“This site contains affiliate links for which OEMDTC may be compensated” |
January 17, 2019 NHTSA CAMPAIGN NUMBER: 19V040000
Crankshaft Pulley Bolt May Fracture
Engine failure can increase the risk of crash.
NHTSA Campaign Number: 19V040
Manufacturer Jaguar Land Rover North America, LLC
Components ENGINE
Potential Number of Units Affected 2,587
Summary
Jaguar Land Rover North America, LLC (Land Rover) is recalling certain 2019 Range Rover, Range Rover Sport, Range Rover Velar and Discovery vehicles. The affected vehicles are equipped with V6 or V8 engines whose crankshaft pulley retaining bolt may fracture possibly resulting in engine failure.
Remedy
Land Rover has notified owners, and dealers will replace the crankshaft pulley center retaining bolt, free of charge. The recall began February 12, 2019. Owners may contact Land Rover customer service at 1-800-637-6837. Land Rover’s number for this recall is N276.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Land Rover has a Recall
SAFETY RECALL N276: CENTER MAIN
CRANKSHAFT PULLEY BOLT
NAS19.01.018 | WORKSHOP | USA |
AFTERSALES BULLETIN
JANUARY 31, 2019
Jaguar Land Rover North America, LLC has informed the National Highway Traffic Safety Administration (NHTSA) of its intent to perform a voluntary Safety Recall on certain 2019 model year Land Rover Discovery, Range Rover Velar, Range Rover Sport, and Range Rover vehicles imported into the United States market. Information relating to this Recall will be posted on the National Highway Traffic Safety Administration website.
United States Federal regulations require that retailers must be notified within a reasonable time after the manufacturer decides that a defect that relates to motor vehicle safety or a noncompliance exists.
United States Federal law requires retailers to complete any outstanding safety Recall service before a new vehicle is delivered to the buyer or lessee. Violation of this requirement by a retailer could result in a civil penalty of up to $21,780.00 per vehicle.
This Recall Service Bulletin serves as notification to all Land Rover retailers in the United States and Federalized Territories that any affected new vehicles may not be sold and delivered for customer use until the Recall repair is completed.
THIS SAFETY RECALL SUPERSEDES UPS13118 WITH IMMEDIATE EFFECT
DESCRIPTION OF ISSUE
An issue has been identified on certain Land Rover vehicles within the listed Affected Vehicle Range where the center main crankshaft damper/pulley bolt may fracture. A batch of bolts has been manufactured away from specification and therefore has the potential to develop cracks on the surface of the bolt, leading to hydrogen embrittlement. These cracks cause the bolt to fracture over time, leading to a loss of retention of the crankshaft pulley. Where bolt fracture occurs, the pulley will oscillate for a period, but ultimately the crankshaft nose will break, leading to engine failure.
AFFECTED VEHICLE RANGE
Discovery (L462; V6 3.0L S/C Petrol)
Model Year: …………….. 2019
VIN: …………………………… SALRG2RV6K2400447-SALRG2RV7K2400585
Range Rover Velar (L560; V6 3.0L S/C Petrol)
Model Year: …………….. 2019
VIN: …………………………… SALYM2EV3KA200254-SALYL2FV0KA207616
……………………………………. SALYB2EV3KA798495-SALYL2EV6KA799721
Range Rover Sport (L494; V6 3.0L S/C Petrol; V8 5.0L S/C Petrol)
Model Year: …………….. 2019
VIN: …………………………… SALWV2SVXKA421049-SALWR2RVXKA421871
……………………………………. SALWR2RV1KA829398-SALWZ2SE8KA839338
Range Rover (L405; V6 3.0L S/C Petrol; V8 5.0L S/C Petrol)
Model Year: …………….. 2019
VIN: …………………………… SALGS2SV7KA531120-SALGS2RE7KA541393
A total of 2,587 vehicles are potentially affected in the USA and Federalized Territories. Visit the British Brands Sales Suite (BBSS) website for a list of affected vehicles at your retailer.
EFFECT ON VEHICLE OPERATION
Fracture of the crankshaft pulley bolt and associated breakage of the crankshaft nose will lead to the vehicle displaying a number of warning lights, quickly followed by loud noises, engine power loss, and the potential for engine failure. Further, the loose pulley could damage engine compartment components or puncture the hood and become a hazard to pedestrians or other road users.
Vehicles with a bolt from the affected batch may cut out while in motion with no ability to be restarted.
Engine cut-out with minimal warning poses an unreasonable risk to safety and may result in a crash.
SERVICE PROGRAM / REWORK ACTION
Owners will be notified and instructed to take their vehicle to an authorized Land Rover retailer who will replace the center main crankshaft damper/pulley bolt. There will be no charge to owners for this action under this program.
OWNER NOTIFICATION
Owners will receive a notification by mail on or before March 11, 2019.
ACTION TO BE TAKEN
Use the Jaguar Land Rover claims submission system to make sure that the vehicle is affected by this Program prior to undertaking any rework action.
Retailers are required to HOLD affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale pending completion of the rework action. Affected vehicles already in the hands of customers should be updated at the next available opportunity.
Jaguar Land Rover North America recommends that affected sales demonstrator and loaner vehicles are repaired before use and that used vehicles are repaired before sale. Retailers who choose to proceed against this recommendation, where legally permitted, must clearly and conspicuously disclose the open recall to the applicable customers.
Refer to Technical Bulletin N276NAS, SAFETY RECALL: Center Main Crankshaft Pulley Bolt, for detailed repair instructions.
PARTS
NOTE: only order the expected percentage demand of parts identified.
Use the Vehicle Identification Number (VIN) and the Electronic Parts Catalog (EPC) to confirm part number(s) necessary to perform repairs.
DESCRIPTION | PART NUMBER / SUNDRY CODE |
QUANTITY / VALUE |
EXPECTED PERCENTAGE DEMAND |
Bolt – Crankshaft pulley | LR011952 | 1 | 100 |
TOOLS
Refer to the Technical Bulletin referenced above for any required special tools.
WARRANTY
NOTE: use the Jaguar Land Rover claims submission system to make sure that a vehicle is eligible for this program prior to undertaking any rework action.
At the time of confirming a booking for vehicle repair, make sure that all outstanding Recall and Service Actions are identified to ensure the correct parts are available and adequate workshop time is allocated for repairs to be completed in one visit.
Warranty claims must be submitted quoting the Program Code together with the relevant Option Code. The SRO and parts information listed have been included for information only. The Option Code(s) that allows for the drive in/drive out allowance may only be claimed if the vehicle is brought into the workshop for this action alone to be undertaken.
Repair procedures are under constant review and therefore times / prices are subject to change; those quoted here must be taken as guidance only. Use TOPIx to obtain the latest repair time.
Warranty claims must be submitted for payment within 30 calendar days of completion of the repair.
PROGRAM CODE |
OPTION CODE |
DESCRIPTION | SRO | TIME (HOURS) |
PARTS / SUNDRY CODE |
QUANTITY / VALUE |
H181 | A | Discovery, Range Rover Sport, Range Rover
Crankshaft pulley bolt(s) – Renew |
12.21.89.01 |
0.9 |
LR011952 |
1 |
H181 | B | Discovery, Range Rover Sport,
Crankshaft pulley bolt(s) – Renew Drive In/drive out |
12.21.89.01 02.02.02 |
0.9 0.2 |
LR011952 – |
1 – |
H181 | C | Range Rover Velar
Crankshaft pulley bolt(s) – Renew |
12.21.89.01 |
1.5 |
LR011952 |
1 |
H181 | D | Range Rover Velar
Crankshaft pulley bolt(s) – Renew Drive In/drive out |
12.21.89.01 02.02.02 |
1.5 0.2 |
LR011952 – |
1 – |
Normal Warranty policies and procedures apply.
TECHNICAL Q & A: SAFETY RECALL N276
Main Message: The center main crankshaft damper/pulley bolt may fracture. A batch of bolts has been manufactured away from specification and therefore has the potential to develop cracks on the surface of the bolt leading to hydrogen embrittlement. These cracks cause the bolt to fracture over time, leading to a loss of retention of the crankshaft pulley. Where bolt fracture occurs, the pulley will oscillate for a period, but ultimately the crankshaft nose will break leading to engine failure.
Fracture of the crankshaft pulley bolt and associated breakage of the crankshaft nose will lead to the vehicle displaying a number of warning lights, quickly followed by loud noises, engine power loss, and the potential for engine failure. Further, the loose pulley could damage engine compartment components or puncture the hood and become a hazard to pedestrians or other road users.
Q1 Who do I contact if a member of the press contacts me about this recall?A
Please ensure Press enquiries are referred to the Jaguar Land Rover North America Press Office to the attention of:
Stuart Schorr Vice President, Communications & Public Affairs Jaguar Land Rover North America, LLC sschorr@jaguarlandrover.com Office: +1-201-760-8561 Cell: +1-201-739-2964 |
Nathan Hoyt Product Communications Manager Jaguar Land Rover North America, LLC nhoyt@jaguarlandrover.com Office: +1-201-818-8316 Cell: +1-551-427-3199 |
Q2 Why is Jaguar Land Rover recalling certain Land Rover vehicles?
Vehicles in this condition pose an unreasonable risk to safety.
Q3 Can you tell me more about what is wrong with the vehicles?
The V6 and V8 engines installed in certain 2019 Model Year Land Rover Discovery, Range Rover Velar, Range Rover Sport, and Range Rover vehicles may have been installed with a crankshaft pulley bolt manufactured away from specification which has the potential to develop cracks on the surface of the bolt, leading to hydrogen embrittlement. These cracks will cause the bolt to fracture over time, causing a loss of retention of the crankshaft pulley, allowing the pulley to oscillate and subsequently break the crankshaft nose, leading to engine failure.
Q4 How would the customer become aware of potentially having this concern?
It is possible there will be increased engine vibration, warning lamps may illuminate, and unusual engine noises experienced as the failure progressively occurs.
Q5 Does this concern affect vehicle safety?
Yes. All of the engines with affected bolts installed are at risk of suffering this failure, such that the rate of the risk of engine stall with minimal warning poses an unreasonable risk to safety.
Q6 Has Jaguar Land Rover Limited received many complaints?
No, there have been no complaints received related to this issue.
Q7 Have there been any accidents or injuries?
Jaguar Land Rover is not aware of any accidents or injuries which have been attributed to this issue.
Q8 How was the condition discovered?
A concern was raised from the Bridgend Engine Assembly plant.
Q9 How long has Jaguar Land Rover known about this problem?
Investigation into this concern started on December 11, 2018.
Q10 Is the defect leading you to any concerns regarding the reliability of a system, which is supposed to be designed and engineered for the passengers’ safety? What type of measures are you planning to take?
We have no concerns with the overall reliability of the vehicle. Jaguar Land Rover carefully monitors field data to make sure that any matters relating to safety and compliance are rigorously investigated.
Q11 What has Jaguar Land Rover done in production?
The affected batch of bolts has been replaced with bolts manufactured to known condition (batch audit in lab confirmed no stress cracks and hardness are back to within process control).
Q12 What will an authorized Land Rover retailer do to the vehicles?
Authorized Land Rover retailers will replace the center main crankshaft damper/pulley bolt with one of the correct specification.
Q13 Which vehicles are affected by this recall?
The following 2019MY Land Rover vehicles, manufactured from October 12, 2018, to December 13, 2018, are affected:
Discovery ……………………….. SALRG2RV6K2400447-SALRG2RV7K2400585
Range Rover Velar ………… SALYM2EV3KA200254-SALYL2FV0KA207616
……………………………………. SALYB2EV3KA798495-SALYL2EV6KA799721
Range Rover Sport ……….. SALWV2SVXKA421049-SALWR2RVXKA421871
……………………………………. SALWR2RV1KA829398-SALWZ2SE8KA839338
Range Rover ………………….. SALGS2SV7KA531120-SALGS2RE7KA541393
Q14 Are other Jaguar Land Rover models affected by these actions?
Yes, certain 2019MY Jaguar F-PACE, F-TYPE, and XJ models are affected and are being remedied by Safety Recall N181.
Q15 Are parts available to rework vehicles?
Yes, the necessary parts are available for authorized Land Rover retailers to conduct this repair.
Q16 How much will the recall cost Jaguar Land Rover?
Cost was not a factor in deciding to recall these vehicles.
Q17 How do I know if my vehicle is affected?
All owners of potentially affected vehicles will shortly receive a letter inviting them to contact an authorized Land Rover retailer for the work to be carried out.
Q18 How long does it take for the vehicle to be inspected and repaired?
The work will be carried out as quickly and efficiently as possible in order to minimize inconvenience to customers and is expected to take up to 2.5 hours. Due to retailer schedules, vehicles may be required for longer.
Q19 Can I continue to drive my vehicle safely until it has been recalled?
Customers are advised to contact an authorized Land Rover retailer should they have any concerns regarding their vehicles.
IMPORTANT SAFETY RECALL
This notice applies to your vehicle,
February 12, 2019
Safety Recall N276: Center Main Crankshaft Pulley Bolt
Vehicles Affected: Land Rover Discovery, Range Rover Velar, Range Rover Sport and Range Rover.
Model Year: 2019
National Highway Traffic Safety Administration (NHTSA) Recall Number: 19V-040
Dear Land Rover Owner:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Land Rover has decided that a defect which relates to motor vehicle safety exists in certain 2019 model year Land Rover Discovery, Range Rover Velar, Range Rover Sport, and Range Rover vehicles.
Your vehicle is included in this Recall action.
What is the reason for this program?
The center main crankshaft damper/pulley bolt may fracture. A batch of bolts has been manufactured away from specification and therefore has the potential to develop cracks on the surface of the bolt. These cracks cause the bolt to fracture over time, leading to a loss of retention of the crankshaft pulley. Where bolt fracture occurs, it will ultimately cause the crankshaft nose to break, leading to engine failure. (Thereby deleting pulley will oscillate for a period).
Fracture of the crankshaft pulley bolt and associated breakage of the crankshaft nose will lead to the vehicle displaying a number of warning lights, quickly followed by loud noises, engine power loss and the potential for engine failure. Further, the loose pulley could damage engine compartment components or puncture the hood and become a hazard to pedestrians or other road users.
Vehicles with a bolt from the affected batch may stall while in motion with no ability to be restarted.
Engine stall with minimal warning poses an unreasonable risk to safety and may result in a crash.
What will Land Rover and your authorized Land Rover Retailer do?
Land Rover is carrying out a recall of the vehicles mentioned above. An authorized Land Rover retailer will replace the center main crankshaft damper/pulley bolt with one of the correct specification.
There will be no charge for this repair under this program.
What should you do?
Please contact your preferred authorized Land Rover retailer, provide them with your Vehicle
Identification Number (VIN), and request a service date to complete the work required under Program Code ‘N276’ completed on your vehicle.
Attention Leasing Agencies: If you are a vehicle lessor, Federal Regulations require you to forward this notice to your lessee within TEN (10) days.
How long will it take?
The work will be carried out as quickly and efficiently as possible in order to minimize inconvenience to customers and is expected to take up to 2.5 hours, although your retailer may need your vehicle for a longer time. Your retailer can provide you with a better estimate of the overall time for the service visit.
Moved or no longer own this Land Rover vehicle?
If you are no longer the owner of this vehicle, Land Rover would appreciate the name and address of the new owner, using the return postage-paid card enclosed.
What should you do if you have further questions?
If you have any questions or concerns, please contact the Service Manager at your authorized Land Rover retailer for assistance. If you have queries or concerns that your local Retailer cannot address, please contact the Land Rover Customer Relationship Centre at 1-800-637-6837, Option 9, and one of our representatives will be happy to assist you.
You may also contact us by email using the following address: Irweb2@jaguarIandrover.com,
If you have the need to contact Land Rover by mail, please use the following address:
Jaguar Land Rover North America, LLC
ATTN: Customer Relationship Center
100 Jaguar Land Rover Way
Mahwah, NJ 07495
If after having attempted to take advantage of this recall you believe you have not been able to have your vehicle remedied without charge and within a reasonable amount of time, you may submit a complaint to the:
Administrator, National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Washington, D.C. 20590
Or you call the toll-free Vehicle safety Hotline at 888-327-4236 (TTY: 800-424-9153), or go to https://www.safercar.gov.
Land Rover appreciates your confidence in our product and wish to do everything we can to retain that confidence. We recognize this service visit may be an inconvenience to you. Land Rover, in cooperation with your authorized Land Rover retailer, will strive to minimize any inconvenience to you caused by this program.
Sincerely,
Eric Johnstön
Vice President Customer Service
Jaguar Land Rover North America, LLC
4 Affected Products
Vehicles
MAKE | MODEL | YEAR |
LAND ROVER | DISCOVERY | 2019 |
LAND ROVER | RANGE ROVER | 2019 |
LAND ROVER | RANGE ROVER SPORT | 2019 |
LAND ROVER | RANGE ROVER VELAR | 2019 |
11 Associated Documents
Remedy Instructions and TSB
RCRIT-19V040-6323.pdf 562.251KB
ISSUED Owner Notification Letter(Part 577)
RCONL-19V040-5716.pdf 1179.584KB
Chronology
RMISC-19V040-0662.pdf 97.509KB
Defect Notice 573 Report
RCLRPT-19V040-4232.PDF 216.394KB
Recall Acknowledgement
RCAK-19V040-4188.pdf 246.167KB
Manufacturer Notices(to Dealers,etc) – PORT VEHICLE RELEASE UPDATE / SAFETY RECALL CENTER MAIN CRANKSHAFT PULLEY
RCMN-19V040-6085.pdf 135.457KB
Manufacturer Notices(to Dealers,etc)- PORT VEHICLE RELEASE UPDATE / SAFETY RECALL CENTER MAIN CRANKSHAFT PULLEY
RCMN-19V040-1534.pdf 135.457KB
Manufacturer Notices(to Dealers,etc) – SAFETY RECALL N276: CENTER MAIN CRANKSHAFT PULLEY BOLT
RCMN-19V040-4882.pdf 641.768KB
Recall Quarterly Report #1, 2019-1
RCLQRT-19V040-2337.PDF 211.149KB
Recall Quarterly Report #2, 2019-2
RCLQRT-19V040-0727.PDF 211.25KB
Recall Quarterly Report #3, 2019-3
RCLQRT-19V040-2445.PDF 211.333KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V040&docType=RCL
- 【Wifi Upgrade】- After you receive our products, for better product experience as well as car diagnositic, please connect to wifi/phone hotspot and accept or take the initiative to update APP operating system and car brand diagnostic software.
- 【Professional 6 System Diagnosis】- This OBD2 scanner has the most commonly system: ABS, SRS, Transmission, Engine, BCM and TPMS, which offers solution to pinpoint troubles of your cars.
- 【7 Most Useful Reset Services】- The car scanner can provides 7 hot maintenance reset: Oil EPB SAS ETS TPMS ABS DF. These powerful reset functions will make your car safer and more reliable.
- 【5" Large HD Touchscreen】- This car diagnostic scanner is equipped with a 5" color HD touchscreen: Compared with other screens, the displayed data and charts will be clearer.
- 【4 in 1 Live Data Display】- The car scanner tool shows live data of each control module by text or graphs, up to 4 parameters can be displayed at the same time. Test reports are easy to share and print.
- 👍[New & Outstanding X431 PRO5 Scanner] LAUNCH X431 PRO5 scan tool, upgrade of LAUNCH X431 PRO3 & X431 V+ PRO, configures a SmartBox 3.0 VCI (J2534/DoIP/CAN FD compliant) that performs online programming for BMW & Benz models as OEM level. More powerful features: Online Coding for Porsche/Audi, Heavy-duty Truck Diagnostics, VAG Guided Functions, 50+ Services, etc., bring ease & efficiency. Powerful software even covers online diagnostics for FCA cars & newer model data.
- [J2534 Programming with Smartbox3.0] If you’re seeking all-in-one solutions for car ECU tuning needs, LAUNCH X431 PRO5 programming tool is ready to work for you. Support online programming for BMW&Benz and hold exclusive programming backup/restoration. Come with a Smartbox 3.0 device of J2534 standard and pair with a PC to download OEM software to upgrade the ECU software, which maximizes the vehicle performance and minimizes diagnostic problems.
- [ECU Coding Customizes All You Want] With top of the tech instruction and vehicle data, LAUNCH X431 PRO5 diagnostic scanner performs well in ECU Coding and makes everything easier 1) recode adaptive data after ECU replacement 2) personalization/retrofit to improve car comfort: deactivate auto start-stop or change interior lights 3) coding data backup/reserve 4) online coding for BMW/Benz/Porsche/VW/Skoda/Seat 5) online matching/calibration for VW/for Audi, etc.
- [Huge Vehicle Software Database] LAUNCH scanner PRO5 can be nominated as a powerful troubleshooter for 99% of post 1996-automobiles. Provide abundant exclusive functions for effortless diagnostics: Benz/BMW Data Backup/Restoration; Benz/BMW Manual Mode Programming; Benz SCN Coding/Variant Coding; BMW Coding (with newer data to 2022.03); AutoAuth for FCA SGW(2018 later); Various Online Coding Data for VW/for Audi, etc. 2-Year free updating will keep renewing the data for more vehicles.
- [AutoAuth Access & 50+ Services] Partnered AutoAuth FCA US, LAUNCH scanner can directly login to the AutoAuth account and secure check (reading DTC, active test, reset functions, etc.) for FCA vehicles. 50+ services that are needed for repair shops have been packed in X431 PRO5 auto scanner, such as Hot functions (Oil Reset, EPB Reset, SAS Reset, ABS Bleeding, etc.) and Comprehensive functions (High Voltage Battery Diagnostics, Transport Mode),
- 🏆【2023 NEWEST LAUNCH FIRST Advanced Scan Tool Compatible With 12V And 24V Vehicles】Design for Passenger&Commercial Vehicles 2in1:The 1st ALL-IN-ONE scanner from LAUNCH ,work for Cars/Trucks/buses/trailers/excavators/diesel engine/construction machinery/ /pick-up/etc.【AutoAuth for FCA SGW】Support Chrysler,Dodge,Jeep,Alfa Romeo and Fiat after 2017【2023 OE-Level features】Guiding Functions,Variant Coding with Benz,Modification for BMW,Offline Coding,Customization,Personalization,Online Calibration.
- 🚗【Over 60 Service Reset Functions + Bi-Directional + ECU Coding + Adaptation + Intialization + Matching】LAUNCH X431 PRO3S+ HDIII can send commands to the system/component to test their working status for Active Test. Beside,this scan tool can also support ECU Coding, Key programming, Adaptation, Matching, 60+ reset service functions like SAS/EPB/TPMS/DPF/IMMO/Oil/Brake/GEARBOX Reset, ABS Bleed, Injector coding, etc... Powerful dealership level Functions can fully meet your needs.
- 👍【2023 BEST Advanced Hardware & All Systems Diagnosis+Topology Display】LAUNCH X431 PRO3S+ HDIII automotive scanner equipped with Android 9.0 operating system, 10.1-inch HD IPS(1920*1200) touchscreen, 7000mAh rechargeable battery (up to 12+ hours battery life), 3+32G memory(support 128G Expand memory). Support All systems Diagnostic including ENG, AT, ECM, TCM, ABS, SRS, BCM, IMMO, BMS, TPMS, SAS, Fuel System, Light System and A/C system,more.
- 🚛【Wider Vehicle Coverage of 12V & 24V Vehicles + 24 Languages】LAUNCH X431 PRO3S+ HDIII automotive scanner is ALL-IN-ONE Scan Tool for 12V cars and 24V Heavy-duty trucks which provide the most extensive multi-brand coverage and comprehensive diagnostics for you. Passenger vehicles:Cars, SUV, MPV, Pickup truck; Commercial vehicles:Heavy Duty Truck, Passenger Bus, Excavator, Tractor, Recreational Vehicle. 24 Language: English,French,Spanish,German,Russian,Japanese,Portuguese,Italian,Polish,more.
- 🔥【User Friendly, Easy To Use】LAUNCH X431 PRO3S+ HDIII supports One-Click Auto VIN Detect, One-Click WiFi Update, One-Click Generate Graph. In addition, this LAUNCH scan tool also support remote diagnostic, diagnostic feedback and respond, Live data graphing, data Stream record and playback, Generate Health Report (Share & Print). Bring you a more convenient and comfortable experience to a large extent.
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on, quickly read and clear diagnostic trouble codes, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information. Instead of taking car to mechanic shop, you can use it to check the trouble code and show code definition by yourself.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed device with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble codes in seconds. If you want to find out the cause of the check engine light, this device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. This is not the case with the AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Check compatibility with your vehicle model before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- LCD Display - Designed with a clear display LCD screen (128 x 64 pixels) - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 5 IN 1 DIAGNOSTIC SCANNER: This is an OBDII scanner and 4 systems diagnostic tool. The AUTOPHIX 3210 PRO Bluetooth Auto Scanner not only has OBDII diagnostic function, but can also be used as an ABS/SRS/transmission scanner and check engine code reader. When it is an OBD2 scanner, you can use it to check if your car is ready for annual test via I/M preparation menu. In addition, the built-in DTC library, live data stream, data playback, performance testing and many more such functions are supported by it.
- RELIABLE CAR HEALTH MONITOR: Are you confused when the ABS/SRS/Transmission/Check Engine warning light is blinking? The AUTOPHIX 3210 PRO Bluetooth Scanner will help you to do a thorough scanning and inspecting of your car and find out the root cause, which saves your time and money. Tip:The warning light will be turned off after the problem is solved. Airbag crash/collision data cannot be cleared, even if you replace the airbag with a new one.
- QUICK DIAGNOSIS: The 3210 PRO is the newest 2024 Enhanced 4-System Bluetooth Code Reader that retrieves vehicle information, reads/clears trouble codes, and displays a 4-in-1 live data stream. You'll easily find out what's wrong with your car. In just a few minutes, you'll be in control of your car!
- EXCLUSIVE APP: Are you tired of the following with third party apps? For example: 1.need to download different apps for different cars? 2. require extra download fees? 3. only support a few functions? 4. can only use one of Android and iOS? Now!One AUTOPHIX 3210 PRO Scanner is enough to solve all the above problems. The must-have wireless/bluetooth automotive diagnostic tool/code reader for today's car owners. iPhone iOS, iPad, Android can be downloaded for free without any additional subscription fees.
- ADVANCED DATA FLOW DISPLAY:AUTOPHIX 3210 PRO Bluetooth code reader allows you to graphically display your vehicle's data flow instead of boring text, including engine coolant temperature, engine RPM, vehicle speed, absolute throttle position, control module voltage, etc. You can view different parameter values corresponding to different times. The advanced data streams provide useful information for entry-level professionals and diyers who can troubleshoot vehicle problems quickly and efficiently.
- 🙂[Compact But Powerful]: A-premium AD100 is a powerful multi-functional check engine code reader, it brings together a variety of mainstream functions in one, can easily and efficiently check the cause of the check engine light on, but also can accurately read the fault code, and after you fix the problem, clear the fault code, let your car back to health. If you don't understand the fault code, that's OK! the car code reader has a built-in DTC library, with 100000 DTC data for you to look up
- 🙂[Versatile Assistant]: This obd2 scanner also has many practical features that can help you effectively diagnose the specific cause of car failure, such as: view freeze frame, read data stream, show real-time curve (fuel system, engine speed, coolant temperature, load value ...) , view car information, O2 sensor test, EVPA system test and etc. with these functions, you can quickly know whether the car is in a state of health, saving you precious time and much cost (pay to garages lol lol !!!)
- 🙂[Useful I/M Readiness Test]: Still worried about your car passing sm-og check? And you don't want to spend a lot of diagnostic money taking your car to local garages to checked it out. Don't worry, AD100 code readers & scan tools built-in I/M monitor readiness function allows you to accurately read and obtain data (MIL, fuel system, misfire, catalyst...), and with this data, you can know if your car meets the check standards
- 🙂[Simple But Useful - Battery Test]: This car diagnostic scanner has a battery test function, just sit in the driver's seat, you can check the real-time voltage of the 12V battery, and confirm whether the current battery age is serious. With it, you don't have to open the hood, and use battery voltage tester to check, so that you are more convenient. In the market, battery testing is only installed on more advanced scanner, but our team built it into the AD100 so that anyone can experience it
- 🙂[Easy to Use]: The fixd car diagnostic tool has a 1.77-inch display and a 3.3-foot-long cable that allows you to see details in dim environment.The car scanner has an advanced 32bit cpu, which can easily deal with daily operation. The body shell is made of strong plastic, which will not be damaged if accidentally dropped to the ground, while ensuring the normal operation of the obd scanner.The appearance and buttons are all humanized, and the grip and operation are very comfortable
- 👍【Why Choose LAUNCH scanner X431 PRO5】It is the original LAUNCH X431 scan tool, the 2024 upgraded version of PROS V+, X431 PRO3 and V+ 4.0, which is a worthwhile investment for repair shops and mechanics. LAUNCH X431 PRO 5, all is set to OE-level standards with 1) J2534 ECU Programming & 50+ service same as PAD Series; 2) Bi-directional control + All system diagnostics as Snap-on scanner; 3) Online Coding functions directly connect to OEM server; 4) Top-notch Topology Mapping function
- 👍【J2534 Programming with Smart Box 3.0】 What is super SmartBox 3.0 VCI? Worth 1000$, Smart Box 3.0 is backed on new ISO9141/J1850/SAE J2610/CANFD/DOIP, which enables you to run 14x quicker data trans and advanced OEM J2534 reprogramming for B-MW, Ben-z, F-ord, Jaguar, Land Rover, GW, Volvo, etc. (please reach to us for more details). It also serves as a wireless VCI allowing the vehicle to transmit data to the diagnostic tablet without a physical connection.
- 👍【New Released Topology Mapping】Update your X431 PRO 5 to V 7.03.014 to gain Topology Mapping function. This advanced feature, typically found only on tools costing over $3000, provides a comprehensive view of a vehicle's data bus configurations, improving repair efficiency by up to 90%. With just one click, you can gain insights into the layout of a vehicle's system and clear any troubles. Compatibility with your vehicle's brand should be verified by checking the VIN before purchasing.
- 👍【LAUNCH X431 PRO 5 with Powerful 50+ Services】Especially designed for pro mechanics and big repair shops, Launch X431 scanner PRO5 is equipped with 50+ hot reset functions for 150 car makes which same as X431 PAD serious. Easy to navigate and help you do ABS Bleeding, TPMS Reset, Oil Reset, EPB Reset, Suspension, BMS, Injector Coding, IMMO, Power balance, Throttle Matching and more. 🚩Notice: we offer 2-year f ree update while other brands generally 1 year.
- 👍【A-ctive Test + Local-smith Level ECU Coding】Come with appealing bi-directional control to troubleshoot all possible problems for full systems within 5 min.This LAUNCH X431 PRO scanner even develops all practical functions needed by all technicians:1) ECU Coding for replacing, match, relearn, recode new ECU modules;2) Online Coding for B-MW, VW, Porsche, Ben-z to surf OEM data;3) VAG Guided functions ease complex issues;4) Personalization & ADAS improving car performance and driving safety.
- LAUNCH X431 PAD VII Elite,2024 Top Diagnostic Scanner: High-end ECU programming backup/restore for 30+ car brands scan tool, ECU/SCN coding, J2534/RP1210/D-PDU/Do-IP/CANFD, topology mapping, 60+ Reset, guided functions.
- Huge-Upgraded ECU Programming & Coding: Working on 30+ car brands:1) Backup/Restore data from original ECUs;2) Online Programming;3) R-etrofit;4) ECU Upgrade.Coding features:Recode ECU Data, Personalization and loads of more.
- UNMATCHED COVERAGE: Launch X431 PADVII diagnostic tool works on over 200 car brands, support 12/24V passenger cars and commercial vehicles;Secured Gateway Access (SGW). and J2534/D-PDU/RP1210 and CAN2.0/CAFD/DoIP protocols.
- TOP INTELLIGENT DIAGNOSTIC: LAUNCH X431 PADVII offer topology mapping overview all-systems status.Pin detection to detect pin volt, data rate.Guided functions,repair tips,DTC Analysis,Component Measurement,and Relevant Cases.
- [ Pin Detection & Guided Functions] LAUNCH X431 PAD VII scan tool with Guided Function (for V.A.G) allow on-screen prompts for proper diagnostic. Pin Detection allow detecting DLC pins voltage and access protocol types to troubleshoot your DLC port.
- MADE FOR HOME MECHANICS - This is more than an OBD2 code reader. It offers professional-level functions like car battery reset, hybrid diagnostics, module scanning, and supports English, Spanish, and French.
- PASS YOUR EMISSIONS TEST - With our OBD2 scanner, you can understand your vehicle's emissions status before the state does. It helps ensure you're ready to pass your smog check, making the whole process hassle-free.
- REAL-TIME LIVE DATA - View essential car data like RPM, speed, and oil temperature in real-time. Test your battery and alternator to assess whether professional help is needed.
- WIDE RANGE COMPATIBILITY - Our car code reader and reset tool works with all OBD2 compliant domestic and foreign vehicles sold in the USA made after 1996. This includes cars like sedans, trucks, and SUVs, making it a versatile tool for any DIYer.
- USA DESIGNED & SUPPORTED - We are a Southern California based company and take pride by offering products that are designed and supported by ASE Certified Technicians right here in sunny California. Have questions? Need help? Never hesitate to reach out, our friendly automotive techs are ready to help.
Last update on 2024-03-03 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START3/20/2019 N276NAS1 – SAFETY RECALL: Center Main Crankshaft Pulley Bolt | TOPIx
https://topix.jaguar.jlrext.com/topix/content/document/view?id=956678 1/14
© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians
with the knowledge, tools, and equipment required to do the job properly and safely. It informs these
Technicians of conditions that may occur on some vehicles, or provides information that could assist in
proper vehicle service. The procedures should not be performed by ‘do-it-yourselfers’. If you are not a
Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Land
Rover service facility to determine whether this bulletin applies to a specific vehicle.
N 2 7 6 N A S 1
TECHNICAL BULLETIN
3 1 J A N 2 0 1 9
I N F O R M AT I O N
303-01
S E C T I O N :
SAFETY RECALL: Center Main Crankshaft Pulley Bolt
S U B J E C T / C O N C E R N :
MODEL:
MODEL
YEAR:
VIN:
ASSEMBLY
PLANT:
APPLICABILITY:
Discovery (LR) 2019 400447-
400585
Nitra (Slovakia) V6 S/C 3.0L Petrol
A F F E C T E D V E H I C L E R A N G E :
3/20/2019 N276NAS1 – SAFETY RECALL: Center Main Crankshaft Pulley Bolt | TOPIx
https://topix.jaguar.jlrext.com/topix/content/document/view?id=956678 2/14
MODEL:
MODEL
YEAR:
VIN:
ASSEMBLY
PLANT:
APPLICABILITY:
Range Rover Velar (LY) 2019 798495-
799721
Solihull V6 S/C 3.0L Petrol
Range Rover Velar (LY) 2019 200254-
207616
Solihull V6 S/C 3.0L Petrol
Range Rover Sport
(LW)
2019 421049-
421871
Solihull V6 S/C 3.0L Petrol /V8 S/C 5.0L
Petrol
Range Rover Sport
(LW)
2019 829398-
839338
Solihull V6 S/C 3.0L Petrol /V8 S/C 5.0L
Petrol
Range Rover (LG) 2019 531120-
541393
Solihull V6 S/C 3.0L Petrol /V8 S/C 5.0L
Petrol
NORTH AMERICA
M A R K E T S :
This Safety Recall supersedes Update Prior to Sale UPS13118 with immediate effect.
SITUATION:
An issue has been identified on certain Land Rover vehicles within the listed Affected Vehicle Range
where the center main crankshaft damper/pulley bolt(s) may fracture. A batch of bolts has been
manufactured away from specification and therefore has the potential to develop cracks on the surface
of the bolt(s), leading to hydrogen embrittlement. These cracks cause the bolt(s) to fracture over time,
leading to a loss of retention of the crankshaft pulley. Where bolt(s) fracture occurs, the pulley will
oscillate for a period, but ultimately the crankshaft nose will break, leading to engine failure.
Fracture of the center main crankshaft pulley bolt(s) and associated breakage of the crankshaft nose
will lead to the vehicle displaying a number of warning lights, quickly followed by loud noises, engine
power loss, and the potential for engine failure. Further, the loose pulley could damage engine
compartment components or puncture the hood and become a hazard to pedestrians or other road
users.
C O N D I T I O N S U M M A R Y :
3/20/2019 N276NAS1 – SAFETY RECALL: Center Main Crankshaft Pulley Bolt | TOPIx
https://topix.jaguar.jlrext.com/topix/content/document/view?id=956678 3/14
DESCRIPTION PART NUMBER/SUNDRY
CODE
QUANTITY/VALUE EXPECTED PERCENTAGE
DEMAND
Bolt(s) – Center main crankshaft
pulley
LR011952 1 100
Refer to TOPIx Workshop Manual/Workshop Procedure for any required special tools.
Vehicles with a bolt(s) from the affected batch may cut out while in motion with no ability to be
restarted.
Engine cut-out with minimal warning poses an unreasonable risk to safety and may result in a crash.
ACTION:
Retailers are required to HOLD affected new vehicles that are within your control and refrain from
releasing the vehicles for new vehicle sale pending completion of the Diagnostic/Workshop Procedure
detailed in this Technical Bulletin. Unsold vehicles should have this performed as part of the Pre-
Delivery Inspection (PDI) process but must have it completed prior to vehicle handover to the
customer.
Affected vehicles already in the hands of customers should be updated at the next available
opportunity.
P A R T S :
NOTE:
Only order the expected percentage demand of parts identified.
S P E C I A L T O O L S :
W A R R A N T Y :
NOTE:
Use the Jaguar Land Rover claims submission system to make sure that a vehicle is affected by
this program prior to undertaking any rework action.
3/20/2019 N276NAS1 – SAFETY RECALL: Center Main Crankshaft Pulley Bolt | TOPIx
https://topix.jaguar.jlrext.com/topix/content/document/view?id=956678 4/14
At the time of confirming a booking for vehicle repair, make sure that all open Recall and Service
Actions are identified to make sure the correct parts are available and adequate workshop time is
allocated for repairs to be completed at one visit.
Warranty claims must be submitted quoting the Program Code and the relevant Option Code; this will
result in payment of the stated time. The SRO and parts information is included for information only.
The Option Code(s) that allows for the drive in/drive out allowance may only be claimed if the vehicle
is brought back into the workshop for this action alone to be undertaken.
Repair procedures are under constant review and therefore times/prices are subject to change; those
quoted here must be taken as guidance only. Use TOPIx to obtain the latest repair time.
Warranty claims must be submitted or payment within 30 calendar days of completion of the repair.
PROGRAM
CODE
OPTION
CODE
DESCRIPTION SRO TIME
(HOURS)
PART
NUMBER/SUNDRY
CODE
QUANTITY/VALUE
N276 A Discovery, Range
Rover Sport,
Range Rover
Crankshaft pu lley
bolt(s) – Renew
12.21.89.01 0.9 LR011952 1
N276 B Discovery, Range
Rover Sport,
Range Rover
Crankshaft pu lley
bolt(s) – Renew
Drive in/drive ou t
12.21.89.01
02.02.02
0.9
0.2
LR011952
–
1
–
N276 C Range Rover
Velar
Crank shaft pulley
bolt(s) – Renew
Drive in/drive ou t
12.21.89.01 1.5 LR011952 1
N276 D Range Rover
Velar
Crank shaft pulley
bolt(s) – Renew
Drive in/drive ou t
12.21.89.01
02.02.02
1.5
0.2
LR011952
–
1
–
Normal Warranty policies and procedures apply.
3/20/2019 N276NAS1 – SAFETY RECALL: Center Main Crankshaft Pulley Bolt | TOPIx
https://topix.jaguar.jlrext.com/topix/content/document/view?id=956678 5/14
CAUTION:
The center main crankshaft pulley/damper bolt is left-hand thread.
W O R K S H O P P R O C E D U R E :
NOTES:
Some variation in the illustrations may occur, but the essential information is always correct.
Some components shown removed for clarity.
Remove the cooling fan and shroud (see TOPIx Workshop Manual section 303-03: Engine
Cooling – Cooling Fan and Shroud).
1
NOTE:
Discovery, Range Rover Sport, Range Rover only.
When all tasks are finished, 1 go to Step 3.
Remove the radiator (see TOPIx Workshop Manual section 303-03: Engine Cooling – Radiator).
2
NOTE:
Range Rover Velar only.
1 When all tasks are finished, go to Step 3.
Remove the engine undershield (see TOPIx Workshop Manual section 501-02: Front End Body
Panels – Engine Undershield).
3
4
NOTE:
Do not discard the 2 outer crankshaft pulley bolt(s).
3/20/2019 N276NAS1 – SAFETY RECALL: Center Main Crankshaft Pulley Bolt | TOPIx
https://topix.jaguar.jlrext.com/topix/content/document/view?id=956678 6/14
Remove and set to the side only the 2 highlighted outer crankshaft pulley bolt(s).
Install the special tools 303-1437 and 303-1438 as shown.
5
3/20/2019 N276NAS1 – SAFETY RECALL: Center Main Crankshaft Pulley Bolt | TOPIx
https://topix.jaguar.jlrext.com/topix/content/document/view?id=956678 7/14
Using the bolt(s) for special tool 303-1437, install the 2 bolt(s) to the crankshaft pulley.
6
Torque: 25 Nm
CAUTION:
Use care when positioning the vehicle stand.
Use a suitable vehicle stand to support the special tools 303-1437 and 303-1438.
7
3/20/2019 N276NAS1 – SAFETY RECALL: Center Main Crankshaft Pulley Bolt | TOPIx
https://topix.jaguar.jlrext.com/topix/content/document/view?id=956678 8/14
CAUTIONS:
The center main crankshaft pulley/damper bolt(s) is left-hand thread.
Do not use air tools to remove the center main crankshaft pulley bolt(s).
Remove the center main crankshaft pulley bolt(s).
8
NOTE:
Loosen the center main crankshaft pulley bolt(s) by hand progressively.
If the center main crankshaft pulley bolt(s) does not break during removal,
go to Step 9.
If the center main crankshaft pulley bolt(s) does break, remove the broken
bolt from the crankshaft without damage to the crankshaft and
pulley/damper.
NOTE:
The time for removing a broken center main crankshaft pulley bolt(s) must be
claimed under Warranty as a separate claim.
If assistance is required, submit a TA (Technical Assistance) request.
3/20/2019 N276NAS1 – SAFETY RECALL: Center Main Crankshaft Pulley Bolt | TOPIx
https://topix.jaguar.jlrext.com/topix/content/document/view?id=956678 9/14
Remove the 2 bolt(s) from special tool 303-1437.
9
CAUTION:
Use care when removing the vehicle stand.
Remove the vehicle stand and special tools 303-1437 and 303-1438.
10
CAUTION:
The center main crankshaft pulley/damper bolt is left-hand thread.
11
3/20/2019 N276NAS1 – SAFETY RECALL: Center Main Crankshaft Pulley Bolt | TOPIx
https://topix.jaguar.jlrext.com/topix/content/document/view?id=956678 10/14
Remove and discard the center main crankshaft pulley bolt(s).
CAUTION:
The center main crankshaft pulley/damper bolt is left-hand thread.
Install the new center main crankshaft pulley bolt(s).
12
CAUTION:
13
3/20/2019 N276NAS1 – SAFETY RECALL: Center Main Crankshaft Pulley Bolt | TOPIx
https://topix.jaguar.jlrext.com/topix/content/document/view?id=956678 11/14
Use care when positioning the vehicle stand.
Install the special tools 303-1437 and 303-1438.
Using the bolt(s) for special tool 303-1437, install the 2 bolt(s) to the crankshaft
pulley.
1
Torque: 25 Nm
Use a vehicle stand to support the special 2 tools 303-1437 and 303-1438.
CAUTION:
The center main crankshaft pulley/damper bolt is left-hand thread.
14
3/20/2019 N276NAS1 – SAFETY RECALL: Center Main Crankshaft Pulley Bolt | TOPIx
https://topix.jaguar.jlrext.com/topix/content/document/view?id=956678 12/14
Tighten the center main crankshaft pulley bolt(s) in 2 stages. Make sure that the socket — not
the torque wrench — is turned through 270º.
Torque:
Stage 1: 200 Nm
Stage 2: 270º
CAUTION:
Use care when removing the vehicle stand.
15
3/20/2019 N276NAS1 – SAFETY RECALL: Center Main Crankshaft Pulley Bolt | TOPIx
https://topix.jaguar.jlrext.com/topix/content/document/view?id=956678 13/14
Remove the vehicle stand and special tools 303-1437 and 303-1438.
Install the 2 original outer crankshaft pulley bolt(s).
16
NOTE:
The original M10 bolt(s) can be reused.
Clean the original outer crankshaft 1 pulley bolt(s).
2 Apply Loctite 270 to the threads.
Torque: 65 Nm
Install the engine undershield (see TOPIx Workshop Manual section 501-02: Front End Body
Panels – Engine Undershield).
17
Install the cooling fan and shroud (see TOPIx Workshop Manual section 303-03: Engine
Cooling – Cooling Fan and Shroud).
18
NOTE:
Discovery, Range Rover Sport, Range Rover only.
1 When all tasks are finished, release the vehicle.
3/20/2019 N276NAS1 – SAFETY RECALL: Center Main Crankshaft Pulley Bolt | TOPIx
https://topix.jaguar.jlrext.com/topix/content/document/view?id=956678 14/14
Install the radiator (see TOPIx Workshop Manual section 303-03: Engine Cooling – Radiator).
19
NOTE:
Range Rover Velar only.
When all tasks are finished, release 1 the vehicle.
SEOCONTENT-END