N685 – Front Impact Sensor Torque Check – 2022 Land Rover Range Rover

May 10, 2022 NHTSA CAMPAIGN NUMBER: 22V320000

Front Crash Sensors May Malfunction

A malfunctioning front crash sensor may impact air bag deployment during a crash or cause unintentional front air bag deployment while driving, increasing the risk of a crash.

 

NHTSA Campaign Number: 22V320

Manufacturer Jaguar Land Rover North America, LLC

Components AIR BAGS

Potential Number of Units Affected 19

 

Summary

Jaguar Land Rover North America, LLC (Land Rover) is recalling certain 2022 New Range Rover vehicles. Due to improperly tightened fasteners, the front crash sensors may become loose and malfunction.

 

Remedy

Dealers will tighten the front crash sensor fasteners, free of charge. Owner notification letters were mailed June 30, 2022. Owners may contact Land Rover customer service at 1-800-637-6837. Land Rover’s number for this recall is N685.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Front Impact Sensor Torque Check

Publication No.: N685
Model: Range Rover (LK)
Model Year: 2022
Date of Issue: 20 May 2022

 

DESCRIPTION OF ISSUE AND THE EFFECT ON VEHICLE OPERATION

2022 model year New Range Rover vehicles

A potential concern has been identified on specific vehicles within the above vehicle range.

A concern has been identified on certain 2022 model year New Range Rover vehicles where the front crash sensor fixings may not have been installed to the specified level of torque. There is a risk that the front crash sensors may become loose resulting in incorrect operation of the active restraints system. This could lead to increased occupant injury or, in the case of inadvertent frontal airbag deployment, loss of vehicle control increasing the risk of a crash.

 

REGULATORY INFORMATION

JLR North America, LLC have informed the National Highway Traffic Safety Administration (NHTSA) of their intent to perform a Safety Recall on certain 2022 model year New Range Rover vehicles imported into the United States. Information relating to this Safety Recall will be posted on the NHTSA website. United States Federal regulations require that retailers/authorized repairers must be notified within a reasonable time after the manufacturer decides that a defect that relates to motor vehicle safety or a noncompliance exists. United States Federal Law requires retailers/authorized repairers to complete any outstanding Safety Recall before a new vehicle is delivered to the buyer or lessee. Violation of this requirement by a retailer/authorized repairer could result in a maximum civil penalty of up to $22,992.00 USD per violation and up to $114,954,525.00 USD for a related series of violations. This Safety Recall serves as notification to all retailers/authorized repairers in the United States and Federalized Territories that any affected new vehicles may not be sold and delivered for customer use until the Safety Recall is completed.

JLR North America, LLC recommends that affected sales demonstrator and loaner vehicles are repaired before use, and that used vehicles are repaired before sale. Retailers/authorized repairers who choose to proceed against this recommendation, where legally permitted, must clearly and conspicuously disclose the open Safety Recall notice to the applicable customers.

This Safety Recall notice serves as notification to all JLR retailers/authorized repairers that any affected new vehicles may not be sold and delivered for customer use until the Safety Recall repair is completed.

 

ACTION TO BE TAKEN

JLR has taken the decision to recall affected vehicles to repair the vehicle.

Visit the British Brands Sales Suite (BBSS) website for a list of affected vehicles at your retailer/authorized repairer.

Following procedures appropriate to your market and as required by local legislation, owners of affected vehicles should be contacted requesting that the owner contact their nearest retailer/authorized repairer as soon as possible to arrange for the repair to be completed. The National Sales Companies (NSCs), Importer, Regional Office or Government agency will contact the customers. If you have any questions about this process, please contact your NSC/Importer or Regional Office for more information.

An owner may indicate that a repair has already been completed for this concern, in which case the full cost of the repair should be reimbursed. Refer to the warranty section of this Safety Recall for details of the reimbursement process. At the time of confirming a booking for a vehicle repair, make sure you check the JLR claims submission system and that all other outstanding campaigns are identified to make sure the correct parts are available and adequate workshop time is allocated for repairs to be completed in one visit.

 


A concern has been identified on certain 2022 model year New Range Rover vehicles where the front crash sensor fixings may not have been installed to the specified level of torque. There is a risk that the front crash sensors may become loose resulting in incorrect operation of the supplementary restraints system.

 

Question 1

Who do I contact if a member of the press contacts me about this recall?

Answer

Make sure that any press enquiries are referred to the Jaguar Land Rover (JLR) Corporate Affairs office.

 

Question 2

Why is JLR Limited recalling these vehicles?

Answer

Should the crash sensors be incorrectly installed where the fixings are not torqued to the specification required, they may become loose resulting in incorrect operation of the active restraints system. This could lead to increased occupant injury or, in the case of inadvertent frontal airbag deployment, loss of vehicle control increasing the risk of a crash.

 

Question 3

Can you tell me more about what is wrong with the vehicles?

Answer

The investigation conducted revealed a manual error was made during the assembly of some vehicles where the fixings were only partially fixed (by hand only) and the manufacturing operation was not completed. The error was found to be human error.

 

Question 4

How would the customer become aware of their vehicle potentially having this concern?

Answer

It is unlikely there will be any indication of a problem.

 

Question 5

Does this concern affect vehicle safety?

Answer

Yes. This could lead to increased occupant injury or, in the case of inadvertent frontal airbag deployment, loss of vehicle control increasing the risk of a crash.

 

Question 6

Has JLR received many complaints?

Answer

No. This matter was found through internal vehicle quality assessments.

 

Question 7

Have there been any accidents or injuries or fires?

Answer

There are no accidents, injuries or fires known to be related to this issue.

 

Question 8

How was the concern discovered?

Answer

Part of the routine vehicle inspections completed as part of new model introduction found this issue.

 

Question 9

How long has JLR known about this concern?

Answer

The issue was recognized on 5th April 2022.

 

Question 10

Is the defect leading you to any concerns regarding the reliability of a system, which is supposed to be designed and engineered for the passengers’ safety? What type of measures are you planning to take?

Answer

JLR has no concerns with the overall reliability of the vehicle. JLR carefully monitors field data to make sure that any matters relating to safety and compliance are rigorously investigated.

 

Question 11

What has JLR done in production?

Answer

The production processes involved have been reviewed to make sure that these fixings are installed correctly.

 

Question 12

What will retailer/authorized repairers do to the vehicles?

Answer

Owners will be notified and instructed to take their vehicle to a Land Rover approved retailer/repairer, who will make sure that the fixings are correctly torqued. There will be no charge to owners for this repair.

 

Question 13

Which vehicles are affected by this recall?

Answer

New Range Rover 2022 model year

Manufactured from February 2nd 2022 to February 22nd 2022.

 

Question 14

Are other JLR models affected by this concern?

Answer

No, no other vehicles are affected by this concern.

 

Question 15

Is the repair available to rework vehicles?

Answer

 

Yes.

 

Question 16

How much will the recall cost JLR?

Answer

Cost was not a factor in deciding to recall these vehicles.

 

Question 17

How do I know if my vehicle is affected?

Answer

Where possible, owners of potentially affected vehicles will shortly receive a letter inviting them to contact a retailer/authorized repairer for the work to be completed.

 

Question 18

How long does it take for the vehicle to be repaired?

Answer

The work will be completed as quickly and efficiently as possible in order to minimize inconvenience to customers. The actual repair takes approximately 18 minutes.

 

Question 19

Can I safely continue to drive my vehicle until it has been repaired?

Answer

Customers are advised to contact a retailer/authorized repairer should they have any concerns regarding their vehicles.

Note:

Please make sure that any press enquiries are referred to the JLR Corporate Affairs office.

 


Chronology :

Following a new model introduction “Fresh Eyes” review in early April 2022, the inspected vehicle was found to have both front crash sensor fasteners incorrectly installed. A plant wide investigation was instigated and culminated in a Stop Shipment issued on April 5, 2022. Further assessment of vehicle disposition revealed that there was a possibility of vehicles being affected beyond the control of the plant. Jaguar Land Rover opened a Product Safety and Compliance Committee (PSCC) investigation that was reviewed at the PSCC meeting on April 20, 2022.

The plant based teams were assigned responsibility for the investigation and were tasked to define the scope of this issue, determine if the condition found has any special causes and report the status to the PSCC. They reported their initial findings to the PSCC on April 27, 2022.

At the PSCC of April 27, 2022, the scope was discussed along with exposure and vehicle disposition confirmed.
Based on the feedback provided, the PSCC progressed the issue to the Recall Determination Committee (RDC) for review.

The RDC reviewed the issue on May 3, 2022 and concluded that it represented an unreasonable risk to safety and a voluntarily safety recall should be conducted.

There have been no reported accidents, injuries or fires as a result of this concern.

 


1 Affected Product

Vehicle

MAKEMODELYEAR
LAND ROVERNEW RANGE ROVER2022

 


9 Associated Documents

Defect Notice 573 Report

RCLRPT-22V320-3998.PDF 214.394KB

 


Recall Acknowledgement

RCAK-22V320-5576.pdf 733.616KB

 


Remedy Instructions and TSB

RCRIT-22V320-6843.pdf 375.519KB

 


Campaign Launch Status

RMISC-22V320-5433.pdf 222.065KB

 


CAMPAIGN LAUNCH STATUS

RMISC-22V320-8712.pdf 71.357KB

 


ISSUED Owner Notification Letter(Part 577)

RCONL-22V320-7887.pdf 351.198KB

 


Recall Quarterly Report #1, 2022-2

RCLQRT-22V320-1951.PDF 211.139KB

 


Recall Quarterly Report #2, 2022-3

RCLQRT-22V320-9426.PDF 211.241KB

 


Recall Quarterly Report #3, 2022-4

RCLQRT-22V320-5726.PDF 211.324KB

 


Latest Recalls Documents

 


 

SaleBestseller No. 1
FOXWELL Car Scanner NT604 Elite OBD2 Scanner ABS SRS Transmission
  • [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
  • [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note:The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
  • [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
  • [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
  • [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
SaleBestseller No. 2
OBDMATE OBD2 Scanner with ABS SRS Transmission Diagnostic Tool
  • 【Reset ABS/SRS/Transmission/Engine Lights】 More than an check engine code reader, OBDMATE OM901 obd2 scanner performs comprehensive diagnostics for the 4 most-used systems (ABS/SRS/Engine/Transmission). It quickly clears fault codes, turns off warning lights, read data stream and auto VIN.
  • 【3.5" Handheld Scanner with 4 System Diagnose】 3.5" Super large TFT screen equipped displays an intuitive menu and clear readings of various sensors from ABS, SRS, ECM and TCM systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required.
  • 【One-Click I/M Readines&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether various emissions-related systems on the vehicle are operating properly. Help you get smog-check ready quickly. OM901 car scanner supports all essential OBD2 functions you need: read & clear codes, view freeze frame, read I/M readiness, retrieve VIN, live data stream (with graphing display), O2 sensor test, onboard monitoring mode, and EVAP leak test.
  • 【Battery Voltage Check&DLC Pin Test】 It allows you to monitor battery health by testing current battery voltage. Plus, this obd2 diagnostic tool features DLC 16-PIN test to check current voltage of every pin.
  • 【Automotive Scanner Diagnostic Kit】 The package comes with 1 car scanner, 1 USB-type c cable, 1 hard storage bag and 1 user manual(en). Free to update without any hidden fees. 5 languanges available in setting including English, French, Italian, German and Espanish. Valuable and Portable, making it a great tool kit for car owners, DIY enthusiasts, and professional mechanics.
Bestseller No. 3
BlueDriver OBD2 Scanner Bluetooth, No Subscription, ABS SRS TPMS
  • [Diagnose Like a Pro] BlueDriver Pro is a professional OBD2 scanner and diagnostic tool that helps you scan, understand, and clear vehicle trouble codes with confidence. Turn your phone into a powerful car diagnostic scanner—no guesswork, no unnecessary repairs.
  • [Read and Clear More Codes Than Ever] Read and clear more codes than basic car code readers. Access enhanced diagnostics for Check Engine, ABS, SRS, Airbag, TPMS, Transmission.
  • [Verified Fixes and Real-Time Data] Get unlimited, technician-verified repair reports matched to your VIN, with definitions, causes, and confirmed fixes. Monitor live vehicle data as you drive, view freeze frames, check smog readiness, and analyze Mode 6 test results.
  • [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
  • [Broad Make & Model Coverage] Strong support for GM, Ford, Stellantis (RAM, Jeep, Chrysler), Toyota, Honda, Nissan, Mazda, Subaru, Hyundai, Mercedes-Benz, BMW, and VW.
Bestseller No. 4
Outzone B800 BMW SRS Airbag Reset Tool | OBDII Scanner Read & Clear Fault Codes | Fits E36/E46/E34/E38/E39/Z3/X5 (1994-2003) โ€“ Except 2001 330i
148 Reviews
Outzone B800 BMW SRS Airbag Reset Tool | OBDII Scanner Read & Clear Fault Codes | Fits E36/E46/E34/E38/E39/Z3/X5 (1994-2003) – Except 2001 330i
  • ✔️【Professional SRS Reset for 1994-2003 BMW】 Designed specifically for classic BMW models (1994-2003). This B800 scanner reads & clears SRS airbag fault codes, turns off the warning light, and saves you a costly dealer visit. Confirmed compatible with: E36, E46 (EXCEPT 2001 330i), E34, E38, E39, Z3, and X5 (E53). NOT compatible with any BMW built before 1994 or after 2003.
  • ✔️【Important: Two Different Connection Ports – Read Before Use】 To avoid “not working” issues, please note: For 1994–2000 BMWs (most E36, E34, Z3, early E39), the SRS diagnostic port is a round 20-pin connector under the hood. You MUST use the included 16-pin to 20-pin adapter cable. For 2000–2003 models (late E46, E39, X5), use the standard OBD-II port inside the cabin. Incorrect connection is the #1 reason for “incompatibility” reports.
  • ✔️【Read & Clear Fault Codes in Minutes】 Quickly diagnose why your SRS light is on. The scanner accurately reads fault codes from airbag and seatbelt pretensioner systems. With one button press, clear the codes and reset the SRS warning light in seconds. No expensive dealer tools needed.
  • ✔️【User-Friendly for DIYers – No Mechanic Required】 Easy operation with an intuitive button layout: ‘Enter’ to confirm, ‘Scroll’ to navigate. The clear LCD screen shows results instantly. Includes a step-by-step manual (revised for clarity) to guide you through the entire reset process.
  • ✔️【Reliable Support with 1-Year Warranty】 We stand behind the quality of our B800 scanner. It comes with a 1-Year Hassle-Free Warranty. If you have any questions or need support, please contact us with your Order ID, and our dedicated team will assist you promptly.
SaleBestseller No. 5
BLCKTEC 460T OBD2 Scanner Car Code Reader Engine ABS SRS Transmission Diagnostic Tool, 12 Reset Services, Oil/TPMS/EPB/BMS/SAS/DPF/Throttle Reset, ABS Bleeding, Battery Test, Auto VIN, Free Update
  • [All System Diagnostics, Professional-Level Scanner] - BLCKTEC 460T is the ultimate OBD2 diagnostic tool for home mechanics and professionals. It supports all 10 OBD2 modes, reads and clears Engine/Transmission/ABS/SRS codes, performs All-System Diagnostics, offers workshop reset tools, and provides real-time live data. It helps you pinpoint issues, assess your car's condition, and prepare for SMOG checks with ease. NOTE: Function availability depends on your vehicle. Before you buy, be sure to use the Compatibility Checker on BLCKTEC website or contact our customer support to verify that the features you need are supported for your vehicle’s specific year, make, and model.
  • [12+ Most Popular Reset Functions] - BLCKTEC 460T OBD2 scanner offers 12+ dealer-level service functions, including Oil Maintenance Reset, ABS Bleeding, EPB Reset, SAS(Steering Angle Sensor) Recalibration, DPF(Diesel Particulate Filter) Reset, Throttle Body Relearn, Battery Reset/Initialization, TPMS Relearn, Transmission Reset, Fluid Change Reset, Maintenance Reset and more, enabling you to perform workshop services like a pro. NOTE: Function availability depends on your vehicle. Be sure to use the Compatibility Checker on BLCKTEC website to verify that the features you need are supported for your vehicle.
  • [Real-Time OBD2 and OEM Live Data, Freeze Frame Data] - BLCKTEC 460T helps diagnose vehicle issues when warning lights like Check Engine Light or ABS/SRS Light appear. It offers detailed DTC info, ECU Freeze Frame Data, and real-time OBD2 and advanced OEM live data, including Engine, Transmission, ABS, SRS, and more, making it easy to diagnose and resolve vehicle problems. You can view, graph, record, replay, and overlay up to four live data streams in a single graph for better analysis.
  • [AutoVIN, AutoReLink, AutoScan, 3X Faster] - Equipped with AutoVIN technology, 460T automatically retrieves the VIN to save you time. Its AutoScan and AutoReLink features scan all of the vehicle's ECUs and detect any fault codes immediately after you plug the scanner into the vehicle's OBD2 port - no button presses required. Additionally, it regathers DTC and I/M readiness information every 30 seconds, simplifying monitor tests. 460T's advanced technology makes it 3X faster than other products.
  • [Get RepairSolutions2, the #1 Auto Repair App for Free] - When paired with RepairSolutions2(RS2) App, 460T becomes even more powerful. RS2's Verified Fix Database built by master technicians, provides the parts needed for the repair. Additionally, RS2 gives you access to OEM warranty info, maintenance schedules, TSB, and dealership recall info, making car care easier than ever. RS2 is free with no subscription fees and it stores your car scan reports in the cloud, allowing you to access, share, or print them anytime and anywhere.

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...