February 2, 2018
Fuel Leak in Engine Compartment
A fuel leak in the presence of an ignition source such as hot engine or exhaust components can increase the risk of a fire.
NHTSA Campaign Number: 18V090
Manufacturer Jaguar Land Rover North America, LLC
Components FUEL SYSTEM, GASOLINE
Potential Number of Units Affected 10,073
Summary
Jaguar Land Rover North America, LLC (Jaguar) is recalling certain 2018 Jaguar XE, XF, E-PACE, F-PACE and F-TYPE vehicles equipped with a 2.0L gasoline engine. The fuel rail end caps may leak, possibly resulting in fuel vapor or liquid fuel leaking into the engine bay.
Remedy
Jaguar will notify owners, and dealers will replace the fuel rail, free of charge. The recall began on March 8, 2018. Owners may contact Jaguar customer service at 1-800-452-4827. Jaguar's number for this recall is H081.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Jaguar has a Recall
| SAFETY RECALL H081 (NHTSA 18V090): UNDERHOOD PETROL FUEL LEAK | SERVICE BULLETIN |
| 13-MAR-18 | NO.: 7-145USA | SEC.: RECALL | MKT.: USA |
Jaguar Land Rover North America, LLC has informed the National Highway Traffic Safety Administration (NHTSA) of its intent to perform a Safety Recall on certain 2018 model year Jaguar E-PACE, F-PACE, F-TYPE, XE, and XF vehicles imported into the United States market. Information relating to this Recall will be posted on the National Highway Traffic Safety Administration website.
United States Federal regulations require that retailers must be notified within a reasonable time after the manufacturer decides that a defect that relates to motor vehicle safety or a noncompliance exists.
United States Federal law requires retailers to complete any outstanding safety Recall service before a new vehicle is delivered to the buyer or lessee. Violation of this requirement by a retailer could result in a civil penalty of up to $21,000.00 per vehicle.
This Recall Service Bulletin serves as notification to all Jaguar retailers in the United States and Federalized Territories that any affected new vehicles may not be sold and delivered for customer use until the Recall repair is completed.
| THIS BULLETIN UPDATES 7-142USA |
DESCRIPTION OF ISSUE
An issue has been identified on a limited number of vehicles within the listed Affected Vehicle Range for an underhood gasoline fuel leak. The brazing of the fuel rail end caps is inconsistent and may not provide the design condition, so not sealing the fuel rail ends. Fuel vapor and liquid fuel leaks can occur over time. This can lead to a liquid fuel leak into the engine bay.
AFFECTED VEHICLE RANGE
E-PACE (X540; Ingenium I4 2.0L Petrol)
Model Year: .................................. 2018
VIN: .................................................. SADFM2GX3J1Z00291-SADFL2FX3J1Z03437
F-PACE (X761; Ingenium I4 2.0L Petrol)
Model Year: .................................. 2018
VIN: .................................................. SADCL2FXXJA099558; SADCK2FX1JA243940 to SADCJ2FX0JA290251
F-TYPE (X152; Ingenium I4 2.0L Petrol)
Model Year: .................................. 2018
VIN: .................................................. SAJDD1GX1JCK51500-SAJDD1GX9JCK55584
XE (X760; Ingenium I4 2.0L Petrol)
Model Year: .................................. 2018
VIN: .................................................. SAJAL4FX9JCP18140-SAJAJ4GX7JCP36964
XF (X260; Ingenium I4 2.0L Petrol)
Model Year: .................................. 2018
VIN: .................................................. SAJBF4FX9JCY53890-SAJBE4FX9JCY64763
A total of 10,073 vehicles are potentially involved in the USA and Federalized Territories. Go to the Jaguar Business Network (JBN) website for a list of affected unsold (as of 07 February 2018) vehicles.
EFFECT ON VEHICLE OPERATION
A fuel odor may be noticed by the driver and they may also observe liquid fuel if the hood is lifted. Should leaking fuel come into contact with a sufficiently hot surface, there is an increased risk of fire.
SERVICE PROGRAM / REWORK ACTION
Owners will be notified by mail and instructed to take their vehicle to an authorized retailer who will replace the fuel rail. There will be no charge to owners for this action.
OWNER NOTIFICATION
Owner notification is expected to occur on or before the week of 14 March 2018.
ACTION TO BE TAKEN
Use the Jaguar Land Rover claims submission system to ensure that the vehicle is affected by Program Code ‘H081’ prior to undertaking any rework action.
Retailers are required to HOLD affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale pending completion of the rework action. Affected vehicles already in the hands of customers should be updated at the next available opportunity.
Jaguar Land Rover North America recommends that affected sales demonstrator and loaner vehicles are repaired before use and that used vehicles are repaired before sale. Retailers who choose to proceed against this recommendation, where legally permitted, must clearly and conspicuously disclose the open recall to the applicable customers.
Refer to Technical Bulletin H081NAS, SAFETY RECALL: Underhood Petrol Fuel Leak, for detailed repair instructions.
PARTS
NOTE: Jaguar Land Rover is currently placing and expediting initial parts allocations to all Retailers with sold vehicles to supply the available parts urgently. Initial parts order allocations for fuel rails and injector kits will be 30% (based on sold Retailer vehicles). Priority for these parts should be given to customer vehicles.
Due to supply constraints, Retailers are requested to place future orders following the restricted parts order guidelines for each brand. Use the vehicle’s VIN and quantity ‘1’ fuel rail and quantity ‘4’ injector kits per vehicle / per order.
Jaguar Land Rover will be temporarily managing restricted parts orders until more supply is available to help maintain parts availability for all retailers and customers.
| DESCRIPTION | PART NO. / SUNDRY CODE | QTY. / VALUE | EXPECTED PERCENTAGE DEMAND |
|---|---|---|---|
| Fuel rail | JDE40127 | 1 | 100 |
| Injector refit kit | T2H33724 | 4 | 100 |
TOOLS
Refer to the Technical Bulletin referenced above for any required special tools.
WARRANTY
NOTE: use the Jaguar Land Rover claims submission system to ensure that a vehicle is affected by this program prior to undertaking any rework action.
At the time of confirming a booking for vehicle repair, ensure that all outstanding Recall and Service Actions are identified to ensure the correct parts are available and adequate workshop time is allocated for repairs to be completed in one visit.
Warranty claims must be submitted quoting the Program Code together with the relevant Option Code. The SRO and parts information listed have been included for information only. The Option Code(s) that allows for the drive in/drive out allowance may only be claimed if the vehicle is brought into the workshop for this action alone to be undertaken.
Repair procedures are under constant review and therefore times / prices are subject to change; those quoted here must be taken as guidance only. Refer to the Jaguar Land Rover claims submission system to obtain the latest repair time.
Warranty claims must be submitted for payment within 30 calendar days of completion of the repair.
| PROGRAM CODE | OPTION CODE | DESCRIPTION | SRO | TIME (HOURS) | PARTS / SUNDRY CODE* | QTY. / VALUE* |
|---|---|---|---|---|---|---|
| H081 | A | Fuel rail - Renew | 19.60.13 | 1.0 - E-PACE (X540) 1.0 - F-PACE (X761) 0.9 - F-TYPE (X152) 0.9 - XE (X760) 1.0 - XF (X260) | JDE40127 T2H33724 | 1 4 |
| H081 | B | Fuel rail - Renew
Drive in/drive out | 19.60.13
10.10.10 | 1.0 - E-PACE (X540) 1.0 - F-PACE (X761) 0.9 - F-TYPE (X152) 0.9 - XE (X760) 1.0 - XF (X260) 0.2 | JDE40127 T2H33724
- | 1 4
- |
Normal Warranty policies and procedures apply.
TECHNICAL Q & A: SAFETY RECALL H081
Main Message: A concern has been identified on certain 2018 Model Year Jaguar E-PACE, F-PACE, F-TYPE XE, and XF vehicles, fitted with the INGENIUM I4 2.0L Petrol engine, for an underhood gasoline fuel leak. Liquid fuel may leak into the engine bay. Fuel odor may be noticed by the driver and they may also observe liquid fuel if the hood is raised.
| Q1 | Who do I contact if a member of the press contacts me about this recall? | ||
| A | Please ensure Press enquiries are referred to the Jaguar Land Rover North America Press Office to the attention of:.
| ||
| Q2 | Why is Jaguar Land Rover recalling certain Jaguar vehicles? | ||
| A | These vehicles are being recalled because this defect, leaking fuel, should it come into contact with a sufficiently hot surface, increases the risk of fire. | ||
| Q3 | Can you tell me more about what is wrong with the vehicles? | ||
| A | The brazing of the fuel rail end caps is inconsistent and may not provide the design condition, so not sealing the fuel rail ends. Fuel vapor and liquid fuel leaks can occur over time. This can lead to a liquid fuel leak into the engine bay. | ||
| Q4 | How would the customer become aware of potentially having this concern? | ||
| A | Fuel odor may be noticed by the driver and they may also observe liquid fuel if the hood is lifted. | ||
| Q5 | Does this concern affect vehicle safety? | ||
| A | Jaguar Land Rover is conducting this as this as a Safety Recall. | ||
| Q6 | Has Jaguar Land Rover received many complaints? | ||
| A | Jaguar Land Rover has a number of retailer/authorized repairer reports relating to this matter. | ||
| Q7 | Have there been any accidents or injuries? | ||
| A | Jaguar Land Rover is not aware of any accidents or injuries which have been attributed to this issue. | ||
| Q8 | How was the condition discovered? | ||
| A | The condition was highlighted through retailer/authorized repairer field reports. | ||
| Q9 | How long has Jaguar Land Rover known about this problem? | ||
| A | This issue started to be investigated in late November 2017. | ||
| Q10 | Is the defect leading you to any concerns regarding the reliability of a system, which is supposed to be designed and engineered for the passengers' safety? What type of measures are you planning to take? | ||
| A | We have no concerns with the overall reliability of the vehicle. Jaguar Land Rover carefully monitors field data to ensure that any matters relating to safety and compliance are rigorously investigated. | ||
| Q11 | What has Jaguar Land Rover done in production? | ||
| A | The component supplier has implemented a 100% parts internal inspection to confirm that brazing is complete as required inside the fuel rail. | ||
| Q12 | What will an authorized Jaguar retailer do to the vehicles? | ||
| A | Authorized retailers will replace the fuel rail. | ||
| Q13 | Which vehicles are affected by this recall in the USA? | ||
| A | The following Jaguar vehicles are affected: 2018MY E-PACE, F-PACE, F-TYPE XE, and XF manufactured between 5 December 2016 and 16 January 2018. | ||
| Q14 | Are other Jaguar Land Rover models affected by these actions? | ||
| A | Yes. This issue also affects the following Land Rover models: Discovery Sport, Range Rover Evoque, and Range Rover Velar manufactured between 26 April 2017 and 28 December 2017. | ||
| Q15 | Are parts available to rework vehicles? | ||
| A | Yes, the necessary parts will be available for authorized Jaguar retailers to conduct this repair. Expected timing for parts availability and repair publication is 13 March 2018. | ||
| Q16 | How much will the recall cost Jaguar Land Rover? | ||
| A | Cost was not a factor in deciding to recall these vehicles. | ||
| Q17 | How do I know if my Jaguar vehicle is affected? | ||
| A | All owners of potentially affected vehicles will shortly receive a letter inviting them to contact an authorized Jaguar retailer for the work to be carried out. The date for mailing is on or before 14 March 2018. For Retailers - all affected vehicles are flagged in DDW against the Program Number ‘H081’. | ||
| Q18 | How long does it take for the vehicle to be inspected and repaired? | ||
| A | The work will be carried out as quickly and efficiently as possible in order to minimize inconvenience to customers and is expected to take no longer than one (1) hour. Due to retailer schedules, vehicles may be required for longer. | ||
| Q19 | Can I continue to drive my Jaguar vehicle safely until it has been recalled? | ||
| A | Jaguar Land Rover is not recommending customers stop driving their vehicles but should fuel odor be detected or a liquid fuel leak observed, customers should park their vehicle is a safe well ventilated location and contact their retailer. |
H081NAS2
TECHNICAL BULLETIN
06 APR 2018
© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge, tools, and equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on some vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by 'do-it-yourselfers'. If you are not a Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Jaguar service facility to determine whether this bulletin applies to a specific vehicle.
Changes are highlighted in blue
SECTION:
303-04C/D/F: Fuel Charging and Controls
SUBJECT/CONCERN:
SAFETY RECALL: Underhood Petrol Fuel Leak
AFFECTED VEHICLE RANGE:
| MODEL: | MODEL YEAR: | VIN: | ASSEMBLY PLANT: | APPLICABILITY: |
| E-PACE (X540) | 2018 | Z00291-Z03437 | Graz (Austria) | INGENIUM I4 2.0L Petrol |
| F-PACE (X761) | 2018 | 099558 | Solihull | INGENIUM I4 2.0L Petrol |
| F-PACE (X761) | 2018 | 243940-290251 | Solihull | INGENIUM I4 2.0L Petrol |
| F-TYPE (X152) | 2018-2019 | K51500-K55584 | Castle Bromwich | INGENIUM I4 2.0L Petrol |
| XE (X760) | 2018 | P18140-P36970 | Castle Bromwich | INGENIUM I4 2.0L Petrol |
| XF (X260) | 2018 | Y53890-Y64763 | Castle Bromwich | INGENIUM I4 2.0L Petrol |
MARKETS:
NORTH AMERICA
CONDITION SUMMARY:
SITUATION:
An issue has been identified on certain vehicles within the listed Affected Vehicle Range for an underhood gasoline fuel leak. The brazing of the fuel rail end caps is inconsistent and may not provide the design condition, so not sealing the fuel rail ends. Fuel vapor and liquid fuel leaks can occur over time. This can lead to a liquid fuel leak into the engine bay.
Fuel odor may be noticed by the driver and they may also observe liquid fuel if the hood is lifted. Should leaking fuel come into contact with a sufficiently hot surface, there is an increased risk of fire.
ACTION:
Retailers are required to HOLD affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale pending completion of the Workshop Procedure detailed in this Technical Bulletin. Unsold vehicles should have this performed as part of the Pre-Delivery Inspection (PDI) process but must have it completed prior to vehicle handover to the customer.
Affected vehicles already in the hands of customers should be updated at the next available opportunity.
Order only the expected percentage demand of parts identified.
PARTS:
NOTE:
Order only the expected percentage demand of parts identified.
| DESCRIPTION | PART NO./SUNDRY CODE | QTY./VALUE | EXPECTED PERCENTAGE DEMAND |
|---|---|---|---|
| Fuel rail | JDE40127 | 1 | 100 |
| Injector refit kit | T2H33724 | 4 | 100 |
SPECIAL TOOLS:
Refer to TOPIx Workshop Manual/Workshop Procedure for any required special tools.
WARRANTY:
| NOTE: |
| Use the Jaguar Land Rover claims submission system to make sure that a vehicle is affected by this program prior to undertaking any rework action. |
At the time of confirming a booking for vehicle repair, make sure that all outstanding Recall and Service Actions are identified to ensure the correct parts are available and adequate workshop time is allocated for repairs to be completed at one visit.
Warranty claims must be submitted quoting the Program Code and the relevant Option Code; this will result in payment of the stated time. The SRO and parts information is included for information only. The Option Code(s) that allows for the drive in/drive out allowance may only be claimed if the vehicle is brought back into the workshop for this action alone to be undertaken.
Repair procedures are under constant review and therefore times / prices are subject to change; those quoted here must be taken as guidance only. Use the Jaguar Land Rover claims submission system to obtain the latest repair time.
Warranty claims must be submitted or payment within 30 calendar days of completion of the repair.
| PROGRAM CODE | OPTION CODE | DESCRIPTION | SRO | TIME (HOURS) | PARTS/SUNDRY CODE | QTY./VALUE |
|---|---|---|---|---|---|---|
| H081 | A | Fuel rail - Renew | 19.60.13 | 1.0 - E-PACE (X540) 1.0 - F-PACE (X761) 0.9 - F-TYPE (X152) 0.9 - XE (X760) 1.0 - XF (X260) | JDE40127 T2H33724 | 1 4 |
| H081 | B | Fuel rail - Renew
Drive in/drive out | 19.60.13
10.10.10 | 1.0 - E-PACE (X540) 1.0 - F-PACE (X761) 0.9 - F-TYPE (X152) 0.9 - XE (X760) 1.0 - XF (X260) 0.2 | JDE40127 T2H33724
- | 1 4
- |
Normal Warranty policies and procedures apply.
WORKSHOP PROCEDURE:
1
Replace the fuel rail (see TOPIx Workshop Manual section 303-04C/D/F: Fuel Charging and Controls - INGENIUM I4 2.0L Petrol - Removal and Installation - Fuel Rail).
5 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| JAGUAR | E-PACE | 2018 |
| JAGUAR | F-PACE | 2018 |
| JAGUAR | F-TYPE | 2018 |
| JAGUAR | XE | 2018 |
| JAGUAR | XF | 2018 |
34 Associated Documents
Manufacturer Notices(to Dealers,etc)- 05-MAR-18 - NOTIFICATION OF SAFETY RECALL H081 (NHTSA 18V090) - UPDATE
RCMN-18V090-0687Miscellaneous Document - Safety Recalls N138 and H081 - AJ20P 4 Cyl Gasoline Engines – Fuel Rail leaking
RMISC-18V090-2178.pdf 31.006KB
RMISC-18V090-2178ISSUED Owner Notification Letter(Part 577)
RCONL-18V090-1103.pdf 42.315KB
RCONL-18V090-1103Miscellaneous Document
RMISC-18V090-1849.pdf 158.972KB
Manufacturer Notices(to Dealers,etc)- 13-MAR-18 - SAFETY RECALL H081 (NHTSA 18V090): UNDERHOOD PETROL FUEL LEAK
RCMN-18V090-0139.pdf 531.369KB
RCMN-18V090-0139Miscellaneous Document - March 13, 2018 - H081 and N138 AJ200P Fuel leaks - Safety Recall Parts Deployment Notification
RMISC-18V090-7789.pdf 22.891KB
RMISC-18V090-7789Remedy Instructions and TSB
RCRIT-18V090-4329.pdf 91.687KB
RCRIT-18V090-4329Miscellaneous Document - H081 and N138 FUEL RAIL RECALLS
RMISC-18V090-7148.pdf 105.422KB
RMISC-18V090-7148Miscellaneous Document - [JAG US ALERTS] H081 and N138 Safety Recall Parts FAQ's
RMISC-18V090-4002.pdf 33.455KB
RMISC-18V090-4002Manufacturer Notices(to Dealers,etc)- H081 - Under Hood Petrol Fuel Leak: Injector Refit Kit Incorrect Installation Instruction
RCMN-18V090-4039.pdf 137.815KB
RCMN-18V090-4039ISSUED Owner Notification Letter(Part 577)
RCONL-18V090-1992.pdf 676.344KB
RCONL-18V090-1992Manufacturer Notices(to Dealers,etc)- 26-FEBRUARY-2018 - RETAILER BULLETIN - Service Loaner Vehicles Impacted by H081 and N138
RCMN-18V090-5210.pdf 100.851KB
RCMN-18V090-5210Miscellaneous Document - JAGUAR LAND ROVER H081 & N138 FUEL RAIL RECALL PARTS RELEASE UPDATE
RMISC-18V090-7721.pdf 53.271KB
Remedy Instructions and TSB
RCRIT-18V090-5768.pdf 92.492KB
RCRIT-18V090-5768Defect Notice 573 Report
RCLRPT-18V090-1430.PDF 218.658KB
RCLRPT-18V090-1430Recall 573 Report - AMENDMENT 2
RCLRPT-18V090-8249.PDF 217.609KB
RCLRPT-18V090-8249Recall Acknowledgement
RCAK-18V090-3230.pdf 245.802KB
RCAK-18V090-3230Miscellaneous Document - Chronology of Defect / Noncompliance Determination
RMISC-18V090-8688.pdf 124.718KB
RMISC-18V090-8688Recall 573 Report - AMENDMENT 1
RCLRPT-18V090-4688.PDF 218.658KB
Miscellaneous Document - New Safety Recalls N138 and H081 AJ200 4 Cyl Gasoline Engines
RMISC-18V090-4357.pdf 50.014KB
RMISC-18V090-4357Manufacturer Notices(to Dealers,etc)- NOTIFICATION OF SAFETY RECALL H081 (NHTSA 18V090)
RCMN-18V090-0965Recall Quarterly Report #2, 2018-2
RCLQRT-18V090-3923.PDF 214.626KB
RCLQRT-18V090-3923Miscellaneous Document - H081 and N138 Recall Status Slide
RMISC-18V090-2508.pdf 65.728KB
RMISC-18V090-2508Manufacturer Notices(to Dealers,etc)- PARTS DERESTRICTION NOTICE - SAFETY RECALLS H081 AND N138 FUEL RAIL PARTS
RCMN-18V090-3057.pdf 122.077KB
RCMN-18V090-3057Manufacturer Notices(to Dealers,etc)- SAFETY RECALL H081 (NHTSA 18V090): UNDERHOOD PETROL FUEL LEAK
RCMN-18V090-0202.pdf 607.371KB
RCMN-18V090-0202Miscellaneous Document - August Big 5 Monthly Business Update Recap - H081 and N138
RMISC-18V090-7770.pdf 119.671KB
RMISC-18V090-7770Miscellaneous Document - Fuel Rail Campaign Update
RMISC-18V090-5234.pdf 274.576KB
RMISC-18V090-5234Miscellaneous Document - Fuel Rail Campaign Update - Campaigns H081 and N138 - Parts Operations
RMISC-18V090-3786.pdf 274.576KB
RMISC-18V090-3786Miscellaneous Document - Parts Operations Update - Fuel Campaign & Rim Program Update
RMISC-18V090-8447.pdf 164.306KB
RMISC-18V090-8447Miscellaneous Document - Fuel Rail Campaign Update - Campaigns H081 & N138
RMISC-18V090-3867.pdf 249.611KB
RMISC-18V090-3867Recall Quarterly Report #1, 2018-1
RCLQRT-18V090-9516.PDF 214.52KB
RCLQRT-18V090-9516Miscellaneous Document - Big 5 Monthly Business Update Recap - H081 and N138
RMISC-18V090-1769.pdf 169.374KB
RMISC-18V090-1769Recall Quarterly Report #3, 2018-3
RCLQRT-18V090-4918.PDF 211.335KB
RCLQRT-18V090-4918Recall Quarterly Report #4, 2018-4
RCLQRT-18V090-1559.PDF 211.452KB
Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18V090&docType=RCL
- Add to fuel to help clean fuel injectors and restore injector spray patterns
- Adds lubricity to upper cylinders
- Helps recover lost MPG and reduce exhaust emissions
- Concentrated formula treats up to 25 gallons
- Safe for all types of gasoline fuel injection engines
- Cleans, restores, protects the entire fuel system (fuel injectors, carburetors, intake valves and combustion chambers)
- Restores: Lost power, acceleration, lost fuel economy, and operation of the fuel gauge sensor
- Reduces: Rough idle, engine surge, hesitation, and spark plus fouling
- Improves: Cold start performance, and fuel stability for up to one year
- Unclogs dirty fuel injectors to restore performance
- Helps restore lost power and acceleration
- Removes harmful deposits
- Saves gas
- Compatible with cap-less gas systems
- Lucas fuel treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected
- Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.
- Tan color
- 1 Quart
- 【Why Need It】The performance of the injector plays a vital role in the power of each engine. Due to the fuel quality, the injector cannot work normally, causing serious carbon deposits in the cylinder; accelerating the cylinder bore and piston ring, causing unstable idling, increased fuel consumption, weak acceleration, difficulty in starting, excessive emissions, and complete blockage of the injector. Cause damage to the engine, so the injector should be cleaned regularly.
- 【Digital Display】With the help of microcomputer control and digital display, the equipment makes possible automatic cleaning, testing injectors and real-time monitoring of the dynamic values.
- 【Automatic Cleaning and Testing】Fuel pressure control through microcomputer offers stable pressure control and largeadjustable range, which is suitable for all EGI vehicles and can help to achieve automatic cleaning and testing of injectors.
- 【Adopting Humanization Design】Automatic fuel draining through preset programs for some test items. Test liquid/detergent can also be drained by pushing a button on the control panel after the test.can make the system pressure fast restored to the default,The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.
- 【Reverse Flush】Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector,and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.
- 【Why Need It】The performance of the injector plays a vital role in the power of each engine. Due to the fuel quality, the injector cannot work normally, causing serious carbon deposits in the cylinder; accelerating the cylinder bore and piston ring, causing unstable idling, increased fuel consumption, weak acceleration, difficulty in starting, excessive emissions, and complete blockage of the injector. Cause damage to the engine, so the injector should be cleaned regularly.
- 【Reverse Flush】Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector,and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.
- 【Suitable for All EGI Vehicles】Fuel pressure control through microcomputer offers stable pressure control and large adjustable range, which is suitable for all EGI vehicles and can help to achieve automatic cleaning and testing of injectors.
- 【Clean Multiple Injectors At The Same Time】Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.
- 【Adopting Humanization Design】The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.With the help of microcomputer control and digital display, the equipment makes possible automatic cleaning, testing injectors and real-time monitoring of the dynamic values.can make the system pressure fast restored to the default values.
- Specially formulated to remove carbon deposits from engines with over 75, 000 miles
- Cleans fuel injectors, intake valves, and ports to restore performance and fuel economy
- Prevents future carbon build-up and reduces emissions
- Oxygen sensor safe and safe for use in turbocharged and supercharged vehicles
- Will not void OEM/manufacturer's
- NOTE: We do not provide any liquid in the package, Please buy liquid from your local market.Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely
- Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. T his test is also for reverse flush
- Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
- Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection. * Auto. test: To test injectors by simulating different working conditions.
- On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.
- Removes carbon deposits from key engine parts
- Prevents future carbon buildup on port/indirect fuel injectors, intake valves, and ports
- Maximizes engine performance and fuel economy
- Reduces emissions
- Oxygen sensor safe and safe for use in turbocharged and supercharged vehicles
- DESIGNED TO EXCEED EXPECTATIONS: Red Line complete SI-1 fuel system cleaner treatment for cleaning and preventing corrosion in fuel systems
- PERFORM AND PROTECT: Fuel additive cleans injectors, carburetors, valve and combustion chamber deposits with a powerful, concentrated blend of high-temp and low-temp detergents
- EFFICIENT FUEL BURN: Gas treatment that enhances gasoline stability, while reducing the build up of gum and varnish formation
- EASY TO USE: Use one bottle per tank for most effective treatment, additive cleans nearly 100% efficiency in one treatment
Last update on 2021-12-04 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2021-12-04 / Affiliate links / Images from Amazon Product Advertising API
