H412 – Seat Belt Pretensioners May Not Restrain Properly – 2022 Jaguar F-Type, F-Pace, & XF

July 21, 2022 NHTSA CAMPAIGN NUMBER: 22V524000

Seat Belt Pretensioners May Not Restrain Properly

Improperly restrained occupants have an increased risk of injury during a crash.

 

NHTSA Campaign Number: 22V524

Manufacturer Jaguar Land Rover North America, LLC

Components SEAT BELTS

Potential Number of Units Affected 176

 

Summary

Jaguar Land Rover North America, LLC (Jaguar) is recalling certain 2022 Jaguar F-Type, F-Pace, and XF vehicles. The driver and front passenger seat belt pretensioners may be damaged, which can cause the seat belts to not properly restrain occupants.

 

Remedy

Dealers will inspect and replace the front seat belt assemblies, as necessary, free of charge. Owner notification letters were mailed September 15, 2022. Owners may contact Jaguar customer service at 1-800-452-4827. Jaguar’s number for this recall is H412.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 

Check if your Jaguar has a Recall

 


DESCRIPTION OF DEFECT

A concern has been identified on certain 2022MY Jaguar F-TYPE, XF, and F-PACE vehicles where a damaged front seat belt pretensioner tube may have been installed on the seat belt retractor.

 

AFFECTED VEHICLE RANGE

F-TYPE
Model Year: ………………….. 2022
VIN: ………………………………… SAJDD1EE9NCK78757 – SAJD85EE3NCK79169

XF
Model Year: ………………….. 2022
VIN: ………………………………… SAJB4GX1NC91515 – SAJBL4GX5NCY91713

F-PACE
Model Year: ………………….. 2022
VIN: ………………………………… SADCJEX2NA693574 – SADCZ2EE0NA694892

A total of approximately 176 vehicles in the United States and Federalized Territories.

 

EFFECT OF VEHICLE OPERATION

A damaged front seat belt pretensioner tube could prevent the pretensioner from correctly operating by not pre-tensioning the seat belt in the event of an accident where it would normally operate. This may result in a reduced level or complete loss of pre-tensioning in the event of a crash and increased occupant injury.

 

SERVICE PROGRAM/REWORK ACTION

Owners will be notified by mail and instructed to take their vehicle to an authorized retailer who will inspect the seat belt pretensioner tube for damage. If damage is identified, the seat belt retractor will be replaced. There will be no charge to the owners for this action under this program.

 

OWNER NOTIFICATION

Owner notification is expected to occur on or before the week of September 16, 2022.

 

ACTION TO BE TAKEN

Check the Jaguar Land Rover Warranty Portal to make sure affected vehicles are correctly identified prior to starting this campaign. The Warranty Portal will be updated to reflect only those vehicles affected.

Retailers/authorized repairers are required to Quarantine affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale pending completion of the rework action. Affected vehicles already with customers should be updated at the next available opportunity. JLR North America recommends that affected sales demonstrator and loaner vehicles are repaired before use and that used vehicles are repaired before sale. Retailers/authorized repairers who choose to proceed against this recommendation, where legally permitted, must clearly and conspicuously disclose the open recall to the applicable customers.

A Safety Recall will be published when repair instructions are finalized, and any required parts have been procured.
Retailers/authorized repairers are reminded that they must not sell vehicles identified as affected by this campaign until such time as the repair has been successfully completed.

After the Safety Recall is launched, visit the British Brands Sales Suite (BBSS) website for a list of affected vehicles at your retailer/authorized repairer.


Chronology :

Following a notification from Autoliv that a defect had been identified during their manufacturing process that caused damage to a small number of front seat belt pretentioner tubes, Jaguar Land Rover (JLR) opened a PSCC (Product Safety & Compliance Committee) investigation on May 25, 2022. The PSCC requested that Vehicle Assembly Plants conduct an exercise to identify if they had received any parts from the batches Autoliv deemed at risk and the population of affected vehicles that may have received parts from these batches. On June 1, 2022, Autoliv presented the issue to the PSCC, Autoliv explained the issue that had been identified on one of their seatbelt production lines and the potential impact on the component functionality. During June, each vehicle assembly plant conducted detailed research to identify which batches deemed at risk by Autoliv had been consumed and the specific vehicle identification numbers of vehicles that may have received parts from these batches. In July, the qualification/identification of damaged parts was confirmed, and the subject matter experts within JLR confirmed the impact of damaged pretentioners on the Supplementary Restraints System (SRS) and on occupant protection. At the PSCC of July 13, 2022, the scope was discussed along with exposure and vehicle disposition confirmed. Based on the feedback provided, the PSCC progressed the issue to the Recall Determination Committee (RDC) for review. The RDC reviewed the issue on July 14, 2022, and concluded that it represented an unreasonable risk to safety and a voluntary safety recall should be conducted to inspect the pretensioner on all vehicles identified to be at risk of receiving a damaged pretensioner, and if a damaged component is identified, the seatbelt assembly should be replaced. There are no warranty claims, field or service reports, or other information (such as the numbers of deaths and/or injuries), associated with this recall.

 


3 Affected Products

Vehicles

MAKEMODELYEAR
JAGUARF-PACE2022
JAGUARF-TYPE2022
JAGUARXF2022

 


15 Associated Documents

Recall 573 Report – July 22, 2022

RCLRPT-22V524-7687.PDF 220.016KB

 


Recall Acknowledgement

RCAK-22V524-4876.pdf 645.497KB

 


Recall 573 Report

RCLRPT-22V524-3036.PDF 219.984KB

 


Recall 573 Report – July 22, 2022

RCLRPT-22V524-3302.PDF 220.016KB

 


Recall 573 Report – August 3, 2022

RCLRPT-22V524-3634.PDF 220.158KB

 


Presentation Slide

RMISC-22V524-2287.pdf 81.024KB

 


Manufacturer Notices(to Dealers,etc)

RCMN-22V524-0524.pdf 86.376KB

 


Presentation Slide

RMISC-22V524-6643.pdf 395.148KB

 


Remedy Instructions and TSB

RCRIT-22V524-0663.pdf 2359.695KB

 


SAFETY RECALL N720 H412 – Autoliv Seat belt Retractor Functionality

RMISC-22V524-1433.pdf 82.391KB

 


ISSUED Owner Notification Letter(Part 577)

RCONL-22V524-9546.pdf 275.162KB

 


Remedy Instructions and TSB

RCRIT-22V524-0206.pdf 2226.515KB

 


Recall Quarterly Report #1, 2022-3

RCLQRT-22V524-9293.PDF 211.147KB

 


Recall Quarterly Report #2, 2022-4

RCLQRT-22V524-0311.PDF 211.252KB

 


Recall Quarterly Report #3, 2023-1

RCLQRT-22V524-4562.PDF 211.333KB

 


Latest Recalls Documents

 


 

SaleBestseller No. 1
FOXWELL Car Scanner NT604 Elite OBD2 Scanner ABS SRS Transmission
  • [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
  • [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note:The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
  • [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
  • [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
  • [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
SaleBestseller No. 2
OBDMATE OBD2 Scanner with ABS SRS Transmission Diagnostic Tool
  • 【Reset ABS/SRS/Transmission/Engine Lights】 More than an check engine code reader, OBDMATE OM901 obd2 scanner performs comprehensive diagnostics for the 4 most-used systems (ABS/SRS/Engine/Transmission). It quickly clears fault codes, turns off warning lights, read data stream and auto VIN.
  • 【3.5" Handheld Scanner with 4 System Diagnose】 3.5" Super large TFT screen equipped displays an intuitive menu and clear readings of various sensors from ABS, SRS, ECM and TCM systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required.
  • 【One-Click I/M Readines&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether various emissions-related systems on the vehicle are operating properly. Help you get smog-check ready quickly. OM901 car scanner supports all essential OBD2 functions you need: read & clear codes, view freeze frame, read I/M readiness, retrieve VIN, live data stream (with graphing display), O2 sensor test, onboard monitoring mode, and EVAP leak test.
  • 【Battery Voltage Check&DLC Pin Test】 It allows you to monitor battery health by testing current battery voltage. Plus, this obd2 diagnostic tool features DLC 16-PIN test to check current voltage of every pin.
  • 【Automotive Scanner Diagnostic Kit】 The package comes with 1 car scanner, 1 USB-type c cable, 1 hard storage bag and 1 user manual(en). Free to update without any hidden fees. 5 languanges available in setting including English, French, Italian, German and Espanish. Valuable and Portable, making it a great tool kit for car owners, DIY enthusiasts, and professional mechanics.
Bestseller No. 3
BlueDriver OBD2 Scanner Bluetooth, No Subscription, ABS SRS TPMS
  • [Diagnose Like a Pro] BlueDriver Pro is a professional OBD2 scanner and diagnostic tool that helps you scan, understand, and clear vehicle trouble codes with confidence. Turn your phone into a powerful car diagnostic scanner—no guesswork, no unnecessary repairs.
  • [Read and Clear More Codes Than Ever] Read and clear more codes than basic car code readers. Access enhanced diagnostics for Check Engine, ABS, SRS, Airbag, TPMS, Transmission.
  • [Verified Fixes and Real-Time Data] Get unlimited, technician-verified repair reports matched to your VIN, with definitions, causes, and confirmed fixes. Monitor live vehicle data as you drive, view freeze frames, check smog readiness, and analyze Mode 6 test results.
  • [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
  • [Broad Make & Model Coverage] Strong support for GM, Ford, Stellantis (RAM, Jeep, Chrysler), Toyota, Honda, Nissan, Mazda, Subaru, Hyundai, Mercedes-Benz, BMW, and VW.
Bestseller No. 4
Outzone B800 BMW SRS Airbag Reset Tool | OBDII Scanner Read & Clear Fault Codes | Fits E36/E46/E34/E38/E39/Z3/X5 (1994-2003) โ€“ Except 2001 330i
148 Reviews
Outzone B800 BMW SRS Airbag Reset Tool | OBDII Scanner Read & Clear Fault Codes | Fits E36/E46/E34/E38/E39/Z3/X5 (1994-2003) – Except 2001 330i
  • ✔️【Professional SRS Reset for 1994-2003 BMW】 Designed specifically for classic BMW models (1994-2003). This B800 scanner reads & clears SRS airbag fault codes, turns off the warning light, and saves you a costly dealer visit. Confirmed compatible with: E36, E46 (EXCEPT 2001 330i), E34, E38, E39, Z3, and X5 (E53). NOT compatible with any BMW built before 1994 or after 2003.
  • ✔️【Important: Two Different Connection Ports – Read Before Use】 To avoid “not working” issues, please note: For 1994–2000 BMWs (most E36, E34, Z3, early E39), the SRS diagnostic port is a round 20-pin connector under the hood. You MUST use the included 16-pin to 20-pin adapter cable. For 2000–2003 models (late E46, E39, X5), use the standard OBD-II port inside the cabin. Incorrect connection is the #1 reason for “incompatibility” reports.
  • ✔️【Read & Clear Fault Codes in Minutes】 Quickly diagnose why your SRS light is on. The scanner accurately reads fault codes from airbag and seatbelt pretensioner systems. With one button press, clear the codes and reset the SRS warning light in seconds. No expensive dealer tools needed.
  • ✔️【User-Friendly for DIYers – No Mechanic Required】 Easy operation with an intuitive button layout: ‘Enter’ to confirm, ‘Scroll’ to navigate. The clear LCD screen shows results instantly. Includes a step-by-step manual (revised for clarity) to guide you through the entire reset process.
  • ✔️【Reliable Support with 1-Year Warranty】 We stand behind the quality of our B800 scanner. It comes with a 1-Year Hassle-Free Warranty. If you have any questions or need support, please contact us with your Order ID, and our dedicated team will assist you promptly.
SaleBestseller No. 5
BLCKTEC 460T OBD2 Scanner Car Code Reader Engine ABS SRS Transmission Diagnostic Tool, 12 Reset Services, Oil/TPMS/EPB/BMS/SAS/DPF/Throttle Reset, ABS Bleeding, Battery Test, Auto VIN, Free Update
  • [All System Diagnostics, Professional-Level Scanner] - BLCKTEC 460T is the ultimate OBD2 diagnostic tool for home mechanics and professionals. It supports all 10 OBD2 modes, reads and clears Engine/Transmission/ABS/SRS codes, performs All-System Diagnostics, offers workshop reset tools, and provides real-time live data. It helps you pinpoint issues, assess your car's condition, and prepare for SMOG checks with ease. NOTE: Function availability depends on your vehicle. Before you buy, be sure to use the Compatibility Checker on BLCKTEC website or contact our customer support to verify that the features you need are supported for your vehicle’s specific year, make, and model.
  • [12+ Most Popular Reset Functions] - BLCKTEC 460T OBD2 scanner offers 12+ dealer-level service functions, including Oil Maintenance Reset, ABS Bleeding, EPB Reset, SAS(Steering Angle Sensor) Recalibration, DPF(Diesel Particulate Filter) Reset, Throttle Body Relearn, Battery Reset/Initialization, TPMS Relearn, Transmission Reset, Fluid Change Reset, Maintenance Reset and more, enabling you to perform workshop services like a pro. NOTE: Function availability depends on your vehicle. Be sure to use the Compatibility Checker on BLCKTEC website to verify that the features you need are supported for your vehicle.
  • [Real-Time OBD2 and OEM Live Data, Freeze Frame Data] - BLCKTEC 460T helps diagnose vehicle issues when warning lights like Check Engine Light or ABS/SRS Light appear. It offers detailed DTC info, ECU Freeze Frame Data, and real-time OBD2 and advanced OEM live data, including Engine, Transmission, ABS, SRS, and more, making it easy to diagnose and resolve vehicle problems. You can view, graph, record, replay, and overlay up to four live data streams in a single graph for better analysis.
  • [AutoVIN, AutoReLink, AutoScan, 3X Faster] - Equipped with AutoVIN technology, 460T automatically retrieves the VIN to save you time. Its AutoScan and AutoReLink features scan all of the vehicle's ECUs and detect any fault codes immediately after you plug the scanner into the vehicle's OBD2 port - no button presses required. Additionally, it regathers DTC and I/M readiness information every 30 seconds, simplifying monitor tests. 460T's advanced technology makes it 3X faster than other products.
  • [Get RepairSolutions2, the #1 Auto Repair App for Free] - When paired with RepairSolutions2(RS2) App, 460T becomes even more powerful. RS2's Verified Fix Database built by master technicians, provides the parts needed for the repair. Additionally, RS2 gives you access to OEM warranty info, maintenance schedules, TSB, and dealership recall info, making car care easier than ever. RS2 is free with no subscription fees and it stores your car scan reports in the cloud, allowing you to access, share, or print them anytime and anywhere.

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...