SAFETY RECALL H090 (NHTSA 18V112): RESTRAINTS CONTROL MODULE (RCM) CALIBRATION INCORRECT – 2018 Jaguar XF Sportbrake

“This site contains affiliate links for which OEMDTC may be compensated”

 

February 15, 2018

Frontal Air Bags may not Deploy Properly

In the event of a crash, the driver and the front seat passenger may not be properly protected by the frontal air bags, increasing their risk of injury.

 

NHTSA Campaign Number: 18V112

Manufacturer Jaguar Land Rover North America, LLC

Components AIR BAGS

Potential Number of Units Affected 307

 

Summary

Jaguar Land Rover North America, LLC (Jaguar) is recalling certain 2018 XF Sportbrake vehicles. The Supplemental Restraint System (SRS) calibration may be incorrect, possibly causing the frontal air bags to deploy improperly in a low speed crash.

 

Remedy

Jaguar will notify owners, and dealers will update the software for the air bag system, free of charge. The recall is expected to begin April 6, 2018. Owners may contact Jaguar customer service at 1-800-452-4827. Jaguar’s number for this recall is H090.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if your Jaguar has a Recall

 


SAFETY RECALL H090 (NHTSA 18V112):
RESTRAINTS CONTROL MODULE (RCM)
CALIBRATION INCORRECT
SERVICE BULLETIN

 

08-MAR-18 NO.: 7-144USA SEC.: RECALL MKT.: USA

 

Jaguar Land Rover North America, LLC has informed the National Highway Traffic Safety Administration (NHTSA) of its intent to perform a voluntary Safety Recall on certain 2018 model year Jaguar XF Sportbrake vehicles imported into the United States market. Information relating to this Recall will be posted on the National Highway Traffic Safety Administration website.

United States Federal regulations require that retailers must be notified within a reasonable time after the manufacturer decides that a defect that relates to motor vehicle safety or a noncompliance exists.

United States Federal law requires retailers to complete any outstanding safety Recall service before a new vehicle is delivered to the buyer or lessee. Violation of this requirement by a retailer could result in a civil penalty of up to $21,000.00 per vehicle.

This Recall Service Bulletin serves as notification to all Jaguar retailers in the United States and Federalized Territories that any affected new vehicles may not be sold and delivered for customer use until the Recall repair is completed.

 

THIS BULLETIN UPDATES 7-143USA

 

DESCRIPTION OF ISSUE

An issue has been identified on a limited number of Jaguar vehicles within the listed Affected Vehicle Range with the calibration of the Supplementary Restraint System (SRS). The calibration of the Restraints Control Module (RCM) does not provide the correct airbag deployment signals in the event of a crash.

 

AFFECTED VEHICLE RANGE

XF (X260; Sportbrake)
Model Year:  ………………. 2018
VIN:  …………………………….. SAJBM2FV9JCY56880-SAJBP2FV6JCY67245

A total of 307 vehicles are affected in the USA and Federalized Territories. Visit the Jaguar Business Network (JBN) website for a list of affected unsold vehicles (as of 01 March 2018).

 

EFFECT ON VEHICLE OPERATION

Vehicles may not meet some of the frontal airbag protection requirements in certain low speed impact scenarios. In the event of a vehicle crash, the Supplementary Restraint System may not provide the level of protection required to the driver and front passenger seat occupant, leading to an increased risk of injury.

 

SERVICE PROGRAM / REWORK ACTION

Owners will be notified and instructed to take their vehicle to an authorized Jaguar retailer who will download the correct software to the vehicle.

There will be no charge to owners for this action under this program.

 

OWNER NOTIFICATION

Owners will receive a notification by mail on or before 06 April 2018.

 

ACTION TO BE TAKEN

Use the Jaguar Land Rover claims submission system to ensure that the vehicle is affected by Program Code ‘H090’ prior to undertaking any rework action.

Retailers are required to HOLD affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale pending completion of the rework action. Sold vehicles will be subject to the standard Recall notification and Recall bulletin process detailing the action required for vehicles in the hands of owners.

Jaguar Land Rover North America recommends that affected sales demonstrator and loaner vehicles are repaired before use and that used vehicles are repaired before sale. Retailers who choose to proceed against this recommendation, where legally permitted, must clearly and conspicuously disclose the open recall to the applicable customers.

Refer to Technical Bulletin H090NAS, SAFETY RECALL: Restraints Control Module (RCM) Calibration Incorrect, for detailed repair instructions.

 

PARTS

No parts required.

 

TOOLS

Refer to the Technical Bulletin referenced above for any required special tools.

 

WARRANTY

NOTE: use the Jaguar Land Rover claims submission system to ensure that a vehicle is affected by this program prior to undertaking any rework action.

At the time of confirming a booking for vehicle repair, ensure that all outstanding Recall and Service Actions are identified to ensure the correct parts are available and adequate workshop time is allocated for repairs to be completed in one visit.

Warranty claims must be submitted quoting the Program Code together with the relevant Option Code. The SRO and parts information listed have been included for information only. The Option Code(s) that allows for the drive in/drive out allowance may only be claimed if the vehicle is brought into the workshop for this action alone to be undertaken.

Warranty claims must be submitted for payment within 30 calendar days of completion of the repair.

PROGRAM CODE OPTION CODE DESCRIPTION SRO TIME (HOURS) PARTS / SUNDRY CODE* QTY. / VALUE*
H090 B Configure Restraints Control Module (RCM) 86.95.02 0.2
H090 C Configure Restraints Control Module

(RCM)

Drive In/Drive Out

86.95.02

 

10.10.10

0.2

 

0.2

 

 

Normal Warranty policies and procedures apply.


TECHNICAL Q & A: SAFETY RECALL H090


Main Message: An issue has been identified with the Supplementary Restraints System (SRS) calibrations on certain 2018MY Jaguar XF Sportbrake vehicles. The calibrations loaded do not provide the correct deployment signals in the event of a crash. Vehicles in this condition may not meet some of the front occupant protection requirements in certain low speed impact scenarios.

Q1 Who do I contact if a member of the press contacts me about this recall?
A Please ensure Press enquiries are referred to the Jaguar Land Rover North America Press Office to the attention of:.

Stuart Schorr
Vice President, Communications & Public Affairs
Jaguar Land Rover North America, LLC
sschorr@jaguarlandrover.com
Office: +1-201-760-8561
Cell: +1-201-739-2964
Nathan Hoyt
Product Communications Manager
Jaguar Land Rover North America, LLC
nhoyt@jaguarlandrover.com
Office: +1-201-818-8316
Cell: +1-551-427-3199

 

Q2 Why is Jaguar Land Rover recalling certain Jaguar vehicles?
A These vehicles are being recalled because this defect, incorrect SRS calibration, may increase the risk of front seat occupant injury in certain low speed crash events.
Q3 Can you tell me more about what is wrong with the vehicles?
A Vehicles have been released for sale where the SRS calibration is incorrect. Although at higher speeds, the SRS system will perform as required, where a lower speed crash occurs, the SRS system may not deploy one or both of the frontal airbags when a deployment is warranted or the time to fire is delayed excessively.
Q4 How would the customer become aware of potentially having this concern?
A There is no advanced warning of this condition.
Q5 Does this concern affect vehicle safety?
A Jaguar Land Rover is conducting this as a Safety Recall.
Q6 Has Jaguar Land Rover Limited received many complaints?
A There have been no complaints related to this issue of which Jaguar Land Rover is aware.
Q7 Have there been any accidents or injuries?
A Jaguar Land Rover is not aware of any accidents or injuries which have been attributed to this issue.
Q8 How was the condition discovered?
A The condition was highlighted through internal Engineering reviews.
Q9 How long has Jaguar Land Rover known about this problem?
A This issue started to be investigated in January 2018.
Q10 Is the defect leading you to any concerns regarding the reliability of a system, which is supposed to be designed and engineered for the passengers’ safety? What type of measures are you planning to take?
A We have no concerns with the overall reliability of the vehicle. Jaguar Land Rover carefully monitors field data to ensure that any matters relating to safety and compliance are rigorously investigated.
Q11 What has Jaguar Land Rover done in production?
A The correct, as intended SRS software with correct calibrations is now being uploaded to vehicles during the manufacturing process.
Q12 What will an authorized Jaguar retailers do to the vehicles?
A Authorized Jaguar retailers will update the Restraint Control Module software to the correct specification for your vehicle.
Q13 Which vehicles are affected by this recall?
A The following Jaguar vehicles are affected:

2018MY XF Sportbrake (SAJBM2FV9JCY56880-SAJBP2FV6JCY67245) manufactured between  13 October 2017 and 14 December 2017.

Q14 Are other Jaguar Land Rover models affected by these actions?
A No other models, other than those listed on this document, are known to be affected by this condition.
Q15 Are parts/software available to rework vehicles?
A Yes, the necessary software is available for authorized Jaguar retailers to conduct this repair.
Q16 How much will the recall cost Jaguar Land Rover?
A Cost was not a factor in deciding to recall these vehicles.
Q17 How do I know if my Jaguar vehicle is affected?
A All owners of potentially affected vehicles will shortly receive a letter inviting them to contact an authorized Jaguar retailer for the work to be carried out.
Q18 How long does it take for the vehicle to be inspected and repaired?
A The work will be carried out as quickly and efficiently as possible in order to minimize inconvenience to customers and is expected to take no longer than 30 minutes. Due to retailer schedules, vehicles may be required for longer.
Q19 Can I continue to drive my Jaguar vehicle safely until it has been recalled?
A Customers are advised to contact an authorized Jaguar retailer if they have any concerns regarding their vehicles.

 


H090NAS1

TECHNICAL BULLETIN

08 MAR 2018

 

© Jaguar Land Rover North America, LLC

NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge, tools, and equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on some vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by ‘do-it-yourselfers’. If you are not a Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Jaguar service facility to determine whether this bulletin applies to a specific vehicle.

 

INFORMATION

SECTION:

501-20B: Supplementary Restraint System

 

SUBJECT/CONCERN:

SAFETY RECALL: Restraints Control Module (RCM) Calibration Incorrect

 

AFFECTED VEHICLE RANGE:

MODEL: MODEL YEAR: VIN: ASSEMBLY PLANT: APPLICABILITY:
XF (X260) 2018 Y56880-Y67245 Castle Bromwich Sportbrake

 

MARKETS:

USA

 

CONDITION SUMMARY:

SITUATION:

An issue has been identified on certain vehicles within the listed Affected Vehicle Range with the calibration of the Supplementary Restraint System (SRS). The calibration of the Restraints Control Module (RCM) does not provide the correct deployment signals in the event of a crash.

Vehicles may not meet some of the frontal airbag protection requirements in certain low speed impact scenarios. In the event of a vehicle crash, the Supplementary Restraint System may not provide the level of protection required to the driver and front passenger seat occupant, leading to an increased risk of injury.

 

ACTION:

Retailers are required to HOLD affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale pending completion of the Diagnostic Procedure detailed in this Technical Bulletin. Unsold vehicles should have this performed as part of the Pre-Delivery Inspection (PDI) process but must have it completed prior to vehicle handover to the customer.

Affected vehicles already in the hands of customers should be updated at the next available opportunity.

 

PARTS:

No parts required.

 

SPECIAL TOOLS:

Jaguar Land Rover-approved Midtronics Battery Power Supply

Jaguar Land Rover-approved diagnostic tool with latest PATHFINDER software

 

WARRANTY:

NOTE:
Use the Jaguar Land Rover claims submission system to make sure that a vehicle is affected by this program prior to undertaking any rework action.

 

At the time of confirming a booking for vehicle repair, make sure that all outstanding Recall and Service Actions are identified to ensure the correct parts are available and adequate workshop time is allocated for repairs to be completed at one visit.

Warranty claims must be submitted quoting the Program Code and the relevant Option Code; this will result in payment of the stated time. The SRO and parts information is included for information only. The Option Code(s) that allows for the drive in/drive out allowance may only be claimed if the vehicle is brought back into the workshop for this action alone to be undertaken.

Repair procedures are under constant review and therefore times / prices are subject to change; those quoted here must be taken as guidance only. Use the Jaguar Land Rover claims submission system to obtain the latest repair time.

Warranty claims must be submitted or payment within 30 calendar days of completion of the repair.

PROGRAM CODE OPTION CODE DESCRIPTION SRO TIME (HOURS) PARTS/ SUNDRY CODE QTY./ VALUE
H090 B Configure Restraints Control Module (RCM) 86.95.02 0.2
H090 C Configure Restraints

Control Module (RCM)

Drive In/Drive Out

86.95.02

10.10.10

0.2 0.2

 

Normal Warranty policies and procedures apply.

 

DIAGNOSTIC PROCEDURE:

This Diagnostic Procedure is only for vehicles requiring the Jaguar Land Rover-approved diagnostic tool with PATHFINDER.

CAUTIONS:
  • All ignition ON/OFF requests must be carried out; failure to perform these steps may cause damage to control modules in the vehicle.

 

1

Connect the Jaguar Land Rover-approved Midtronics battery power supply to the vehicle startup battery.

 

2

NOTE:
The Jaguar Land Rover-approved diagnostic tool must be loaded with PATHFINDER version 144 (or later).

 

Connect the Jaguar Land Rover-approved diagnostic tool to the vehicle and begin a new session.

 

3

NOTE:
The Jaguar Land Rover-approved diagnostic tool will read the correct Vehicle Identification Number (VIN) for the current vehicle and automatically take the vehicle out of Transit mode if required.

 

Follow the on-screen prompts.

 

4

Select ECU Diagnostics.

 

5

Select Restraints Control Module [RCM].

 

6

Select Update ECU.

  1. Follow all on-screen instructions until the application completes successfully.
  2. When all tasks are complete, go to the next Step.

 

7

Exit the current session.

  1. If required, reset the vehicle to Transit mode.
  2. Select the Exit icon.

 

8

Disconnect the diagnostic tool and battery power supply from the vehicle.


1 Affected Product

Vehicle

MAKE MODEL YEAR
JAGUAR XF 2018

 


11 Associated Documents

Manufacturer Notices(to Dealers,etc)- 01-MAR-18 – NOTIFICATION OF SAFETY RECALL H090 (NHTSA 18V112)

RCMN-18V112-4646.pdf 59.671KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [58.27 KB]

 


Remedy Instructions and TSB

RCRIT-18V112-6954.pdf 99.565KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [97.23 KB]

 


Miscellaneous Document

RMISC-18V112-8731.pdf 78.929KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [77.08 KB]

 


Manufacturer Notices(to Dealers,etc)- 08-MAR-18 – SAFETY RECALL H090 (NHTSA 18V112): RESTRAINTS CONTROL MODULE (RCM)CALIBRATION INCORRECT

RCMN-18V112-0611.pdf 526.768KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [514.42 KB]

 


Miscellaneous Document – TECHNICAL ENGINEERING SERVICES – 18MY XF SPORTBRAKE SAFETY RECALL H090 – SUPPLEMENTARY RESTRAINTS SYSTEM CALIBRATION

RMISC-18V112-5320.pdf 51.795KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [50.58 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-18V112-1391.pdf 785.167KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [766.76 KB]

 


Recall Acknowledgement

RCAK-18V112-7784.pdf 245.769KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [240.01 KB]

 


Recall 573 Report

RCLRPT-18V112-9230.PDF 215.735KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.68 KB]

 


Recall Quarterly Report #1, 2018-1

RCLQRT-18V112-9981.PDF 214.524KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.50 KB]

 


Recall Quarterly Report #2, 2018-2

RCLQRT-18V112-4121.PDF 211.32KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.37 KB]

 


Recall Quarterly Report #3, 2018-3

RCLQRT-18V112-6513.PDF 211.32KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.37 KB]

 


Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18V112&docType=RCL


 

Reprogramming

JLR Symptom Driven Diagnostics (SDD) for Independent Repairers: Diagnostic Software / Module programming subscriptions - without security access - can be purchased via TOPIx (From the User ID - Options Menu – Programming subscriptions – click add). Module programming - with security access - is necessary to program the IPC, BCM, ECM (PCM), KVM, as well as keys. Licensed locksmiths and independent repairers must be active members of the National Automotive Service Task Force (NASTF) Vehicle Security Professional (VSP) registry and will need to purchase a subscription to Independent Module Programming with Security Access to program these components. Currently we are only able to support yearly module programming subscriptions with security access. SDD will only support Jaguar vehicles built from 1995 MY onward.

 

J2534 Device

SAFETY RECALL H090 (NHTSA 18V112): RESTRAINTS CONTROL MODULE (RCM) CALIBRATION INCORRECT - 2018 Jaguar XF Sportbrake | small light CarDAQ-Plus 3 All Makes J2534 Reprogramming Tool
SAFETY RECALL H090 (NHTSA 18V112): RESTRAINTS CONTROL MODULE (RCM) CALIBRATION INCORRECT - 2018 Jaguar XF Sportbrake | small light Drew Technologies (DRWCDPLUSKIT) CarDAQ-Plus J2534 Flash Reprogramming Kit
SAFETY RECALL H090 (NHTSA 18V112): RESTRAINTS CONTROL MODULE (RCM) CALIBRATION INCORRECT - 2018 Jaguar XF Sportbrake | small light Drew Tech Mongoose Pro ISO-CAN
SAFETY RECALL H090 (NHTSA 18V112): RESTRAINTS CONTROL MODULE (RCM) CALIBRATION INCORRECT - 2018 Jaguar XF Sportbrake | small light VSI J2534 ECU Reprogrammer & Diagnostic Adapter
SAFETY RECALL H090 (NHTSA 18V112): RESTRAINTS CONTROL MODULE (RCM) CALIBRATION INCORRECT - 2018 Jaguar XF Sportbrake | small light BOSCH Automotive Tools MTECH2 Mastertech II J2534 VCI
SAFETY RECALL H090 (NHTSA 18V112): RESTRAINTS CONTROL MODULE (RCM) CALIBRATION INCORRECT - 2018 Jaguar XF Sportbrake | small light Autel MaxiFlash VCI Vehicle Communication Interface J2534 PassThru ECU Programming Device Bluetooth Connection Internet Update Support CAN FD, 4 CAN Channels, DoIP, D-PDU Works with PC or Autel MS909
SAFETY RECALL H090 (NHTSA 18V112): RESTRAINTS CONTROL MODULE (RCM) CALIBRATION INCORRECT - 2018 Jaguar XF Sportbrake | small light VXDIAG VCX Nano Compatible for GM/OPEL with GDS2 and Tech2WIN System Diagnostic Tool
SAFETY RECALL H090 (NHTSA 18V112): RESTRAINTS CONTROL MODULE (RCM) CALIBRATION INCORRECT - 2018 Jaguar XF Sportbrake | small light GODIAG J2534

 

SDD Manual Software Download

Jaguar Techinfo

Land Rover Techinfo

 


 

Bestseller No. 1
CarDAQ-Plus 3 All Makes J2534 Reprogramming Tool
  • ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
  • J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Pass‑thru
  • TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news – Giving you the confidence and up-to-date knowledge to get the job done
  • J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
  • FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
Bestseller No. 2
VNCI J2534 for Nano Diagnostic Tools,Support J2534 for Automatic Switch Mode Fast Communication
  • Application:Support most all of J2534 compatible software, most all of for software, ECU reprogramming in J2534 mode with programming voltage, supply software for diagnosing J1979 compatible vehicles.
  • Material:VNCI (Vehicle network communication interface) is a device that works between diagnostic software and vehicle. It is compatible with J2534 Passthru and for .
  • Advantage:Support J2534 and for mode in one device, and has automatic switch mode, more speedup, faster communication and reprogramming.VNCI J2534 for Nano protocol configuration include, for ISO15765, for ISO9141, for ISO14230, for J1850 PWM( supports IFR and 2X speed modes), for J1850 VPW (supports 4x speed mode).
  • Easy to install:More stability, never let you down while reprogramming, portable and convenient, small package and easy to carry.
  • Best Experience :We strive to provide you with the best quality products and the best customer experience.We try our best to meet your requirements.Please check the product information carefuly berore buying to aviod making mistakes.
Bestseller No. 3
LAUNCH X431 PRO5 Elite,J2534 Reprogramming Tool, Topology Mapping OBD2 Scanner Diagnostic Tool, CAN/CAFD/DoIP/HD/FCA SGW,Bidirectional Scan Tool, ECU Coding, 50+ Reset, All Systems Scanner
  • 🆚LAUNCH X431 PRO5 scan tool Upgrade all functions of X431 PRO3/X-431 Throttle III/X431-TorqueIII/X431 V+, PROS V+, PAD3. ⓵ J2534 ECU Programming &Online functions directly connect to OEM server, 50+ reset same as X-431 Throttle;⓶Bi-directional control and All system diagnostics as Snap-on scanner; ⓷ Support 150+ brands Vehicles (include CAN/CAFD/DoIP/HD protocols and AutoAuth for FCA SGW) ⓸Powered by 8-core processor(1.8GHz), Android9.0 OS, 2.4 & 5GHz WiFi connection.
  • 🚜[J2534 Reprogramming With FREE SMARTBOX 3.0】Save more than $2000, LAUNCH X431 PRO5 support J2534/DOIP/CANFD/HD protocols (Needn’t buy HDIII Module,Manufacture software and non-16pin adaptors need to be purchased separately.) Download OEM software from the manufacturer’s server to 1) program data to blank/used ECUs; 2) Reflash ECUs with data loss; 3)Upgrade ECU software version. As a wireless VCI allowing the vehicle to transmit data to the diagnostic tablet without a physical connection.
  • 👏[50+ Reset, Continuously Updated Reset Functions]: With the LAUNCH diagnostic tool, You will never be bothered by tricky vehicle issues and keep pace with newer technology. 50 commonly reset functions ( in the quick page ) reaching into the smallest parts to root out the problems. Extra 300+ repair functions ( in-vehicle catalog) for specific models extend the capability to reset, regeneration, initiation, matching, etc. (Functions vary by models, configurations, and systems.)
  • 🌐[One stop Intelligent Diagnostic Tool]: LAUNCH X431 PRO5 obd2 scanner Bluetooth provides Repair Tips, Repair Assist, Component Measurement, TSB, Relevant Cases DTC Analysis to simplify complex diagnostic and achieve the trouble-free repair. 🤩[One Scanner For Multiple Uses]: LAUNCH diagnostic tool PRO5 collaborates with add-on modules (ADAS, Videoscope, TSGUN, X-ProG3, WiFi Pinter, Battery Tester) to expand business applications and improve diagnostic accuracy.
  • 👍【2024 New OE Level Online Functions 】Bidirectional Scan Tool offers you various high-end online functions, which enable you to access the online data to do fast & complicated vehicle repairs, e.g. 1) ECU Coding for replacing, match, relearn, recode new ECU modules; 2) Online Coding for BMW, Audi, VW, Porsche, Benz to surf OEM data; 3) VAG Guided functions ease complex issues; 4) Personalization & ADAS improving car performance and driving safety.
Bestseller No. 4
Mongoose-Plus J2534 OEM Vehicle Interface Cable - GM OEM Reprogramming and Diagnostics
  • Industry-leading J2534 Pass-Thru Technology: Enabling diagnostics, reprogramming and security functions for dealerships and the independent repair facility. Economical and compact pass-thru devices provides an easy-to-use interface that allows you to repair complex vehicles with OE applications in your shop. Each type (see single branded types above) Mongoose-Plus is engineered to work with one of the following OEM's J2534 applications for Chrysler, Ford, GM, Nissan, Toyota, Subaru, & VW/Audi.
  • Supports Current GM Vehicles: Now includes CAN-FD, DoIP (Diagnostics over Internet Protocol - as defined in J2534-2) and support for J2534 version 5.0. This is the tool that GM dealerships use for diagnostics and reprogramming.
  • NEW Bluetooth Wireless Options Available: Providing wireless connectivity between your laptop and the Mongoose-Plus
  • Expert Product Support: Staffed by technicians who understand vehicle repair and J2534 Pass‑Thru applications to help you with any technical setup questions
  • Key Registration and Immobilizer Support: Using NASTF Vehicle Security Professional credentials
Bestseller No. 5
Autel MaxiFlash Elite VCI J2534 Pass-Thru ECU Programming Tool, Multi-Protocol PassThru Interface, Work with Autel MaxiSYS Elite II, Elite, MS908, MS908S Pro, MS908CV, MK908P, MK908 Pro II and PC
  • 🌐【Works with Autel MK908, MS908(S/Pro), MK908P, MaxiSys Elite】Autel J2534 work with these tools to program ECUs on specific BMW/ BENZ for specific functions. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your scanner MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, contact us via: 🚘auteldirect @ outlook. com🚘.
  • 🌐【SAE J2534-1 & J2534-2 Standards】Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
  • 🌐【High-speed Transmission Speed】Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed to save more times and win more business.
  • 🌐【Multiple Devices Connected with PC】Autel MaxiFlash Elite J2534 also supports multiple device connections to the PC, which can operate diagnostic and reprogramming functions on more than one vehicle at the same time. Autel MaxiFlash Elite J2534 built-in wireless and data storage, which can update via Internet. It also ensures quickly reprogramming even the newest controllers.
  • 🌐【Extensive Compatibility】Autel MaxiFlash J2534 is compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. To check compatibility, please contact 🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
Bestseller No. 6
VXDIAG VCX Nano GDS2 and Tech2Win Diagnostic Tool Compatible for GM/OPEL with Global Diagnostic Programming System GDS & GDS2 Blue
  • 🚗[Technical assistance] If you have any installation problems, download the installation manual. Or please contact us at any time. We can provide technical support and help you install software online
  • 🚗[Vehicle Coverage] Installation Tips: Please turn off anti-virus software before install. VXDIAG VCX NANO fully compatible with SAE-J2534-1 & SAE-J2534-2. All current and most legacy vehicle protocols: CAN, UART, KW2000, Class2, GM LAN, etc.
  • 🚗[Functional] ●USB vehicle-to-PC connectivity●Supports Windows,XP●CE and FCC compliance for hardware●Firmware Updatable. 【SPS】Service Programming System: ◎Passthrough programming on GM past model and Global A vehicles◎Increase reprogramming speed 20-70% and get ready to service new models.
  • 🚗[GDS] Global Diagnostic System: ◎New Diagnostic Application Software required for all GM Global Architecture (Global A) Vehicles. ◎GDS & GDS2 is software which runs on a specific PC. Updates received via TIS2Web.
  • 🚗[Efficient&Convenience] Quick access to vehicle data for maintenance or management reports.Quickly attaches to vehicle's diagnostic connector. Mixed fleet capabilities with broad protocol support.May be used with desktop PC or laptop. make sure your computer at least 4GB.Tech2win software only installed on 7 32bit computer and on physical system.Please download the latest vxmanager from vxdiag official website.

Last update on 2024-03-18 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...