that a defect that relates to motor vehicle safety or a noncompliance exists.
United States Federal law requires retailers to complete any outstanding safety Recall service before a new vehicle is delivered to the buyer or lessee. Violation of this requirement by a retailer could result in a civil penalty of up to $21,000.00 per vehicle.
This Recall Service Bulletin serves as notification to all Land Rover retailers in the United States and Federalized Territories that any affected new vehicles may not be sold and delivered for customer use until the Recall repair is completed.
THIS BULLETIN UPDATES SRE18-04 |
DESCRIPTION OF ISSUE
An issue has been identified on a limited number of vehicles, fitted with 20-inch wheels, within the listed Affected Vehicle Range where the Tire Pressure Monitoring System (TPMS) pressure has been set incorrectly in the instrument cluster. The set instrument cluster stored pressures are employed by the TPMS system to determine pressure thresholds against which TPMS warning system activation should occur. The TPMS will not illuminate the warning telltale at the correct pressure when the tire pressure is 25% below the manufacturer’s recommended cold inflation pressure as stated on the Tire Placard. The TPMS system set pressure on the instrument cluster does not correspond with the correct information on the Tire Placard. The pressures stated on the Tire Placard are correct.
AFFECTED VEHICLE RANGE
Range Rover Evoque (L538c; Convertible)
Model Year: …………….. 2018
VIN: …………………………… SALVD5RX8JH256731-SALVD5RX1JH295452
A total of 190 vehicles are potentially involved in the USA and Federalized Territories. Visit the InfoTrail website for a list of affected unsold (as of 15 February 2018) vehicles.
EFFECT ON VEHICLE OPERATION
Operation of tires at low inflation pressures can contribute to separation of the tire tread. If the tread separates from the tire, the driver can lose control of the vehicle, possibly resulting in a crash.
SERVICE PROGRAM / REWORK ACTION
An authorized Land Rover retailer will download the latest Tire Pressure Monitor (TPM) module software to the vehicle. There will be no charge to owners for this action under this program.
OWNER NOTIFICATION
Owner notification is expected to occur on or before 23 March 2018.
ACTION TO BE TAKEN
Check DDW to ensure that the vehicle is affected by Program Code ‘N164’ prior to undertaking any rework action.
Retailers are required to HOLD affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale pending completion of the rework action.
Sold vehicles will be subject to the standard Recall notification and Recall bulletin process detailing the action required for vehicles in the hands of owners.
Jaguar Land Rover North America recommends that affected sales demonstrator and loaner vehicles are repaired before use and that used vehicles are repaired before sale. Retailers who choose to proceed against this recommendation, where legally permitted, must clearly and conspicuously disclose the open recall to the applicable customers.
Refer to Technical Bulletin N164NAS, SAFETY RECALL: Tire Pressure Monitoring System (TPMS) Incorrect for 20Inch Tires, for detailed repair instructions.
PARTS
No parts required.
TOOLS
Refer to the Technical Bulletin referenced above for any required special tools.
WARRANTY
NOTE: check DDW to ensure that a vehicle is affected by this program prior to undertaking any rework action.
At the time of confirming a booking for vehicle repair, ensure that all outstanding Recall and Service Actions are identified to ensure the correct parts are available and adequate workshop time is allocated for repairs to be completed in one visit.
Warranty claims must be submitted quoting the Program Code together with the relevant Option Code. The SRO and parts information listed have been included for information only. The Option Code(s) that allows for the drive in/drive out allowance may only be claimed if the vehicle is brought into the workshop for this action alone to be undertaken.
Repair procedures are under constant review and therefore times/prices are subject to change; those quoted here must be taken as guidance only. Refer to TOPIx to obtain the latest repair time.
Warranty claims must be submitted for payment within 30 calendar days of completion of the repair.
PROGRAM CODE | OPTION CODE | DESCRIPTION | SRO | TIME (HOURS) | PARTS / SUNDRY CODE* | QTY. / VALUE* |
N164 | A | Tire Pressure Monitor Module – Update | 86.91.48 | 0.20 | – | – |
N164 | B | Tire Pressure Monitor Module – Update
Drive in/drive out |
86.91.48
02.02.02 |
0.20
0.20 |
–
– |
–
– |
Normal Warranty policies and procedures apply.
TECHNICAL Q & A: SAFETY RECALL N164
Main Message: an issue has been identified with certain 2018 Model Year (MY) Land Rover Range Rover Evoque folding top vehicles equipped with 20-inch wheels. The Tire Pressure Monitoring System (TPMS) pressure has been set incorrectly in the Instrument Cluster (IC). The set IC stored pressures are employed by the TPMS system to determine pressure thresholds against which TPMS warning system activation should occur. The TPMS will not illuminate the warning tell-tale at the correct pressure when the tire pressure is 25% below the manufacturer’s recommended cold inflation pressure as stated on the Tire Placard.
Q1 | Who do I contact if a member of the press contacts me about this recall? | ||
A | Please ensure Press enquiries are referred to the Jaguar Land Rover North America Press Office to the attention of:.
|
||
Q2 | Why is Jaguar Land Rover recalling certain Land Rover vehicles? | ||
A | These vehicles are being recalled because, in the condition noted in the Main Message above, vehicles will not meet the requirements of Federal Motor Vehicle Safety Standards (FMVSS) No. 138 Tire Pressure Monitoring System. Operation of tires at low inflation pressures can contribute to separation of the tire tread. If the tread separates from the tire, the driver can lose control of the vehicle, possibly resulting in a crash. | ||
Q3 | Can you tell me more about what is wrong with the vehicles? | ||
A | The TPMS warning light illuminates at a lower than specified pressure due to the incorrect tire pressures being recorded in the instrument cluster system. The pressures stored in the instrument cluster are used by the TPMS as the reference pressures. | ||
Q4 | How would the customer become aware of potentially having this concern? | ||
A | Customers may notices a degradation of ride comfort where tires are not inflated to the correct pressures. | ||
Q5 | Does this concern affect vehicle safety? | ||
A | Jaguar Land Rover is conducting this as this as a safety recall. | ||
Q6 | Has Jaguar Land Rover Limited received many complaints? | ||
A | Jaguar Land Rover has received a small number of retailer/authorized repairer reports relating to this matter. | ||
Q7 | Have there been any accidents or injuries? | ||
A | Jaguar Land Rover is not aware of any accidents or injuries which have been attributed to this issue. | ||
Q8 | How was the condition discovered? | ||
A | The condition was highlighted through retailer/authorized repairer field reports. | ||
Q9 | How long has Jaguar Land Rover known about this problem? | ||
A | This issue started to be investigated in December 2017. | ||
Q10 | Is the defect leading you to any concerns regarding the reliability of a system, which is supposed to be designed and engineered for the passengers’ safety? What type of measures are you planning to take? | ||
A | We have no concerns with the overall reliability of the vehicle. Jaguar Land Rover carefully monitors field data to ensure that any matters relating to safety and compliance are rigorously investigated. | ||
Q11 | What has Jaguar Land Rover done in production? | ||
A | The correct tire pressure information is now recorded in the IC. | ||
Q12 | What will authorized Land Rover retailers do to the vehicles? | ||
A | Authorized Land Rover retailers will update the IC information with the correct tire pressures. | ||
Q13 | Which vehicles are affected by this recall? | ||
A | The following Land Rover Range Rover Evoque vehicles manufactured from June 13, 2017, to December 11, 2017, are affected:
|
||
Q14 | Are other Jaguar Land Rover models affected by these actions? | ||
A | No other models, other than those listed on this document, are known to be affected by this condition. | ||
Q15 | Are parts available to rework vehicles? | ||
A | Yes, the necessary software is available for authorized Land Rover retailers to conduct this repair. | ||
Q16 | How much will the recall cost Jaguar Land Rover? | ||
A | Cost was not a factor in deciding to recall these vehicles. | ||
Q17 | How do I know if my vehicle is affected? | ||
A | All owners of potentially affected vehicles will shortly receive a letter inviting them to contact an authorized Land Rover retailer for the work to be carried out. | ||
Q18 | How long does it take for the vehicle to be inspected and repaired? | ||
A | The work will be carried out as quickly and efficiently as possible in order to minimize inconvenience to customers and is expected to take no longer than 15 minutes. Due to retailer schedules, vehicles may be required for longer. | ||
Q19 | Can I continue to drive my vehicle safely until it has been recalled? | ||
A | Customers are advised to contact an authorized Land Rover retailer should they have any concerns regarding their vehicles. |
N164NAS1
TECHNICAL BULLETIN
21 FEB 2018
© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge, tools, and equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on some vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by ‘do-it-yourselfers’. If you are not a Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Land Rover service facility to determine whether this bulletin applies to a specific vehicle.
INFORMATION
SECTION:
100-01: Identification Codes
SUBJECT/CONCERN:
SAFETY RECALL: Tire Pressure Monitoring System (TPMS) Incorrect For 20-Inch Tires In Instrument Cluster (IC)
AFFECTED VEHICLE RANGE:
MODEL: | MODEL YEAR: | VIN: | ASSEMBLY PLANT: | APPLICABILITY: |
---|---|---|---|---|
Range Rover Evoque (LV) | 2018 | 256731-295452 | Halewood | Folding Top |
MARKETS:
CONDITION SUMMARY:
SITUATION:
An issue has been identified on a limited number of vehicles, fitted with 20-inch wheels, within the listed Affected Vehicle Range where the Tire Pressure Monitoring System (TPMS) pressure has been set incorrectly in the instrument cluster. The set instrument cluster stored pressures are employed by the TPMS system to determine pressure thresholds against which TPMS warning system activation should occur. The TPMS will not illuminate the warning telltale at the correct pressure when the tire pressure is 25% below the manufacturer’s recommended cold inflation pressure as stated on the Tire Placard. The TPMS system set pressure on the instrument cluster does not correspond with the correct information on the Tire Placard. The pressures stated on the Tire Placard are correct.
Operation of tires at low inflation pressures can contribute to separation of the tire tread. If the tread separates from the tire, the driver can lose control of the vehicle, possibly resulting in a crash.
ACTION:
Retailers are required to HOLD affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale pending completion of the Diagnostic and Workshop Procedures detailed in this Technical Bulletin. Unsold vehicles should have this performed as part of the Pre-Delivery Inspection (PDI) process but must have it completed prior to vehicle handover to the customer.
Affected vehicles already in the hands of customers should be updated at the next available opportunity.
PARTS:
No parts required.
SPECIAL TOOLS:
Jaguar Land Rover-approved Midtronics Battery Power Supply
Jaguar Land Rover-approved diagnostic tool with latest PATHFINDER software
WARRANTY:
NOTE: |
Check DDW to make sure that a vehicle is affected by this program prior to undertaking any rework action. |
At the time of confirming a booking for vehicle repair, make sure that all outstanding Recall and Service Actions are identified to ensure the correct parts are available and adequate workshop time is allocated for repairs to be completed at one visit.
Warranty claims must be submitted quoting the Program Code and the relevant Option Code; this will result in payment of the stated time. The SRO and parts information is included for information only. The Option Code(s) that allows for the drive in/drive out allowance may only be claimed if the vehicle is brought back into the workshop for this action alone to be undertaken.
Repair procedures are under constant review and therefore times / prices are subject to change; those quoted here must be taken as guidance only. Refer to TOPIx to obtain the latest repair time.
Warranty claims must be submitted or payment within 30 calendar days of completion of the repair.
PROGRAM CODE | OPTION CODE | DESCRIPTION | SRO | TIME (HOURS) | PARTS/SUNDRY CODE | QTY./VALUE |
---|---|---|---|---|---|---|
N164 | A | Tire Pressure Monitor Module – Update | 86.91.48 | 0.20 | – | – |
N164 | B | Tire Pressure Monitor Module – Update Drive in/drive out | 86.91.48
02.02.02 |
0.20
0.20 |
–
– |
–
– |
Normal Warranty policies and procedures apply.
DIAGNOSTIC PROCEDURE: PATHFINDER
This Diagnostic Procedure is only for vehicles requiring the Jaguar Land Rover-approved diagnostic tool with PATHFINDER.
CAUTIONS: |
|
1
Connect the Jaguar Land Rover-approved Midtronics battery power supply to the vehicle startup battery.
2
NOTE: |
The Jaguar Land Rover-approved diagnostic tool must be loaded with PATHFINDER version 140 (or later). |
Connect the Jaguar Land Rover-approved diagnostic tool to the vehicle and begin a new session.
3
NOTE: |
The Jaguar Land Rover-approved diagnostic tool will read the correct Vehicle Identification Number (VIN) for the current vehicle and automatically take the vehicle out of Transit mode if required. |
Follow the on-screen prompts.
4
Select ECU Diagnostics.
5
Select Tire Pressure Monitor Module [TPM].
6
- Follow all on-screen instructions until the application completes successfully.
- When all tasks are complete, go to the next Step.
7
Exit the current session.
- If required, reset the vehicle to Transit mode.
- Select the Exit icon.
8
Disconnect the diagnostic tool and battery power supply from the vehicle.
9
Go to the Workshop Procedure below.
WORKSHOP PROCEDURE:
Check that the tire pressure information displayed on the Instrument Cluster (IC) corresponds to the tire pressures listed on the tire data label (see TOPIx Workshop Manual section 100-01: Identification Codes – Description and operation – Identification codes).
- If the tire pressure information displayed on the IC does correspond to the tire pressures on the tire data label, release the vehicle.
- If the tire pressure information displayed on the IC does not correspond to the tire pressures on the tire data label, submit an Electronic Product Quality Report (EPQR).
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
LAND ROVER | RANGE ROVER EVOQUE | 2018 |
11 Associated Documents
Manufacturer Notices(to Dealers,etc)- 21-FEB-18 – SAFETY RECALL N164 (NHTSA 18V-088): TIRE PRESSURE MONITORING SYSTEM (TPMS)INCORRECT FOR 20-INCH TIRES IN INSTRUMENT CLUSTER (IC)
RCMN-18V088-5525.pdf 102.756KB
ISSUED Owner Notification Letter(Part 577)
RCONL-18V088-1775.pdf 273.803KB
Recall Acknowledgement
RCAK-18V088-1605.pdf 245.838KB
Manufacturer Notices(to Dealers,etc)- 15-FEB-18 – NOTIFICATION OF SAFETY RECALL N164 (NHTSA 18V-088)
Recall 573 Report- AMENDMENT 1
RCLRPT-18V088-1072.PDF 215.868KB
Non-Compliance Notice 573 Report/FMVSS 138
RCLRPT-18V088-2523.pdf 216.275KB
Remedy Instructions and TSB
RCRIT-18V088-1189.pdf 205.946KB
Recall Quarterly Report #2, 2018-2
RCLQRT-18V088-7182.PDF 214.618KB
Recall Quarterly Report #1, 2018-1
RCLQRT-18V088-9036.PDF 214.517KB
Recall Quarterly Report #3, 2018-3
RCLQRT-18V088-4945.PDF 211.324KB
Recall Quarterly Report #4, 2018-4
RCLQRT-18V088-9208.PDF 211.436KB
Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18V088&docType=RCL
Reprogramming
JLR Symptom Driven Diagnostics (SDD) for Independent Repairers: Diagnostic Software / Module programming subscriptions - without security access - can be purchased via TOPIx (From the User ID - Options Menu – Programming subscriptions – click add). Module programming - with security access - is necessary to program the IPC, BCM, ECM (PCM), KVM, as well as keys. Licensed locksmiths and independent repairers must be active members of the National Automotive Service Task Force (NASTF) Vehicle Security Professional (VSP) registry and will need to purchase a subscription to Independent Module Programming with Security Access to program these components. Currently we are only able to support yearly module programming subscriptions with security access. SDD will only support Jaguar vehicles built from 1995 MY onward.
- ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
- J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Pass‑thru
- TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news – Giving you the confidence and up-to-date knowledge to get the job done
- J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
- FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
- 【As a multi-protocol Pass-Thru vehicle interface】MaxiFlash Elite is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device. Specially designed to provide users with convenient PC communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, MaxiFlash Elite offers the most significant features desired by OEM customers: reliability, fast performance and flexibility.
- 【MaxiFlash Elite is an accessory tool for MK908P, MS908S Pro】Autel MaxiSys Elite to program ECUs on specific for BMW and for Benz vehicles, in case you lost the J-2534 programmer. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your tablet MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. The functions are NOT universally compatible. Please send VIN number to 🚘jmxd2022@outlook.com📧🚘 to check compatibility before your order. If need any supports, Please contact us.
- 【Wireless with advanced networking functions】Built-In Wireless with advanced networking functions and data storage. Fast performance ensures reprogramming even the newest controllers & Internet upgradable and updatable. Autel MaxiFlash Elite is compatiable with MaxiSYS MS908S, MaxiSYS MS908S Pro , MaxiSYS MS908CV, MaxiCOM MK908, MaxiCOM MK908 Pro, MaxiSYS Elite, MaxiSYS Elite II and Personal Computer
- 【SAE J2534-1 & J2534-2 Standards】Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
- 【Supports simultaneous communication Definition in J2534-1】Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed.Rugged aluminum case with non-slip rubber end caps, capable of withstanding harsh environment.
- 🔥【The King of Cost-Effectiveness From Autel】Fully upgraded from Autel MaxiSys EliteII /MS908S Pro/MK908P, Autel Scanner launched 2023 Newest 🅰🆄🆃🅴🅻 MaxiSys Elite II pro. 👉2 Years Free Update, ECU Programming&Coding, 38+ Service, Bidirectional Control, etc. Auto scanning 2.0 with all hardware parameters upgrade, provide total 8 (5+3)x diagnostic speed ✅CAN FD/ DOIP protocols support GM MY2020+ models, BMW E/F/G, Jaguar, Land Rover makes (Elite II can’t).
- 🔥【OE-LEVEL J2534 ECU PROGRAMMING & CODING】Enhance your diagnostics with the Elite II Pro J2534 Reprogramming scanner. This cutting-edge auto scanner supports : 1) program the new adaptive data to the on-board modules 2) replace the existing software/firmware in the ECUs 3) match the component control modules after repair or replacement 4) flash the hidden functions and 5) enhance the vehicle features. Experience 5X faster communication with SAE J2534-1 & -2 compliant programming interface.
- 🔥【38+ Maintenance Functions & High-End Functions】Autel scan tool Elite II Pro shares the same functional and deep service functions with other high-end scanners such as MaxiSys MS909/MS919/Ultra. 38+ special functions such as EPB/SAS/BMS/Oil/ABS/TPMS/Throttle/Injector/Suspension, etc., fix almost all “check engine” light issues. Bi-directional control, guided function, component matching, and scan VIN/license, together offer you effective and convenient diagnostic experiences.
- 🥇【DOIP& CAN FD Protocol, Top Hardware 5X Lightning Speed】Exclusive J2534 brings same DoIP & CAN FD protocol as Ultra/ MS919: CAN FD for GM MY2020+ Models; DOIP for BMW E/F/G Chassis, Jaguar, Land Rover makes. The improved hardware makes ELITE II PRO run more smoothly, even faster than MS919. It’s build with 8-Core CPU, Android 10.0 OS, 9.7’’ 1536*2048 touchscreen, 4GB&128GB, 11,000mAh battery, 2.4&5GHz dual-band WIFI, surpass Elite II/ Elite/ MS908S Pro II/ MK908 Pro II.
- 🔥【Free MV108 Assist Repairs】The MV108 digital inspection camera is designed to work with the MaxiSys series and PC, turning your MaxiSys scanner into a video inspection scope, allowing you to examine difficult-to-reach areas normally hidden from sight. It is capable of recording digital still images and videos, which offers you an economical solution to inspect machinery, facilities, and infrastructure quickly. One programmer tool Elite II Pro and one Videoscope MV108 make a perfect match.
- 🌐【Works with Autel MK908, MS908(S/Pro), MK908P, MaxiSys Elite】Autel J2534 work with these tools to program ECUs on specific BMW/ BENZ for specific functions. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your scanner MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, contact us via: 🚘auteldirect @ outlook. com🚘.
- 🌐【SAE J2534-1 & J2534-2 Standards】Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
- 🌐【High-speed Transmission Speed】Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed to save more times and win more business.
- 🌐【Multiple Devices Connected with PC】Autel MaxiFlash Elite J2534 also supports multiple device connections to the PC, which can operate diagnostic and reprogramming functions on more than one vehicle at the same time. Autel MaxiFlash Elite J2534 built-in wireless and data storage, which can update via Internet. It also ensures quickly reprogramming even the newest controllers.
- 🌐【Extensive Compatibility】Autel MaxiFlash J2534 is compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. To check compatibility, please contact 🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
- Industry-leading J2534 Pass-Thru Technology: Enabling diagnostics, reprogramming and security functions for dealerships and the independent repair facility. Economical and compact pass-thru devices provides an easy-to-use interface that allows you to repair complex vehicles with OE applications in your shop. Each type (see single branded types above) Mongoose-Plus is engineered to work with one of the following OEM's J2534 applications for Chrysler, Ford, GM, Nissan, Toyota, & VW/Audi.
- Supports Current & Earlier Vehicles: Enables diagnostics, programming and other “dealer” functions through OEM applications
- NEW Bluetooth Wireless Options Available: Providing wireless connectivity between your laptop and the Mongoose-Plus
- Expert Product Support: Staffed by technicians who understand vehicle repair and J2534 Pass‑Thru applications to help you with any technical setup questions
- Key Registration and Immobilizer Support: Using NASTF Vehicle Security Professional credentials
- Stay up-to-date with thelatest firmware and support of the SM2Pro J2534VCI ECUs programmer, ensuring reliable perform and optimalresults.
- The SM2Pro J2534VCI ECUs programmer is a trustedtool for professional technicians, offering comprehensive functionality and easy integration into your workflows.
- The SM2Pro J2534VCI ECUs programmer offersadvanced functionality for efficient and precise ECUs programming.
- With its 67IN1 without dongle & OBDcompatibility, the SM2Pro J2534VCI ECUs programmer provides a versatilesolution for read and write operations.
- Experienceseamless ECUs programming with the SM2Pro J2534VCI, designed to streamlines the read and write processes for enhanced efficiency.
Last update on 2024-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.