Recall N664 – SRS Warning Light Malfunction – 2020 Land Rover Range Rover Evoque

February 15, 2022 NHTSA CAMPAIGN NUMBER: 22V080000

SRS Warning Light Malfunction

An SRS system warning light that falsely illuminates could prevent the detection of an actual air bag system failure, increasing the risk of injury in the event of a crash.

 

NHTSA Campaign Number: 22V080

Manufacturer Jaguar Land Rover North America, LLC

Components AIR BAGS

Potential Number of Units Affected 18,824

 

Summary

Jaguar Land Rover North America, LLC (Land Rover) is recalling certain 2020 Range Rover Evoque vehicles. The supplemental restraint system (SRS) warning light software is programmed incorrectly, which may cause the warning light to malfunction and intermittently illuminate.

 

Remedy

Dealers will update the restraints control module (RCM) software, free of charge. Owner notification letters were mailed March 23, 2022. Owners may contact Land Rover customer service at 1-800-637-6837. Land Rover’s number for this recall is N664.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 

Check if your Land Rover has a Recall

 


DESCRIPTION OF DEFECT AND THE EFFECT ON VEHICLE OPERATION

A potential concern has been identified on specific vehicles within the above vehicle range.

Certain 2020 model year Range Rover Evoque vehicles may experience an intermittent Supplementary Restraint System (SRS) warning lamp being displayed on the instrument panel cluster. The SRS is still fully operational as expected, however vehicles displaying the SRS warning lamp may not properly warn the driver of an actual system fault which may increase the risk of serious injury in the event of an accident of sufficient severity necessitating driver airbag deployment.

 

REGULATORY INFORMATION

JLR North America, LLC and JLR Canada ULC have informed the National Highway Traffic Safety Administration (NHTSA) and Transport Canada (TC) of their intent to perform a Safety Recall on certain 2020 model year Range Rover Evoque vehicles imported into the United States and Canadian markets. Information relating to this Safety Recall will be posted on the NHTSA and TC websites. United States Federal regulations require that retailers/authorized repairers must be notified within a reasonable time after the manufacturer decides that a defect that relates to motor vehicle safety or a non-compliance exists. United States Federal Law requires retailers/authorized repairers to complete any outstanding Safety Recall before a new vehicle is delivered to the buyer or lessee. Violation of this requirement by a retailer/authorized repairer could result in a maximum civil penalty of up to the equivalent of $22,992.00 USD per violation and the equivalent of $114,954,525.00 USD for a related series of violations. This Safety Recall serves as notification to all retailers/authorized repairers in the United States and Federalized Territories and Canada that any affected new vehicles may not be sold and delivered for customer use until the Safety Recall repair is completed.

JLR North America, LLC / JLR Canada ULC recommends that affected sales demonstrator and loaner vehicles are repaired before use, and that used vehicles are repaired before sale. Retailers/authorized repairers who choose to proceed against this recommendation, where legally permitted, must clearly and conspicuously disclose the open Safety Recall notice to the applicable customers.

This Safety Recall notice serves as notification to all JLR retailers/authorized repairers that any affected new vehicles may not be sold and delivered for customer use until the Safety Recall repair is completed.

 

ACTION TO BE TAKEN

JLR has taken the decision to recall affected vehicles to repair the vehicle

Visit the British Brands Sales Suite (BBSS) website for a list of affected vehicles at your retailer/authorized repairer.

Following procedures appropriate to your market and as required by local legislation, owners of affected vehicles should be contacted requesting that the owner contact their nearest retailer/authorized repairer as soon as possible to arrange for the repair to be completed. The National Sales Company (NSC), Importer, Regional Office or Government agency will contact the customers. If you have any questions about this process, please contact your NSC/Importer or Regional Office for more information.

Check the JLR claims submission system to make sure affected vehicles are correctly identified prior to starting this campaign. The claims submission system will be updated to reflect only those vehicles affected.

For information purposes, a Technical Question and Answer document is attached.

 

DIAGNOSTIC INSTRUCTION

Service instruction

1. CAUTIONS:

This procedure requires a minimum of Pathfinder 367 installed or later.

All ignition ON/OFF instructions must be followed. Failure to complete these instructions may cause damage to the vehicle control modules.

NOTE: The JLR approved diagnostic equipment will read the Vehicle Identification Number (VIN) for the vehicle and automatically take the vehicle out of ‘Transportation Mode’ if required.

Connect the JLR approved battery support unit.

2. Connect the JLR approved diagnostic equipment to the vehicle and begin a new session.

3. Follow the JLR approved diagnostic equipment prompts.

Select ‘ECU Diagnostics’.

Select ‘Restraints Control Module [RCM]’.

Select ‘Update ECU’.

Follow all on-screen instructions to complete the task.

4. If required, reset the vehicle to ‘Transportation Mode’.

5. When all of the tasks are complete, exit the session.

6. Disconnect the JLR approved diagnostic equipment and the JLR approved battery support unit.

 


SAFETY RELATED RECALL – Range Rover Evoque – Supplementary Restraint System Warning Lamp Illuminated

Dear

Jaguar Land Rover Limited would like to advise you that during ongoing quality assessment of our product it has been identified that a possible safety related problem may occur on certain 2020 model year Range Rover Evoque vehicles within a specific production range.

Please read the information below, this will explain the actions that we intend to take and what you will need to do.

 

Why are we contacting you?

Certain vehicles may experience an intermittent Supplementary Restraint System warning light being displayed on the instrument panel cluster. The Supplementary Restraint System is still fully operational as expected, however vehicles displaying the Supplementary Restraint System warning light may not properly warn the driver of an actual system fault.

 

What will your Land Rover retailer/authorized repairer do?

We will install the latest software to the Restraints Control Module.

 

How long will it take?

The work on your vehicle will be completed as quickly and efficiently as possible in order to minimize inconvenience to you. Your retailer/authorized repairer will be able to advise how long your vehicle will be required for when a booking is made.

 

What we are asking you to do

Please contact your preferred Land Rover retailer/authorized repairer without delay. To book your vehicle in for this action you will need to provide the retailer/authorized repairer with the following which are detailed at the beginning of this letter:

  • The VIN for your vehicle
  • Vehicle registration number of your vehicle.
  • The program code for the action (N664).

If you do not have a retailer/authorized repairer, please access www.landrover.co.uk or www.landrover.com for contact details.

If you no longer own the vehicle could you please complete the ‘Change of Ownership’ slip attached to this letter, returning the slip to Jaguar Land Rover Limited immediately in the enclosed ‘Freepost’ envelope. This will enable us to make contact with the new owner.

 

If you have concerns

If you experience any concerns relating to this Recall, contact the Service Manager at the retailer/authorized repairer for assistance or contact the JLR Limited Customer Experience Centre on 0345 303 2303 or (enter phone number).

This bulletin is being issued in accordance with the legislative or industry requirements concerning vehicle defects. The authorities will closely monitor the response rate of this bulletin.

Please treat this matter with the urgency it requires, JLR Limited apologize for any inconvenience this bulletin may cause and thank you, in advance, for your co-operation.

Yours sincerely

Head of Business

 

A concern has been identified with the warning system of the Supplementary Restraint System (SRS) on 2020 model year Range Rover Evoque vehicles where the diagnostic check for the driver airbag is overly sensitive due to an incorrect diagnostic parameter for the driver airbag. In this condition the SRS may illuminate falsely indicating the present of an issue.

Please make sure that any press enquiries are referred to the Jaguar Land Rover (JLR) Corporate Affairs office.

 

Question 1

Who do I contact if a member of the press contacts me about this recall?

 

Answer

Make sure that any press enquiries are referred to the JLR Corporate Affairs office.

 

Question 2

Why is JLR Limited recalling these vehicles?

 

Answer

In USA and Canada, where intermittent SRS warning lamp illumination occurs, the condition is considered to be a safety defect.

 

Question 3

Can you tell me more about what is wrong with the vehicles?

 

Answer

An investigation identified that the diagnostic check for the SRS is overly sensitive when checking the driver airbag circuit due to an incorrect diagnostic parameter. Vehicles with this condition may experience intermittent airbag system SRS warning lamp illumination although the driver airbag will correctly operate with the known error state present.

 

Question 4

How would the customer become aware of their vehicle potentially hag this concern?

 

Answer

Customers would notice the SRS warning lamp illuminating in the instrument panel cluster.

 

Question 5

Does this concern affect vehicle safety?

 

Answer

Yes. In the USA and Canada, where intermittent SRS warning lamp illumination occurs, the condition is considered to be a safety defect

 

Question 6

Has JLR received many complaints?

 

Answer

Yes, JLR has received a number of complaints.

 

Question 7

Have there been any accidents or injuries or fires?

 

Answer

There are no accidents, injuries or fires known to be related to this issue.

 

Question 8

How was the concern discovered?

 

Answer

Investigation was initiated following field reports and warranty claims concerning the SRS warning lamp illumination.

 

Question 9

How long has JLR known about this concern?

 

Answer

Investigation started on 28th May 2021.

 

Question 10

Is the defect leading you to any concerns regarding the reliability of a system, which is supposed to be designed and engineered for the passengers’ safety? What type of measures are you planning to take?

 

Answer

JLR has no concerns with the overall reliability of the vehicle. JLR carefully monitors field data to make sure that any matters relating to safety and compliance are rigorously investigated.

 

Question 11

What has JLR done in production?

 

Answer

Production vehicles are manufactured with a revised SRS warning lamp diagnostic parameter.

 

Question 12

What will retailer/authorized repairers do to the vehicles?

 

Answer

Owners will be notified and instructed to take their vehicle to an approved Land Rover retailer who will update the RCM software by a wired update to a level with the specified system resistance value threshold for the driver airbag circuit.

There will be no charge to owners for this repair.

 

Question 13

Which vehicles are affected by this recall?

 

Answer

Certain 2020 model year Range Rover Evoque vehicles.

Production Dates: November 2, 2018 to November 12, 2020.

 

Question 14

Are other JLR models affected by this concern?

 

Answer

No.

 

Question 15

Is the repair available to rework vehicles?

 

Answer

Yes.

 

Question 16

How much will the recall cost JLR?

 

Answer

Cost was not a factor in deciding to recall these vehicles.

 

Question 17

How long does it take for the vehicle to be repaired?

 

Answer

The work will be completed as quickly and efficiently as possible in order to minimize inconvenience to customers. The actual repair takes approximately 15 Minutes.

 

Question 18

Can I safely continue to drive my vehicle until it has been repaired?

 

Answer

Customers are advised to contact a retailer/authorized repairer should they have any concerns regarding their vehicles.

Note:

Please make sure that any press enquiries are referred to the JLR Corporate Affairs office.

 


573.6 (c) (6) – Chronology of Events (Recall N664) [Updated]

A Product Safety and Compliance Committee (PSCC) Investigation was opened in late May, 2021, following receipt of a number of dealer field reports. The PSCC directed an engineering team to investigate the issue to discover the possible causes along with the scope of any issues found.

Throughout June and July, 2021, the engineering team updated the PSCC with results and findings of its investigation. The investigation team initiated investigations into multiple potential causes. The engineering team also engaged the restraints control module supplier to aid the investigation including returned parts analysis.

In August, 2021, the engineering team reported to the PSCC one of its initial findings showed the system resistance value that triggers the SRS warning lamp may be away from the specified design condition for the driver airbag circuit. The PSCC directed the engineering team investigate which RCM (Restraints Control Module) calibrations contained this out of specification condition and how the SRS would operate under these conditions.

At the end of October, 2021, the engineering team reported to the PSCC its findings and advised the issue would only result in an illumination of the airbag warning light on the instrument cluster. The PSCC directed the team to validate the scope of vehicles which contained these incorrect RCM calibrations.

In December, 2021, the engineering team confirmed to the PSCC which RCM calibrations were affected by the incorrect specification. The PSCC directed the team to determine the scope of affected vehicles.

On January 19, 2022, the PSCC received the scope of affected vehicles. The PSCC concluded the issue should be progressed to the Jaguar Land Rover Recall Determination Committee (RDC).

The RDC reviewed all information and the scope of affected vehicles on February 8, 2022, and the committee determined that even though, in the out of specification condition with the SRS warning lamp is illuminated, the driver airbag would operate correctly, due to the system being part of a safety system, in line with market precedent, the issue necessitated a remedy by means of a safety recall in the USA and Canada.

There have been no reported accidents, injuries or fires as a result of this concern.

Jaguar Land Rover used 153 Warranty Claims, Field Reports, and Customer complaints from

August 5, 2019, to January 24, 2022, in determining the nature of the issue.

 


1 Affected Product

Vehicle

MAKEMODELYEAR
LAND ROVERRANGE ROVER EVOQUE2020

 


14 Associated Documents

Chronology of Events – Recall N664

RMISC-22V080-8506.pdf 59.654KB

 


Defect Notice 573 Report

RCLRPT-22V080-3861.PDF 213.726KB

 


Recall Acknowledgement

RCAK-22V080-3087.pdf 645.571KB

 


573.6 (c) (6) – Chronology of Events (Recall N664) [Updated]

RMISC-22V080-6260.pdf 60.487KB

 


Recall 573 Report – February 28, 2022

RCLRPT-22V080-6139.PDF 213.73KB

 


Manufacturer Notices(to Dealers,etc)

RCMN-22V080-1998.pdf 312.97KB

 


N664 – SAFETY RECALL – SRS WARNING LAMP

RMISC-22V080-9964.pdf 73.657KB

 


SAFETY RECALL N664 – 20MY RR EVOQUE SRS WARNING LAMP ILLUMINATION

RMISC-22V080-1632.pdf 53.058KB

 


ISSUED Owner Notification Letter(Part 577)

RCONL-22V080-1605.pdf 288.337KB

 


Recall Quarterly Report #1, 2022-1

RCLQRT-22V080-1340.PDF 211.145KB

 


Remedy Instructions and TSB

RCRIT-22V080-2452.pdf 396.39KB

 


Recall Quarterly Report #2, 2022-2

RCLQRT-22V080-1101.PDF 211.248KB

 


Recall Quarterly Report #3, 2022-3

RCLQRT-22V080-0747.PDF 211.335KB

 


Recall Quarterly Report #4, 2022-4

RCLQRT-22V080-5466.PDF 211.451KB

 


Latest Recalls Documents

 


 

SaleBestseller No. 1
FOXWELL Car Scanner NT604 Elite OBD2 Scanner ABS SRS Transmission
  • [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
  • [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note:The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
  • [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
  • [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
  • [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
SaleBestseller No. 2
OBDMATE OBD2 Scanner with ABS SRS Transmission Diagnostic Tool
  • 【Reset ABS/SRS/Transmission/Engine Lights】 More than an check engine code reader, OBDMATE OM901 obd2 scanner performs comprehensive diagnostics for the 4 most-used systems (ABS/SRS/Engine/Transmission). It quickly clears fault codes, turns off warning lights, read data stream and auto VIN.
  • 【3.5" Handheld Scanner with 4 System Diagnose】 3.5" Super large TFT screen equipped displays an intuitive menu and clear readings of various sensors from ABS, SRS, ECM and TCM systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required.
  • 【One-Click I/M Readines&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether various emissions-related systems on the vehicle are operating properly. Help you get smog-check ready quickly. OM901 car scanner supports all essential OBD2 functions you need: read & clear codes, view freeze frame, read I/M readiness, retrieve VIN, live data stream (with graphing display), O2 sensor test, onboard monitoring mode, and EVAP leak test.
  • 【Battery Voltage Check&DLC Pin Test】 It allows you to monitor battery health by testing current battery voltage. Plus, this obd2 diagnostic tool features DLC 16-PIN test to check current voltage of every pin.
  • 【Automotive Scanner Diagnostic Kit】 The package comes with 1 car scanner, 1 USB-type c cable, 1 hard storage bag and 1 user manual(en). Free to update without any hidden fees. 5 languanges available in setting including English, French, Italian, German and Espanish. Valuable and Portable, making it a great tool kit for car owners, DIY enthusiasts, and professional mechanics.
Bestseller No. 3
BlueDriver OBD2 Scanner Bluetooth, No Subscription, ABS SRS TPMS
  • [Diagnose Like a Pro] BlueDriver Pro is a professional OBD2 scanner and diagnostic tool that helps you scan, understand, and clear vehicle trouble codes with confidence. Turn your phone into a powerful car diagnostic scanner—no guesswork, no unnecessary repairs.
  • [Read and Clear More Codes Than Ever] Read and clear more codes than basic car code readers. Access enhanced diagnostics for Check Engine, ABS, SRS, Airbag, TPMS, Transmission.
  • [Verified Fixes and Real-Time Data] Get unlimited, technician-verified repair reports matched to your VIN, with definitions, causes, and confirmed fixes. Monitor live vehicle data as you drive, view freeze frames, check smog readiness, and analyze Mode 6 test results.
  • [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
  • [Broad Make & Model Coverage] Strong support for GM, Ford, Stellantis (RAM, Jeep, Chrysler), Toyota, Honda, Nissan, Mazda, Subaru, Hyundai, Mercedes-Benz, BMW, and VW.
Bestseller No. 4
Outzone B800 BMW SRS Airbag Reset Tool | OBDII Scanner Read & Clear Fault Codes | Fits E36/E46/E34/E38/E39/Z3/X5 (1994-2003) โ€“ Except 2001 330i
148 Reviews
Outzone B800 BMW SRS Airbag Reset Tool | OBDII Scanner Read & Clear Fault Codes | Fits E36/E46/E34/E38/E39/Z3/X5 (1994-2003) – Except 2001 330i
  • ✔️【Professional SRS Reset for 1994-2003 BMW】 Designed specifically for classic BMW models (1994-2003). This B800 scanner reads & clears SRS airbag fault codes, turns off the warning light, and saves you a costly dealer visit. Confirmed compatible with: E36, E46 (EXCEPT 2001 330i), E34, E38, E39, Z3, and X5 (E53). NOT compatible with any BMW built before 1994 or after 2003.
  • ✔️【Important: Two Different Connection Ports – Read Before Use】 To avoid “not working” issues, please note: For 1994–2000 BMWs (most E36, E34, Z3, early E39), the SRS diagnostic port is a round 20-pin connector under the hood. You MUST use the included 16-pin to 20-pin adapter cable. For 2000–2003 models (late E46, E39, X5), use the standard OBD-II port inside the cabin. Incorrect connection is the #1 reason for “incompatibility” reports.
  • ✔️【Read & Clear Fault Codes in Minutes】 Quickly diagnose why your SRS light is on. The scanner accurately reads fault codes from airbag and seatbelt pretensioner systems. With one button press, clear the codes and reset the SRS warning light in seconds. No expensive dealer tools needed.
  • ✔️【User-Friendly for DIYers – No Mechanic Required】 Easy operation with an intuitive button layout: ‘Enter’ to confirm, ‘Scroll’ to navigate. The clear LCD screen shows results instantly. Includes a step-by-step manual (revised for clarity) to guide you through the entire reset process.
  • ✔️【Reliable Support with 1-Year Warranty】 We stand behind the quality of our B800 scanner. It comes with a 1-Year Hassle-Free Warranty. If you have any questions or need support, please contact us with your Order ID, and our dedicated team will assist you promptly.
SaleBestseller No. 5
BLCKTEC 460T OBD2 Scanner Car Code Reader Engine ABS SRS Transmission Diagnostic Tool, 12 Reset Services, Oil/TPMS/EPB/BMS/SAS/DPF/Throttle Reset, ABS Bleeding, Battery Test, Auto VIN, Free Update
  • [All System Diagnostics, Professional-Level Scanner] - BLCKTEC 460T is the ultimate OBD2 diagnostic tool for home mechanics and professionals. It supports all 10 OBD2 modes, reads and clears Engine/Transmission/ABS/SRS codes, performs All-System Diagnostics, offers workshop reset tools, and provides real-time live data. It helps you pinpoint issues, assess your car's condition, and prepare for SMOG checks with ease. NOTE: Function availability depends on your vehicle. Before you buy, be sure to use the Compatibility Checker on BLCKTEC website or contact our customer support to verify that the features you need are supported for your vehicle’s specific year, make, and model.
  • [12+ Most Popular Reset Functions] - BLCKTEC 460T OBD2 scanner offers 12+ dealer-level service functions, including Oil Maintenance Reset, ABS Bleeding, EPB Reset, SAS(Steering Angle Sensor) Recalibration, DPF(Diesel Particulate Filter) Reset, Throttle Body Relearn, Battery Reset/Initialization, TPMS Relearn, Transmission Reset, Fluid Change Reset, Maintenance Reset and more, enabling you to perform workshop services like a pro. NOTE: Function availability depends on your vehicle. Be sure to use the Compatibility Checker on BLCKTEC website to verify that the features you need are supported for your vehicle.
  • [Real-Time OBD2 and OEM Live Data, Freeze Frame Data] - BLCKTEC 460T helps diagnose vehicle issues when warning lights like Check Engine Light or ABS/SRS Light appear. It offers detailed DTC info, ECU Freeze Frame Data, and real-time OBD2 and advanced OEM live data, including Engine, Transmission, ABS, SRS, and more, making it easy to diagnose and resolve vehicle problems. You can view, graph, record, replay, and overlay up to four live data streams in a single graph for better analysis.
  • [AutoVIN, AutoReLink, AutoScan, 3X Faster] - Equipped with AutoVIN technology, 460T automatically retrieves the VIN to save you time. Its AutoScan and AutoReLink features scan all of the vehicle's ECUs and detect any fault codes immediately after you plug the scanner into the vehicle's OBD2 port - no button presses required. Additionally, it regathers DTC and I/M readiness information every 30 seconds, simplifying monitor tests. 460T's advanced technology makes it 3X faster than other products.
  • [Get RepairSolutions2, the #1 Auto Repair App for Free] - When paired with RepairSolutions2(RS2) App, 460T becomes even more powerful. RS2's Verified Fix Database built by master technicians, provides the parts needed for the repair. Additionally, RS2 gives you access to OEM warranty info, maintenance schedules, TSB, and dealership recall info, making car care easier than ever. RS2 is free with no subscription fees and it stores your car scan reports in the cloud, allowing you to access, share, or print them anytime and anywhere.

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...